Days to Ship |
|
---|
MITUTOYO
Depth Micrometer Series 128 [FEATURES] Ø4mm measuring rod. With measuring rod clamp.With carbide-tipped measuring rod model is available. With ratchet stop for constant force. [Technical Data] Accuracy: ±3µm for micrometer head feed Graduation: 0.01mm or .001¡± Flatness of reference face: 1.3μm for 63.5mm width base, 2μm for 101.6mm width base Flatness of measuring rod face: 0.3μm Parallelism between reference face and measuring rod face:(4+L/50)μm, L=Max. measuring length (mm)Measuring rod diameter: 4mm *with carbide-tipped measuring rod
Configure Now
Ships as soon as | 12 Days |
---|
547 Series Depth Gauge, Digimatic Type
MITUTOYO
ABSOLUTE Digimatic Depth Gage Series 547 [FEATURES] ABSOLUTE Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery. Wide probing range is available with the supplied extension rod. Bottom surface of the base is hardened, ground and lapped for highest degree of flatness. With SPC data output. [Technical Data] Resolution*: 0.001mm, 0.01mm, .00005"/0.001mm or .0005”/0.01mm Flatness of base face: 5µm Measuring force: 1.4N, 1.5N Display: LCD Battery: SR44 (1 pc.), 938882 Battery life: Approx. 3.5 years under normal use [Function] Origin-set, Zero-setting,Data output, inch/mm conversion (inch/mm models) Alarm: Low voltage, Counting value composition error
Configure Now
Ships as soon as | 12 Days |
---|
MITUTOYO
FEATURES - Attached to a height gage to measure groove and hole depth.- Minimum hole diameter: 5.5mm- Maximum distance from the bottom of the holding bar to the contact point:80mm (metric type), 2.95” (inch type)- Uses standard dial indicator points900878 (with metric type holding bar)900764 (with inch type holding bar)
Configure Now
Ships as soon as | 12 Days |
---|
Digital Depth Gauge - Absolute, Series 571, Inch/Metric
MITUTOYO
• Coolant proof models achieve IP67 protection level.
• Enables stable depth measurement with a resolution of 0.01mm.
• ABSOLUTE Digital Caliper
• Sliding operation of models with the measuring ranges 150mm (6"), 200mm (8") and 300mm (12")
is smooth and comfortable.
• Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
• Optional longer extension bases are available.
(Except for models with measuring ranges of 600, 750, 1000mm)
Configure Now
Ships as soon as | 12 Days |
---|
ABSOLUTE Digimatic Depth Gauge
MITUTOYO
[Features] · With digits that are 20% bigger and a high-contrast LCD for reducing eye fatigue. · Conforms to CE standards. [Applications] · Depth measurement.
Configure Now
Ships as soon as | 12 Days |
---|
Depth Micrometer - Interchangeable Rod Type, Series 129/329
MITUTOYO
• This type uses interchangeable rods to enable wide-range measurement.
• Order No.329-350-30 allows integration into statistical process control and
measurement systems.
• Measuring rod diameter: ø4mm
• Measuring rod lock.
• Ratchet stop provides constant measuring force.
Configure Now
Ships as soon as | 12 Days |
---|
Series 7 Dial Indicator Depth Gauges
MITUTOYO
This rectangular base dial indicator depth gauge offers you the following benefits: Rectangular base. It has a hardened, precision ground and micro-lapped reference face on its base.
Configure Now
Ships as soon as | 14 Days |
---|
ABSOLUTE Digimatic Depth Gauge, 571-201-30
MITUTOYO
[Features] · With digits that are 20% bigger and a high-contrast LCD for reducing eye fatigue. · Conforms to CE standards. [Applications] · Depth measurement.
Configure Now
Ships as soon as | 12 Days |
---|
Depth Micrometer Series 128, 128-101
MITUTOYO
Depth Micrometer Series 128 [FEATURES] Ø4mm measuring rod. With measuring rod clamp.With carbide-tipped measuring rod model is available. With ratchet stop for constant force. [Technical Data] Accuracy: ±3µm for micrometer head feed Graduation: 0.01mm or .001¡± Flatness of reference face: 1.3μm for 63.5mm width base, 2μm for 101.6mm width base Flatness of measuring rod face: 0.3μm Parallelism between reference face and measuring rod face:(4+L/50)μm, L=Max. measuring length (mm)Measuring rod diameter: 4mm *with carbide-tipped measuring rod
Configure Now
Ships as soon as | 12 Days |
---|
TECLOCK
• Product Model: Depth Gauge
• Display Format: Dial
• Minimum Display (mm): 0.01
• With / Without measurement data output terminal: Not Included
• Application: Depth gage measures the depth or level differences in an object.
Configure Now
Ships as soon as | 4 Days |
---|
Depth Micrometer - Ratchet Stop, Series 128, 128-104
MITUTOYO
Depth Micrometer Series 128 [FEATURES] Ø4mm measuring rod. With measuring rod clamp.With carbide-tipped measuring rod model is available. With ratchet stop for constant force. [Technical Data] Accuracy: ±3µm for micrometer head feed Graduation: 0.01mm or .001¡± Flatness of reference face: 1.3μm for 63.5mm width base, 2μm for 101.6mm width base Flatness of measuring rod face: 0.3μm Parallelism between reference face and measuring rod face:(4+L/50)μm, L=Max. measuring length (mm)Measuring rod diameter: 4mm *with carbide-tipped measuring rod
Configure Now
Ships as soon as | 12 Days |
---|
Dial Depth Gauge - Small Hole Type, DM-220
TECLOCK
[Features]
· A depth gauge capable of measuring depths to 20 mm.
· The probe is an SK hardened product.
[Applications]
· Measures the depth and unevenness of the measured objects.
Configure Now
Ships as soon as | 6 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
Digital ABS Depth Gauge IP67, 0-200mm, 571-252-20
MITUTOYO
[Features]This Digital Depth Gauge is IP67 coolant proof and offers you the following benefits:ABSOLUTE System gives you reliable measurements. Its base and measuring faces are hardened and micro-lapped for robustness.It has excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid.Extremely resistant to both coolants and lubricants.
Configure Now
Ships as soon as | 12 Days |
---|
Digital Depth Gauge - 12 mm, DMD-210S2
TECLOCK
Easy-to-use popular model with a limited set of functions. Printer output is possible. Depth gage measures the depth or level differences in an object.
Configure Now
Ships as soon as | 4 Days |
---|
MITUTOYO
[Features]
By increasing the character height by 20%, the high contrast LCD reduces fatigue.
A CE standard product.
Implements comfortable slider operation that's uniform and stable.
For measuring depth.
Configure Now
Ships as soon as | 12 Days |
---|
SHINWA RULES
Digital depth gauge used for depth measurement in various places.
[Features]
· Made from carbon fiber, it is lightweight, non-rusting, and does not scratch the object being measured.
[Applications]
· For depth measurement.
Configure Now
Ships as soon as | 4 Days |
---|
[Kanon] Analog Narrow Hole Depth Gauge
NAKAMURASEISAKU
[Features]
· Optimal for measuring the depth of fine holes.
· The depth bar is 1.5 mm thin.
· Made of stainless steel (SUS420J2).
[Applications]
· Measuring depth of fine holes on PCBs, etc.
Configure Now
Ships as soon as | 4 Days |
---|
Depth Gauge Accessory - Depth Base Attachment, Inch/Metric
MITUTOYO
[Features]
· An attachment that makes it possible to measure depth accurately and easily by attaching to the depth measuring surface of a vernier caliper.
Configure Now
Ships as soon as | 12 Days |
---|
Depth Micrometer - Series 128, Inch
MITUTOYO
• Measuring rod diameter: ø4mm
• Measuring rod lock is attached.
*Measuring rod is attached on the rear side of the micrometer.
• Carbide-tipped measuring rod model is available.
• Ratchet stop provides constant measuring force.
Configure Now
Ships as soon as | 8 Days |
---|
Vernier Depth Gauge - 0-300 mm, Series 527, Metric
MITUTOYO
A Mitutoyo depth gauge.
[Measuring Part Material] Stainless Steel
Configure Now
Ships as soon as | 12 Days |
---|
Digital Depth Gauge - Stainless Steel, E-DPJ
NAKAMURASEISAKU
[Features]
· A depth gauge for measuring depth.
· The letters are larger than those of conventional products, increasing visibility.
· Made of stainless steel (SUS420J2).
[Applications]
· For measuring depth at machining sites.
Configure Now
Ships as soon as | 4 Days |
---|
NAKAMURASEISAKU
[Features]
· Optimal for measuring the depth of wide holes.
· A depth gauge optimal for measuring the depth of wide holes.
· ESDM model without span
Configure Now
Ships as soon as | 4 Days |
---|
527 Series, Depth Gauge with Hook VDS-H, 527-401
MITUTOYO
Vernier Depth Gage Series 527-Hook End Type Series 527 [FEATURES] The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement With fine adjustment models are available. Optional wider extension base are available.
Configure Now
Ships as soon as | 12 Days |
---|
Digital Depth Micrometer - Interchangeable Rod Type, 6 Rods, DMC-MX
MITUTOYO
This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock.
Configure Now
Ships as soon as | 17 Days |
---|
Vernier Depth Gauge - Series 527, Inch/Metric
MITUTOYO
• Standard gage for depth measurement.
• Optional longer extension bases are available.
(Except for models with measuring ranges of 600 and 1000mm)
Configure Now
Ships as soon as | 12 Days |
---|
129 Series, Interchangeable Rod Type Depth Micrometer DMC, 129-109
MITUTOYO
Series 129 This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock.
Configure Now
Ships as soon as | 12 Days |
---|
129 Series, Interchangeable Rod Type Depth Micrometer DMC, 129-110
MITUTOYO
Series 129 This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock.
Configure Now
Ships as soon as | 12 Days |
---|
Depth Micro Checker - Series 515, Metric
MITUTOYO
【Product Specifications】
・The Depth Micro Checker is designed to check and help set the range-end points of a depth micrometer.
Configure Now
Ships as soon as | 72 Days |
---|
Digital Depth Gauge - Mini, MMDG-25
MISUMI
・Probe with the tip of ø1.5 (diameter 1.5 mm), which can measure a pinhole.
· With hold function.
・With auto display off function.(Approx. 20 minutes)
・Minimum reading:0.01 mm.
[Applications]
・For depth measurement.
Configure Now
Ships as soon as | 4 Days |
---|
Depth Micrometer - Interchangeable Rod Type, Series 129, DMC
MITUTOYO
Series 129 This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock.
Configure Now
Ships as soon as | 12 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
Analog Depth Gauge - Pocket Type
FUJITOOLS
• Product Model: Depth Gauge
• Display Format: Analog
• With / Without measurement data output terminal: Not Included
• Base dimension (mm): 60
• Application: For measuring depth of grooves and holes, as well as speed of different levels.
Configure Now
Ships as soon as | 4 Days |
---|
Dial Depth Gauge - 230 mm, DM-224
TECLOCK
[Features]
· By using the attached extension, it supports measuring depths up to 230 mm.
[Applications]
· Depth gage measures the depth or level differences in an object.
Configure Now
Ships as soon as | 4 Days |
---|
Depth Gauge (for Use with Steps)
TECLOCK
[Features]
· Ideal for measuring groove depth of PCBs, etc.
· The probe is an SK hardened product.
[Applications]
· For measuring the depth of small holes and uneven surfaces.
Configure Now
Ships as soon as | 4 Days |
---|
MITUTOYO
• Standard gage for depth measurement.
• Optional longer extension bases are available.(Except for models with measuring ranges of 600 and 1000mm)
Configure Now
Ships as soon as | 12 Days |
---|
Digital Depth Gauge - 25 mm, EA725FE-6
ESCO
【Product Specifications】
・Measurement range-0 to 25mm
・Minimum division-0.001mm
・Maximum error-6μm
・Auto power off function
・Power supply-SR44 x 1 pc
・Length-167mm
・Material-High-carbon chromium steel
・Base width…101.5mm
Configure Now
Ships as soon as | 4 Days |
---|
Depth Micrometer SERIES 329, 129 - Interchangeable rod type
MITUTOYO
• This type uses interchangeable rods to enable wide-range measurement.
• Order Nos. 329-250-30, 329-251-30, 329-350-30, and 329-351-30 allow
integration into statistical process control and measurement systems.
• Measuring rod diameter: ø4mm
• Measuring rod lock.
• Ratchet stop provides constant measuring force.
Configure Now
Ships as soon as | 12 Days |
---|
Configure Now
Ships as soon as | 12 Days |
---|
Vernier Depth Gauge - 0-200 mm, Series 527, Metric
MITUTOYO
A Mitutoyo depth gauge.
[Measuring Part Material] Stainless Steel
Configure Now
Ships as soon as | 12 Days |
---|
Digital Depth Micrometer, 0-150mm, incl. 6 Rods, 329-250-30
MITUTOYO
This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock.
Configure Now
Ships as soon as | 12 Days |
---|
Depth Micrometer - Ratchet Stop, MC-F/MC-FS
NIIGATASEIKI
• Product Model: Depth Gauge
• Display Format: Analog
• Measurement Range (mm): 0–25
• Minimum Display (mm): 0.01
• With / Without measurement data output terminal: Not Included
Configure Now
Ships as soon as | 4 Days |
---|
Replaceable Rod Type Depth Micrometer
NIIGATASEIKI
• Product Model: Depth Gauge
• Display Format: Analog
• Minimum Display (mm): 0.01
• With / Without measurement data output terminal: Not Included
• Dimension B (mm): 9
Configure Now
Ships as soon as | 5 Days |
---|
Depth Gauge (for Use with Thick Film)
TECLOCK
[Features]
· Ideal for measuring the coating film thickness of painting, coating material, sealing material, etc.
· The probe is an SK hardened product.
[Applications]
· For measuring the depth of small holes and the thickness of coatings.
Configure Now
Ships as soon as | 4 Days |
---|
Dial Depth Gauge - 10 mm, T-2C
OZAKISEISAKUJO
• Product Model: Depth Gauge
• Display Format: Dial
• Base Outer Diameter (mm): φ25.0
• Feature: Ideal for measuring hole depth, depths of narrow grooves, and difference in levels. You can choose from abundant equipment types based on the application.
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
Days to Ship |
Product Model |
Display Format |
Measurement Range(mm) |
Minimum Display(mm) |
Instrument Error(mm) |
With / Without measurement data output terminal |
Calibration Certificate |
Brand | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | TECLOCK | MITUTOYO | TECLOCK | MITUTOYO | MITUTOYO | TECLOCK | MITUTOYO | SHINWA RULES | NAKAMURASEISAKU | MITUTOYO | MITUTOYO | MITUTOYO | NAKAMURASEISAKU | NAKAMURASEISAKU | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MISUMI | MITUTOYO | MITUTOYO | FUJITOOLS | TECLOCK | TECLOCK | MITUTOYO | ESCO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | NIIGATASEIKI | NIIGATASEIKI | TECLOCK | OZAKISEISAKUJO |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Digital Depth Micrometer - Interchangeable Rod Type, 6 Rods, DMC-MX | 129 Series, Interchangeable Rod Type Depth Micrometer DMC, 129-109 | 129 Series, Interchangeable Rod Type Depth Micrometer DMC, 129-110 | Depth Micrometer - Interchangeable Rod Type, Series 129, DMC | |||||||||||||||||||||||||||||||||||||||||
Days to Ship | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 12 Days | 14 Days | 12 Days | 12 Days | 4 Days | 12 Days | 6 Days | 12 Days | 12 Days | 4 Days | 12 Days | 4 Days | 4 Days | 12 Days | 8 Days | 12 Days | 4 Days | 4 Days | 12 Days | 17 Days | 12 Days | 12 Days | 12 Days | 72 Days | 4 Days | 12 Days | 12 Days | 4 Days | 4 Days | 4 Days | 12 Days | 4 Days | 12 Days | 12 Days | 12 Days | 12 Days | 4 Days | 5 Days | 4 Days | 4 Days |
Product Model | Depth Gauge | Depth Gauge | Accessories | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Accessories | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Accessories | Depth Gauge | Depth Gauge | Accessories | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | - | - | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge | Depth Gauge |
Display Format | Micro Meter Style | Digital | - | Digital | Digital | - | Dial | Digital | Micro Meter Style | Dial | Micro Meter Style | Dial | Analog | Digital | Digital | Digital | Digital | Analog | - | - | Analog | Digital | Analog | Analog | Digital | - | Micro Meter Style | Micro Meter Style | - | Digital | Micro Meter Style | - | Analog | Dial | Dial | Analog | - | - | Digital | Analog | Digital | Analog | Analog | Dial | Dial |
Measurement Range(mm) | 0–25 | 0 - 8” / 0-200mm ~ 0–200 | - | 0 - 6” / 0 - 150mm ~ 0 - 40” / 0 - 1000mm | 0 - 150 | - | 0 - 10mm ~ 0~210 | 0 - 150 | 0–25 | 0–5 ~ 0–20 | 0–25 | 0–20 | 0–200 ~ 0–300 | 0 - 200 | 0~12 | 0~450 ~ 0~750 | 0.1~25 | 0–150 | - | - | 0–300 | 0–150 ~ 0–300 | 0–150 ~ 0–1000 | 0–150 | 0 - 150 | - | 0–50 | 0–75 | - | 0 to 25 | 0–50 ~ 0–75 | - | 0–20 ~ 0–50 | 0~230 | - | 0~150 ~ 0~600 | - | 0 - 300 | - | 0–200 | 0 - 150 | 0–25 | 0–50 ~ 0–100 | 0–5 | 0–10 |
Minimum Display(mm) | 0.01 | .0005” / 0.01mm ~ 0.01 | - | .0005” / 0.01mm | 0.01 | - | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.05 | 0.01mm | 0.01 | - | 0.1 | - | - | - | 0.05 | 0.01 | - | 0.05 | 0.001 | - | 0.01 | 0.01 | - | - | 0.01 | - | 0.05 ~ 1 | 0.01 | 0.01 | 0.05 | - | - | - | 0.05 | 0.001 | 0.01 | 0.01 | 0.01 | - |
Instrument Error(mm) | ±0.03 | ±.001” | - | ±.001” | ±0.02 | - | - | ±0.02 | ±0.03 | ±0.010 ~ ±0.015 | ±0.03 | ±0.015 | ±0.05 ~ ±0.08 | ±0.02mm | ±0.02 | ±0.03 (Quantization Error: does not include ±1 count) ~ ±0.07 (Does not include quantizing error ±1 count) | ±0.2 | ±0.07 | - | - | ±0.08 | ±0.03 | ±0.03 ~ ±0.07 | ±0.05 | ±0.03 | - | - | - | - | - | - | - | ±0.05 ~ ±0.10 | ±0.015 | ±0.01 | ±0.05 ~ ±0.1 | - | - | - | ±0.05 | ±0.03 | ±0.004 | ±0.004 ~ ±0.005 | ±0.01 | ±0.015 |
With / Without measurement data output terminal | Not Included | Included | - | Included | Included | - | Not Included | Included | Not Included | Not Included | Not Included | Not Included | Not Included | Included | Not Included | Included | Not Included | Not Included | - | - | Not Included | Not Included | Not Included | Not Included | Included | - | Not Included | Not Included | - | Not Included | Not Included | - | Not Included | Not Included | Not Included | Not Included | - | - | - | Not Included | Included | Not Included | Not Included | Not Included | - |
Calibration Certificate | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy