MenuClose
Gauge Blocks
| Days to Ship |
|
|---|
-
Individual Metric Rectangular Gauge Blocks
MITUTOYO
• If using only one length repeatedly, it is a good idea to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry.Configure Now
Ships as soon as 8 Days -
Metric Rectangular Gage Block Set Series 516-1mm Base Block Set
MITUTOYO
[Features] · Made using high-carbon and high-chromium steel which has undergone repeated heat-treatment, limiting deterioration due to aging, even at extremes.
Configure Now
Ships as soon as 22 Days -
Single Item Block Gauge 1 Grade Equivalent Product
NIIGATASEIKI
• Set/Single Item: Single Item
• Material: Steel
• Thermal Expansion Coefficient: 11.5×10-6/K
• Material: High Carbon High Chrome SteelConfigure Now
Ships as soon as 4 Days -
Square Gauge Block Accessories, 619052
MITUTOYO
• To expand the application o.f square gauge blocks, Mitutoyo offers the Gauge Block Accessories sold in individual Piece or in Set. Square gauge blocks have a much broader range of application than rectangular gauge blocks due to the central clamping hole. Also, the accessories included in the set are sold individually depending on the application.
• Mitutoyo accessories are available for expanding the range of square gauge block applications, especially for rapid assembly of precision gages.Configure Now
Ships as soon as 12 Days -
Individual Metric Square Gauge Blocks
MITUTOYO
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Please add the suffix number representing the national standard and grade required at the end of the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• Mitutoyo accessory sets are available for expanding the range of square gauge block applications, especially for rapid assembly of precision gages.Configure Now
Ships as soon as 12 Days -
Individual Metric Rectangular Gauge Blocks
MITUTOYO
• If using only one length repeatedly, it is a good idea to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry.Configure Now
Ships as soon as 8 Days -
Individual , Inch Measurements Rectangular Gauge Blocks
MITUTOYO
• If using only one length repeatedly, it is a good idea to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of
Calibration which certifies that the gauge block was calibrated by interferometry.Configure Now
Ships as soon as 8 Days -
Micrometer Inspection Gage Block Sets - Series 516
MITUTOYO
【Product Specifications】
・The Mitutoyo Micrometer Inspection Gage Block set was designed specifically for micrometer inspection.Configure Now
Ships as soon as 32 Days -
Block Gauge - Grade 1 of JIS B7506 Equivalent
MISUMI
· A high accuracy block gauge equivalent to grade 1 of JIS B7506.
· Used for accuracy inspection of length measuring devices and as a high value-added part.
· Inspection report attachedConfigure Now
Ships as soon as 4 Days -
516 Series Gauge Block / Accessory Cerastone
MITUTOYO
Cerastone is a special ceramic grinding stone for chamfering. It can be used for CERA blocks and steel gauge blocks, and is perfect for chamfering on various precision machining surfaces. Ease of chamfering and durability are enhanced compared to that of Arkansas grinding stones. Can be used on both sides.
Configure Now
Ships as soon as 12 Days -
Accessory For Rectangular Gauge Block
MITUTOYO
[Features]
· An accessory for more effective use of rectangular gauge blocks.
· Can also be used for CERA blocks.Configure Now
Ships as soon as 12 Days -
Metric Square Gage Block Set, 112-Piece Set, 516-438-26
MITUTOYO
[Features]A Square Gage Block can retain stable orientation both longitudinally and laterally. A wide range of application measurements can be made, including cutting tool positioning, angle measurement with a sine bar, taper measurement with a roller, and inspection of depth micrometers. 1 pc. 1.0005mm block; 9 pcs. 1.001–1.009mm blocks Step of 0.001mm; 49 pcs. 1.01–1.49mm blocks Step of 0.01mm; 49 pcs. 0.5–24.5mm blocks Step of 0.5mm; 4 pcs. 25–100mm blocks Step of 25mm Grade: 0 Material: Steel
Configure Now
Ships as soon as 12 Days -
MITUTOYO
[FEATURES] Step master is a master gage used for the z-axis (vertical direction) calibration of optical instruments. Each adjacent step is measured down to 0.01µm by using a interferometer within ±0.20µm allowance. Steel and ceramic types are available.
Configure Now
Ships as soon as Quote -
Individual Inch Rectangular Gauge Blocks
MITUTOYO
• If using only one length repeatedly, it is a good idea to purchase individual gauge blocks.
• Nominal sizes which are not included in the chart below can be supplied custom-made on request.
• Each Grade K gauge block to ISO/DIN/JIS, BS or ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was calibrated by interferometry.Configure Now
Ships as soon as 8 Days -
Individual , Inch Measurements Square Gauge Blocks
MITUTOYO
• Purchasing individual metric square gauge blocks is a cost-effective way to replace
heavily used sizes.
• Please add the suffix number representing the national standard and grade required at the end of
the Order No. when ordering these items.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• Mitutoyo accessory sets are available for expanding the range of square gauge block applications,
especially for rapid assembly of precision gages.Configure Now
Ships as soon as 8 Days -
Micrometer Inspection Gage Block Set
MITUTOYO
• Gage blocks for inspecting a variety of Micro Checker micrometers.
• Can be measured in both vertical and horizontal posture.
• Parallelism is measured by attaching the optical parallel (optional accessory) to the gage block set.Configure Now
Ships as soon as 12 Days -
Block Gauge Set, Level 1 Equivalent Product
NIIGATASEIKI
• Set/Single Item: Set
• Material: Steel
• Material: High Carbon High Chrome SteelConfigure Now
Ships as soon as 4 Days -
Metric/Inch Rectangular Gauge Block Sets SERIES 516
MITUTOYO
Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the target applications, the level of convenience desired (larger sets offer more combination possibilities) and the environmental conditions in which they will be used.
Configure Now
Ships as soon as 12 Days -
Steel Micrometer Inspection Gage Block Set, Inch, 9 Blocks, with Optical Parallel, ASME Grade 0
MITUTOYO
• Gage blocks for inspecting a variety of Micro Checker micrometers.
• Can be measured in both vertical and horizontal posture.
• Parallelism is measured by attaching the optical parallel (optional accessory) to the gage block set.Configure Now
Ships as soon as 8 Days -
Accessory For Sukeya Gauge Block
MITUTOYO
[Features]
· Special accessory for maximizing the functions of a sukeya gauge block.
· The sukeya gauge block has an opening in the center for a wide application range far wider than that of a rectangular gauge block.Configure Now
Ships as soon as 12 Days -
Individual Inch Square Gauge Blocks
MITUTOYO
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Mitutoyo accessory sets are available for expanding the range of square gauge block applications, especially for rapid assembly of precision gages.Configure Now
Ships as soon as 8 Days -
Metric/Inch Rectangular Gauge Block Sets SERIES 516
MITUTOYO
Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the target applications, the level of convenience desired (larger sets offer more combination possibilities) and the environmental conditions in which they will be used.
Configure Now
Ships as soon as 17 Days -
Individual Metric Square Gauge Blocks
MITUTOYO
• Purchasing individual metric square gauge blocks is a cost-effective way to replace heavily used sizes.
• Special sizes that are not included in the charts can be supplied custom-made on request.
• Mitutoyo accessory sets are available for expanding the range of square gauge block applications, especially for rapid assembly of precision gages.Configure Now
Ships as soon as 12 Days -
- Economy
Micrometer Inspection Gauge Block Sets SERIES 516
MITUTOYO
• Dedicated gauge block sets for micrometer inspection.
Configure Now
Ships as soon as 12 Days -
Single Item Ceramic Block Gauge 0 Grade Equivalent Product
NIIGATASEIKI
• Set/Single Item: Single Item
• Material: Ceramic
• Thermal Expansion Coefficient: （9.5±1）×10-6/K
• Feature: Does not change due to aging. Iron powder, etc., will not stick.Configure Now
Ships as soon as 4 Days -
Single Item Block Gauge 0 Grade Equivalent Product
NIIGATASEIKI
• Set/Single Item: Single Item
• Material: Steel
• Thermal Expansion Coefficient: 11.5×10-6/K
• Material: High Carbon High Chrome SteelConfigure Now
Ships as soon as 4 Days -
![Single Unit Rectangular Gauge Block [Steel]](//us.misumi-ec.com/linked/material/fs/MTY1/PHOTO/223006028069_001.jpg?$product_view_b$)
Single Unit Rectangular Gauge Block [Steel]
MITUTOYO
[Features]
· Standard length provided by Mitutoyo.
· It is more practical to purchase a single unit gauge block if certain dimensions are frequently used.Configure Now
Ships as soon as 12 Days -
Configure Now
Ships as soon as 12 Days -
Steel Rectangular Gage Block Set, Inch, 81 Blocks, ASME Grade 0
MITUTOYO
• Gage blocks for inspecting a variety of Micro Checker micrometers.
• Can be measured in both vertical and horizontal posture.
• Parallelism is measured by attaching the optical parallel (optional accessory) to the gage block set.Configure Now
Ships as soon as 8 Days -
Block Gauge Set, Level 0 Equivalent Product
NIIGATASEIKI
• Set/Single Item: Set
• Material: Steel
• Material: High Carbon High Chrome SteelConfigure Now
Ships as soon as 5 Days -
Set Item Ceramic Block Gauge 0 Grade Equivalent Product
NIIGATASEIKI
• Set/Single Item: Set
• Material: Ceramic
• Feature: Does not change due to aging. Iron powder, etc., will not stick.Configure Now
Ships as soon as 4 Days -
Gauge Blocks with a Calibrated Coefficient of Thermal Expansion
MITUTOYO
• Mitutoyo offers top-quality gauge blocks (steel and ceramic), superior to K class blocks due to their advanced manufacturing technologies.
• Features an accurately calibrated thermal expansion coefficient measured with a proprietary double-faced interferometer (DFI).
• Each gauge block is calibrated for length on a highly accurate gauge block interferometer (GBI) system.
• Available as rectangular gauge blocks in the range 100 to 500mm.Configure Now
Ships as soon as 17 Days -
Maintenance Kit for Gauge Blocks SERIES 516
MITUTOYO
• Maintenance kit for gauge blocks includes all the necessary maintenance tools for removing burrs
and contamination, and applying anti-corrosion treatment after use, etc.Configure Now
Ships as soon as 12 Days -
MITUTOYO
• Thermal expansion in the temperature range 20±1ºC less than 1/500 that of steel
(0±0.02×10-6/K(20ºC))
• Almost no secular change both in dimension and coefficient of thermal expansion
• Complementary ultra-low thermal expansion and high specific rigidity
(Young's modulus/specific gravity)Configure Now
Ships as soon as 12 Days -
Metric Rectangular Gage Block Set Series 516-1mm Base Block Set, 516-959
MITUTOYO
[Features] · Made using high-carbon and high-chromium steel which has undergone repeated heat-treatment, limiting deterioration due to aging, even at extremes.
Configure Now
Ships as soon as 22 Days -
MITUTOYO
【Product Specifications】
・Hardened steel over HRC 55 Precision Ground throughoutConfigure Now
Ships as soon as 32 Days -
SHINWA RULES
[Features]
· Measuring joint/connection misalignment (misalignment of the diaphragm and flange).Configure Now
Ships as soon as 4 Days -
Accessory For Long Rectangular Gauge Block
MITUTOYO
[Features]
· Holes for extension have been added to all standard size gauge blocks with nominal dimensions of 125 mm or more. These holes are used to connect long gauge blocks, jaws, etc., and suppress errors caused tightening.
· Can also be used for CERA blocks.Configure Now
Ships as soon as 12 Days -
MITUTOYO
[Features]
· The gauge block maintenance set is an essential set of tools for use with a gauge block that enables chamfering before use, rust-proofing during close operations or after use, etc.Configure Now
Ships as soon as 12 Days -
MITUTOYO
• Thermal expansion in the temperature range 20±1ºC less than 1/500 that of steel (0±0.02×10-6/K(20ºC))
• Almost no secular change both in dimension and coefficient of thermal expansion
• Complementary ultra-low thermal expansion and high specific rigidity (Young's modulus/specific gravity)Configure Now
Ships as soon as 17 Days -
Accessories for Rectangular Gauge Blocks over 100mm SERIES 516
MITUTOYO
• Specially designed for standard size gauge blocks over 125mm which have two coupling holes on the body: coupling of two long gauge blocks and attachment of jaws is possible.
• These accessories can also be used for CERA blocks.Configure Now
Ships as soon as 12 Days -
Micro Checker for Micrometer Inspection Gauge Block Sets SERIES 516
MITUTOYO
• Dedicated gauge block sets for micrometer inspection.
Configure Now
Ships as soon as 12 Days -
9Pcs/Set, In, Rectangular, As-1, 516-935-26【9 Pieces Per Package】
MITUTOYO
- Steel Micrometer Inspection Gage Block Set, Inch, 9 Blocks, AS-1 - .0625,.100,.125,.200,.250,.300,.500,1,2in
Configure Now
Ships as soon as Quote
![Single Unit Rectangular Gauge Block [Steel]](http://us.misumi-ec.com/linked/material/fs/MTY1/PHOTO/223006028069_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Set/Single Item |
| Material |
| Nominal Size(mm) |
| Product Model |
| Calibration Certificate |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MITUTOYO | MITUTOYO | NIIGATASEIKI | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MISUMI | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | NIIGATASEIKI | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | NIIGATASEIKI | NIIGATASEIKI | MITUTOYO | MITUTOYO | MITUTOYO | NIIGATASEIKI | NIIGATASEIKI | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | SHINWA RULES | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO | MITUTOYO |
| Product Series | Metric Rectangular Gage Block Set Series 516-1mm Base Block Set | Steel Micrometer Inspection Gage Block Set, Inch, 9 Blocks, with Optical Parallel, ASME Grade 0 | Steel Rectangular Gage Block Set, Inch, 81 Blocks, ASME Grade 0 | Gauge Blocks with a Calibrated Coefficient of Thermal Expansion | Metric Rectangular Gage Block Set Series 516-1mm Base Block Set, 516-959 | Accessories for Rectangular Gauge Blocks over 100mm SERIES 516 | Micro Checker for Micrometer Inspection Gauge Block Sets SERIES 516 | 9Pcs/Set, In, Rectangular, As-1, 516-935-26【9 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days | 22 Days | 4 Days | 12 Days | 12 Days | 8 Days | 8 Days | 32 Days | 4 Days | 12 Days | 12 Days | 12 Days | Quote | 8 Days | 8 Days | 12 Days | 4 Days | 12 Days | 8 Days | 12 Days | 8 Days | 17 Days | 12 Days | 12 Days | 4 Days | 4 Days | 12 Days | 12 Days | 8 Days | 5 Days | 4 Days | 17 Days | 12 Days | 12 Days | 22 Days | 32 Days | 4 Days | 12 Days | 12 Days | 17 Days | 12 Days | 12 Days | Quote |
| Set/Single Item | Single Item | Set | Single Item | Single Item | Single Item | - | Single Item | Set | Single Item | Single Item | Single Item / Set | Set | Single Item | - | Single Item | Set | Set | - | - | Single Item | - | - | Single Item | - | Single Item | Single Item | Single Item | - | Set | Set | Set | - | - | Single Item | Set | Single Item | Single Item | Single Item | Single Item | - | - | Set | Set |
| Material | Ceramic / Steel | - | Steel | Steel | Steel | - | Ceramic / Steel / Carbide | Ceramic / Steel / Carbide | Steel | Ceramic | - | Steel | Ceramic / Steel | - | Steel | Steel | Steel | - | - | - | - | - | - | - | Ceramic | Steel | Steel | - | Steel | Steel | Ceramic | - | - | - | - | Steel | - | - | - | - | - | - | Steel |
| Nominal Size(mm) | - | - | 0.5 ～ 600 | - | 10mm ～ 50mm | - | - | - | 0.5 ～ 100 | - | 2 ～ 250 | - | - | - | - | - | 0.5 ～ 100 | - | - | - | - | - | - | - | 1 ～ 100 | 0.5 ～ 600 | 0.14 ～ 600 | - | - | 0.5 ～ 100 | 1 ～ 100 | - | - | - | - | - | - | - | - | - | - | - | - |
| Product Model | - | - | - | - | - | - | - | - | Body | - | Accessories | - | - | - | - | - | - | - | - | Accessories | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Accessories | Accessories | - | - | - | - |
| Calibration Certificate | - | - | - | - | - | Available | - | - | - | - | - | - | - | Available | - | - | - | - | - | - | - | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Single Unit Rectangular Gauge Block [Steel]](http://us.misumi-ec.com/linked/material/fs/MTY1/PHOTO/223006028069_001.jpg?$product_view_c$)
Loading...
Configure
Filters
-
Set/Single Item
-
Material
-
Metric / Inch
-
Nominal Size(mm)
- 0.14
- 0.5
- 0.997
- 1
- 1.004
- 1.005
- 1.007
- 1.009
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.10
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.20
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.30
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.40
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.60
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.70
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.80
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.90
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.10
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.20
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.30
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.40
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.60
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.70
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.80
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.90
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.10
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.20
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.30
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.40
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.60
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.70
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.80
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.90
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.10
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.20
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.30
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.40
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.60
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.70
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.80
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.90
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
- 6
- 6.5
- 7
- 7.5
- 8
- 8.5
- 9
- 9.5
- 10
- 10mm
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25mm
- 30
- 35
- 40
- 40mm
- 50
- 50mm
- 60
- 70.00
- 75
- 80.00
- 90.00
- 100
- 125
- 150
- 160
- 175
- 200
- 250
- 300
- 400
- 500
- 600
-
Product Model
-
Calibration Certificate
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy