All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- Connector
- Wire/Cable
- Crimp terminal
- Equipment supported cable
- Zip tie
- Cable gland
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Protection tube
- Duct/Wiring
- General purpose tool
- Dedicated tools
- Soldering supplies
- Personal computer/AV cable
- LAN/Network cable
- Cable with connector
- RS232C Cable
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Milling Cutter Insert / Holder
- Customized Straight Blade End Mill
- Dedicated Cutter
- Turning Tool
- Drill
- Screw Hole Related Tools
- Reamer
- Chamfering, Centering Tool
- Cutting Tool Related Equipment
- Step Drill
- Hole Saw
- Clean Key Cutter
- Core Drill (Tip Tool)
- Magnetic Drilling Machine Cutter
- Drill for Electric Drill
- Woodworking Drill Cutter
- Drill for Concrete
- Processing Tools
- Material Handling & Storage
- Tape Supplies
- Cushioning
- Stretch Film
- Cardboard
- Plastic Bag
- PP Band
- Magic Tape / Binding Tape
- Rubber Band
- String / Rope
- Cable Tie
- Label
- Labeler
- Cutter for Unpacking
- Packing Support Equipment
- Cloth / Sheet for Packing
- Carriage / Hand Truck
- Tool Wagon
- Tool Cabinet / Container Rack
- Lifter / Hand Pallet
- Container / Pallet
- Storage Supplies
- Shelf / Rack
- Workbench
- Hanging Clamp / Hanging Belt
- Jack / Winch
- Chain Block / Crane
- Bottle / Container
- Bike Storage
- Safety & General Supplies
- Lab & Clean Room Supplies
- General-purpose Equipment for Research
- Measurement Equipment for Research
- Research Equipment / Storage / Transportation Supplies
- Culture / Separation / Analysis Supplies
- Laboratory Containers
- Laboratory Essentials
- Laboratory Equipment
- Washing / Sterilization / Cleaning Supplies
- Clean Environment-Related Equipment
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components for Molding
- Components of Large Mold, Die Casting
- Injection Molding Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Engraver / Punch
| Days to Ship |
|
|---|
-
Taper Pin Punch (Round Cylinder)
PB SWISS TOOLS
[Features]
· The material is a PB original special spring steel, promising high strength and a long service life.
· This product with a nickel chrome plated surface is easy to grip, resistant to rust, and has a beautiful external appearance.
· Grip has been knurled for non-slip processing.Days to Ship: 4 Days or more -
Spare Point (For EA574E) EA574E-1
ESCO
【Product Specifications】
・Applicable Item No. …EA574E Spare Point
・Qty. Per Unit …1 PcsDays to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· The blade tip is thin and can cut clearly.
· The shape makes chips easily removable.
· The special quenching treatment achieves both high sharpness and cost reduction.
· It is embossed, so confirmation of dimensions is easy.
· This product has a black oxide finish (Parker finish).
[Applications]
· For making holes in belts, leather, vinyl, rubber, paper, cloth, etc.Days to Ship: 4 Days or more -
![[Alphabet & Number] Automatic Center Punch Marking Set EA591FA-3](//us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007208510.jpg?$product_view_b$)
[Alphabet & Number] Automatic Center Punch Marking Set EA591FA-3
ESCO
【Product Specifications】
・Marking adapter-Dia. 6 x 63mm
・Center punch adapter-Dia. 6 x 63mm
・Number (0 to 8)-3mm
・Body length-124mm
・Alphabet (A to Z)-3mm
・Holder-Dia. 15 x 42mm
・Mark overall length-65mm※ 6 and 9 are shared.Days to Ship: 4 Days or more -
Marking Pen for Metals, Heat-resistant Model (250°C)【3 Pieces Per Package】
MISUMI
A heat-resistant marking pen that is prided on being easy to write with. Works on non-metal materials as well
Days to Ship: 7 Days or more -
Days to Ship: 4 Days or more -
Parallel Pin Punch (Cylindrical)
PB SWISS TOOLS
Round-bodied parallel pin punch using PB original special spring steel, promising high strength and a long service life.
[Features]
· Safe, reliable operation. Robust, standing up to brutal use. Boasts unparalleled dimensional accuracy.
· Enhances work safety and economic efficiency.
· High hardness and excellent elasticity are achieved with special alloy steel and accurate heat treatment.
· When subjected to an excessive load, distortion is elastic and plastic, with no sudden breakages.
· This product with a nickel chrome plated surface is easy to grip, resistant to rust, and has a beautiful external appearance.
· Grip has been knurled for non-slip processing.
[Applications]
· Convenient for a variety of applications with stable accuracy, hardness, and toughness for commercial, industrial, and personal use.Days to Ship: 4 Days or more -
Automatic Center Punch (Small) EA574E
ESCO
【Product Specifications】
・Full length-120mm
・Point material-Carbon steel
・Ensures an easy striking at a desired point with one hand. (without misalignment))
・Spring force can be adjusted at the head.
・Name…BodyDays to Ship: 4 Days or more -
![[For EA574EG] Spare Point EA574EG-1](//us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007184939.jpg?$product_view_b$)
[For EA574EG] Spare Point EA574EG-1
ESCO
【Product Specifications】
・Applicable Item No. …EA574EG Spare Point
・Qty. Per Unit …1 pcsDays to Ship: 4 Days or more -
![[For EA652B] Carbide Needle EA652B-2](//us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007341361.jpg?$product_view_b$)
[For EA652B] Carbide Needle EA652B-2
ESCO
【Product Specifications】
・Applicable Item No. …EA652B, BA Spare Carbide Point
・Qty. Per Unit …1 pcsDays to Ship: 4 Days or more -
Days to Ship: Quote -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· Beautiful characters can be engraved using deep carving and a broad shank, with the carved markings lasting an extremely long time.Days to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· The grooves are deeper than those of other companies, and the shanks are thicker as well, so truly beautiful characters can be engraved, and the engravings last for an extremely long time.Days to Ship: 4 Days or more -
Holder-Type Precision Marking Set
Trusco Nakayama
[Features]
· It is accurate and durable. Made with alloy tool steel (equivalent to SKS).
· Engravings can be switched with one touch.
· As the shank part is φ25 mm, it can also be used for pressing.Days to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· It provides accurate drilling.
[Applications]
· For setting in a special large punching machine for drilling of round holes in iron and steel materials for bridges, girders, etc.Days to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· Suitable to remove taper pin, spring pin.
[Applications]
· For removing taper pin, spring pin, etc.Days to Ship: 4 Days or more -
Days to Ship: 12 Days or more -
PB SWISS TOOLS
Round-bodied center punch using PB original special spring steel, promising high strength and a long service life.
[Features]
· Safe, reliable operation. Robust, standing up to brutal use. Boasts unparalleled dimensional accuracy.
· This product with a nickel chrome plated surface is easy to grip, resistant to rust, and has a beautiful external appearance.
· Grip has been knurled for non-slip processing.
· Enhances work safety and economic efficiency.
· High hardness and excellent elasticity are achieved with special alloy steel and accurate heat treatment.
· When subjected to an excessive load, distortion is elastic and plastic, with no sudden breakages.
[Applications]
· Convenient for a variety of applications with stable accuracy, hardness, and toughness for commercial, industrial, and personal use.Days to Ship: 4 Days or more -
PB SWISS TOOLS
[Features]
· Uses special alloy. Achieves excellent toughness and elasticity in addition to the high hardness of 58 to 60 HRC.Days to Ship: Quote -
Parallel Pin Punch Set (Octagon Cylinder) 750
PB SWISS TOOLS
Octagonal-bodied parallel pin punch set using PB original special spring steel, promising high strength and a long service life.
[Features]
· Safe, reliable operation. Robust, standing up to brutal use. Boasts unparalleled dimensional accuracy.
· Enhances work safety and economic efficiency.
· High hardness and excellent elasticity are achieved with special alloy steel and accurate heat treatment.
· When subjected to an excessive load, distortion is elastic and plastic, with no sudden breakages.
· Holder included.
· 750B has environmentally friendly packageless specifications. Package included with 750BCN.
[Applications]
· Convenient for a variety of applications with stable accuracy, hardness, and toughness for commercial, industrial, and personal use.Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
ESCO
【Product Specifications】
・Handle overall length-114mm
・For peeling of seal and springDays to Ship: 4 Days or more -
ESCO
【Product Specifications】
・Full length-100mm
・Tip dia.-1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16Days to Ship: 4 Days or more -
Chisel & Punch 14 Pcs Set EA572MA-3
ESCO
【Product Specifications】
・Center punch (shaft dia. x overall length) -9.5 x 130mm
・Solid punch (tip dia. x overall length) -3.2 x 130mm, 4.8 x 130mm
・Pin punch (tip dia. x overall length)-2.4 x 115mm, 3.2 x 120mm, 4.0 x 130mm, 4.8 x 130mm, 6.4 x 150mm
・Lineup punch (tip dia. x overall length)-3.2 x 200mm
・Cold chisel (blade width x overall length)-6.5 x 130mm, 9.5 x 140mm,13 x 150mm, 16 x 170mm,19 x 180mm
・Chrome vanadium steelDays to Ship: 4 Days or more -
Replacement Scriber (For EA574EC-130A) EA574EC-130BA
ESCO
【Product Specifications】
・Point material-Special tool steel
・Striking force can be adjusted.
・For EA574EC-130ADays to Ship: 4 Days or more -
Leather Punch Replacement Blade EA576F-138
ESCO
【Product Specifications】
・For EA576F-30, -50, -50A
・Dim.…38mmDays to Ship: 4 Days or more -
![[Nylon] Cutting Board For Leather Punch EA576FC-1](//us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007191072.jpg?$product_view_b$)
[Nylon] Cutting Board For Leather Punch EA576FC-1
ESCO
【Product Specifications】
・Dim.-150 x 100 x 10(t)mm
・Weight-190g
・Material-Nylon 6
・This board allows clean punching without damaging the punch.Days to Ship: 4 Days or more -
ESCO
【Product Specifications】
・Full length-96 to 100mm
・With knurling
・Material-S45C
・Dim. (mm)…5, 6, 8, 9, 13Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
ESCO
【Product Specifications】
・Length-150mm
・Point Material-Special Hard
・Storable point
・Since the point is gripped by the claw, length of the point can be adjusted.
・Name-BodyDays to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· The grooves are deeper than those of other companies, and the shanks are thicker as well, so truly beautiful characters can be engraved, and the engravings last for an extremely long time.Days to Ship: 4 Days or more -
Manual Engraving Tool Alphabet
Trusco Nakayama
[Features]
· The grooves are deeper than those of other companies, and the shanks are thicker as well, so truly beautiful characters can be engraved, and the engravings last for an extremely long time.Days to Ship: 4 Days or more -
Trusco Nakayama
[Features]
· Iron, aluminum, brass, copper, plastic, glass, stone, wood, and various other materials can be engraved.
· The body is ABS resin.
· Inscribes letters via vibration.
· It is for 100 VAC (50/60 Hz) only.
· Tip of the vibration pen is φ3.4 mm.
· A tool for engraving letters on non-ferrous metals, plastics or the like. It uses a 100 VAC power source.Days to Ship: 4 Days or more
![[Alphabet & Number] Automatic Center Punch Marking Set EA591FA-3](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007208510.jpg?$product_view_b$)
![[For EA574EG] Spare Point EA574EG-1](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007184939.jpg?$product_view_b$)
![[For EA652B] Carbide Needle EA652B-2](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007341361.jpg?$product_view_b$)
![[Nylon] Cutting Board For Leather Punch EA576FC-1](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007191072.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Days to Ship |
| Model |
| Punch Detailed Type |
| Sizes(mm) |
| Major Diameter(mm) |
| Overall Length(mm) |
| Character Size(mm) |
| Name |
| Hole Diameter(mm) |
| Display Size(mm) |
| Actual Size(mm) |
| Width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
| Brand | PB SWISS TOOLS | ESCO | Trusco Nakayama | ESCO | MISUMI | MOKUBA | PB SWISS TOOLS | ESCO | ESCO | ESCO | URATANISHOJI | EARTH MAN | H H H | MINITOR | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | URATANISHOJI | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | SK 11 | SK 11 | AMACHO | SIGNET | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | ESCO | MIERASEN | MOKUBA | MOKUBA | MINITOR | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama |
| Product Series | [Alphabet & Number] Automatic Center Punch Marking Set EA591FA-3 | Marking Pen for Metals, Heat-resistant Model (250°C)【3 Pieces Per Package】 | Pneumatically Driven Engraving Pen "Work Marker" Replacement Pen Tip | ||||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 7 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | Quote | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 12 Days or more | 4 Days or more | Quote | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more |
| Model | Punch | - | Punch | - | Punch | Punch | Punch | - | - | - | Numbering Imprinter | Punch | Punch | Inscription Pen | Digits engraving set | Letters engraving set | Precision Stamp | Punch | Punch | Molded Date Mark | Punch | Punch | Punch | Punch | Punch | Precision Stamp | Punch | - | - | - | - | - | - | - | - | - | - | - | Punch | Punch | Punch | Inscription Pen | Bulk Imprinter (Digits) | Bulk Imprinter (Digits) | Inscription Pen |
| Punch Detailed Type | Pin | - | Belt | - | Others | Center | Pin | - | - | - | - | - | Packing | - | - | - | - | Standard | Pin | - | Center | - | Pin | - | - | - | Pin | - | - | - | - | - | - | - | - | - | - | - | Long Hole | Pin | Pin | - | - | - | - |
| Sizes(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 16 | 1.5 ～ 16 | - | - | - | - | - | - | - | - | - | - | 2 ～ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 16 | 1.5 ～ 16 | - |
| Major Diameter(mm) | - | - | 6 ～ 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 100 ～ 140 | - | 85 ～ 140 | - | 160 | 100 ～ 150 | 100 ～ 140 | - | - | - | - | - | - | 140 | - | - | - | - | - | 10 ～ 14 | 90 ～ 100 | - | - | 130 ～ 160 | 83 | - | 115～180 | - | - | - | - | - | - | - | - | - | - | - | - | 150 | - | - | - | - | 163.8 |
| Character Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Name | - | - | - | - | - | - | - | - | - | - | 1.5 ～ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hole Diameter(mm) | - | - | 1 ～ 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.0、1.5、2.0、2.5、3.0、3.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Display Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10X25 ～ 20X30 | - | - | - | - | - | - |
| Actual Size(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9 ～ 31.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11.5X26.5 ～ 21.5X31.5 | - | - | - | - | - | - |
| Width(mm) | - | - | - | - | - | 9.52 ～ 12.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 ～ 35 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 9.52 ～ 12.7 | - | - | - | - | 47 |
![[Alphabet & Number] Automatic Center Punch Marking Set EA591FA-3](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007208510.jpg?$product_view_c$)
![[For EA574EG] Spare Point EA574EG-1](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007184939.jpg?$product_view_c$)
![[For EA652B] Carbide Needle EA652B-2](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007341361.jpg?$product_view_c$)
![[Nylon] Cutting Board For Leather Punch EA576FC-1](http://us.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007191072.jpg?$product_view_c$)
Loading...
Configure
Specification/Dimensions
-
Model
-
Punch Detailed Type
-
Metric / Inch
-
Sizes(mm)
-
Major Diameter(mm)
-
Overall Length(mm)
-
Character Size(mm)
-
Name
-
Hole Diameter(mm)
- 1
- 1.0、1.5、2.0、2.5、3.0、3.5
- 1.5
- 2
- 2.5
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
-
Display Size(mm)
-
Actual Size(mm)
-
Width(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Engraver / Punch
-
- Wrench / Box Wrench / Ratchet Wrench
- Allen Wrench
- Monkey Wrench
- Torque Wrench
- Socket Wrench
- Torque Wrench
- Screwdriver
- Torque Driver
- Pliers / Nippers / Pincers
- Hammer
- Tool Set / Tool Box
- Cutter Knife
- Chisel
- Driver Bit
- Socket Bit
- Crowbar / Lever
- Puller
- Tweezers
- Engraver / Punch
- Vehicle Maintenance Tool
- Water Supply / Air-Conditioning Piping Tool
- Cutting Tool
- Insulation Tool
- Sheet Metal Tool
- Explosion-proof Tool
- Caulking Tool
- Electric Pliers
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy