MITUTOYO Calipers

• 

  500 Series, ABS Digimatic Caliper CD-AX (MITUTOYO)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  ABSOLUTE Digimatic Caliper 500 Series (MITUTOYO)

  MITUTOYO

  • ABSOLUTE electromagnetic induction linear encoder system is introduced (except for 0 - 300mm/0 - 12" models).
  • New ergonomic design with finger rest.
  • The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements. This button will also allow return to the absolute (ABS) mode and display of the true position from the origin (usually jaws closed point).
  • Large and clear LCD readout.
  • Smooth slider movement makes for comfortable operation.
  • 18,000 hours battery life.
  • Allows step measurement.
  • Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
  • Allows integration into statistical process control and measurement systems for models with measurement data output connector.

  Configure Now

  Ships as soon as	4 Days

• 

  573-721-20, Digital ABS Point Caliper, Fine Type, Inch/Metric, 0-6", IP67, Thumb Roller, Series 573 (MITUTOYO)

  MITUTOYO

  These point calipers have extra fine ground measuring jaws.
  They offer you the following benefits:
  Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.

  Configure Now

  Ships as soon as	7 Days

• 

  SuperCaliper SERIES 500 — No battery or origin reset needed for IP67 digital caliper (MITUTOYO)

  MITUTOYO

  • Top-of-the-line digital caliper. Solar type caliper with no battery and IP67 protection assures
  waterproof reliability.
  • With no annoying origin restoration necessary, a measurement can be started any time and
  there is no restriction on operating speed.
  • The impact resistance of the display unit has been increased for improved usability in
  workshop conditions.
  • Waterproof function makes this SuperCaliper suitable for use in an environment containing
  large amounts of cutting fluid or coolant. Operability is equivalent to the mechanical
  type caliper.
  • This SuperCaliper uses components that do not contain harmful substances.
  • Slider operation is smooth and comfortable.

  Configure Now

  Ships as soon as	7 Days

• 

  Dial Caliper Series 505 (MITUTOYO)

  MITUTOYO

  • Newly designed dial movement for ultrasmooth sliding and high shock protection.
  • Easy-to-read yellow dial.
  • Large finger-rest aids ease-of-use.
  • Jaw tips are relieved for easy measurement of thin parts.
  • Allows step measurement.

  Configure Now

  Ships as soon as	4 Days

• 

  Digimatic 0-12''/300MM IP67 Stainless Steel Digital Caliper, 500-754-20 (MITUTOYO)

  MITUTOYO

  Product Type: Digital Caliper
  Features: Coolant Proof, Rolling Thumb Wheel, Control Buttons on Face, Inch/mm, Absolute Scales
  Jaw Depth: 2-1/2"
  Resolution: 0.0005"/0.01mm
  Accuracy: +/-0.0015"/0.03mm
  Caliper Range: 0-12"/0-300mm
  Material: Stainless Steel
  IP Rating: 67
  

  Configure Now

  Ships as soon as	4 Days

• 

  500 Series ABS Digimatic Caliper CD-SC/SCT, Solar Type (MITUTOYO)

  MITUTOYO

  This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
  You can operate it in just 60 lux ambient lighting.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  [Usage]
  ●Step measurement, inner measurement, outer measurement, depth measurement, and the like.
  [Specification]
  ●Instrument Error(mm):±0.02
  ●Power Supply: Solar Battery
  ●With measurement data output terminal
  

  Configure Now

  Ships as soon as	7 Days

• 

  530 Series, Type M Standard Vernier Calipers N/N-W (MITUTOYO)

  MITUTOYO

  Vernier Calipers Series 530 - Standard Model
  Series 530
  [FEATURES]
  Measures OD (outside diameter), ID (inside diameter), depth, and steps.
  The small vernier face angle (14°) provides easy reading.
  Dual reading scales on vernier. (metric/inch and inch models only)
  Lock screw for holding thesliding jaw position.
  Carbide-tipped jaw type calipers are also available.
  Supplied with vinyl holster in fitted carton. Except 600mm / 24” models are carton only. 1000mm / 40” supplied in wooden case.
  [Technical Data]
  Graduation: 0.05mm, 0.05mm (1/128”) or .001” (1/128”)
  High accuracy type: 0.02mm or 0.02mm (.001”)

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series ABS Coolant Proof Caliper, 500-714-10 (MITUTOYO)

  MITUTOYO

  This IP67 ABSOLUTE digimatic caliper allows reliable measurements in a wide range of situations and offers you the following benefits:
  Excellent resistance against water and dust (IP67 protection level) enabling use in machining situations that include splashing coolant fluid
  It is dustproof, complies with EN60529 and withstands temporary complete immersion in water without suffering any damage.
  Extraordinarily long battery life
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.

  Configure Now

  Ships as soon as	7 Days

• 

  ABSOLUTE Coolant Proof Caliper SERIES 500 — with Dust/Water Protection Conforming - IP67 Level (MITUTOYO)

  MITUTOYO

  • ABS Coolant Proof Caliper with Dust/Water Protection conforming to IP67 Level.
  Can be
  used in workshop conditions exposed to coolant, water, dust or oil. 100% air-leak test
  ensures every caliper conforms to IP67.
  • Font height is 9mm (increased by 22%) and visibility is improved
  (except for 0 - 300mm/ 0 - 12" models).
  • Battery cap does not require a screw driver for battery replacement
  (except for 0 - 300mm / 0 - 12" models).
  • Extended battery life of 5 years due to low current integrated circuit
  (except for 0 - 300mm/0 - 12" models).
  • Easy to use — advanced ergonomic design uses only 1 button.
  • Incorporates Mitutoyo's ABSOLUTE measurement system. No need to reset the origin.
  • The automatic power-on/off function shuts down the LCD display after 20 minutes inactivity,
  but the ABS scale origin is unaffected. Power is restored to the display when the slider is moved.
  • Stepped features can be measured.
  • Can be integrated into statistical process control and measurement systems.
  • An inspection certificate is supplied as standard.
  (However, this cannot be used as a calibration certificate as it is undated.)

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series Long-Type ABS Digimatic Caliper CD-C (MITUTOYO)

  MITUTOYO

  [Features]
  ●Since ABS(absolute) scale with absolute origin is built in, zero set for each power on is unnecessary. Because over speed error never occurs, reliability also improves.　
  ●CE standard product.
  [Usage]
  ●Step measurement, inner measurement, outer measurement, etc.
  [Specification]
  ●Minimum Display(mm):0.01
  ●Power Supply: Button Type Silver Oxide Battery(SR44) x 1(accessory)
  ●With measurement data output terminal

  Configure Now

  Ships as soon as	7 Days

• 

  ABSOLUTE Digimatic Caliper 500 Series, 500-153, 500-501-10 (MITUTOYO)

  MITUTOYO

  • ABSOLUTE electromagnetic induction linear encoder system is introduced(except for 0 -300mm/0 - 12" models).
  • New ergonomic design with finger rest.
  • The ZERO/ABS button allows the display to be Zero-Set at any slider positionalong the scale for comparison measurements. This button will also allow return tothe absolute (ABS) mode and display of the true position from the origin(usually jaws closed point).
  • Large and clear LCD readout.
  • Smooth slider movement makes for comfortable operation.
  • 18,000 hours battery life.
  • Allows step measurement.• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
  • Allows integration into statistical process control and measurement systems for models with measurement data output connector.
  

  Configure Now

  Ships as soon as	7 Days

• 

  Dial Caliper, Titanium-Coated Type (MITUTOYO)

  MITUTOYO

  [Features]
  · Calipers for taking readings using a rack and pinion driven expansion mechanism.
  · Stable, shock-proof structure that further improves impact resistance.
  · The titanium coating protects against wear.
  [Applications]
  · Step measurement, outside measurement, inside measurement and depth measurement.

  Configure Now

  Ships as soon as	7 Days

• 

  Long ABSOLUTE Digimatic Caliper 500 Series — with Exclusive ABSOLUTE Encoder Technology (MITUTOYO)

  MITUTOYO

  • Long Digital caliper incorporating an ABSOLUTE scale and available with a measuring range
  from 450mm to 1000mm.
  • Allows step measurement.
  • Allows integration into statistical process control and measurement systems for models
  with measurement data output connector.

  Configure Now

  Ships as soon as	7 Days

• 

  Digimatic Caliper, 0-12"/0-300mm Range.0005"/0.01mm Resolution, 500-193-30 (MITUTOYO)

  MITUTOYO

  Range: 0-12"/0-300mm
  Resolution: .0005"/0.01mm
  Large and clear LCD readout The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison measurements, this switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point Carbide-tipped jaw type calipers are also available With thumb roller Supplied in fitted plastic case Without SPC output

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series Long-Type ABS Digimatic Caliper CD-C, 500-502-10 (Mitutoyo)

  MITUTOYO

  [Features]
  ●Since ABS(absolute) scale with absolute origin is built in, zero set for each power on is unnecessary. Because over speed error never occurs, reliability also improves.　
  ●CE standard product.
  [Usage]
  ●Step measurement, inner measurement, outer measurement, etc.
  [Specification]
  ●Minimum Display(mm):0.01
  ●Power Supply: Button Type Silver Oxide Battery(SR44) x 1(accessory)
  ●With measurement data output terminal

  Configure Now

  Ships as soon as	7 Days

• 

  Vernier Caliper 531 Series - with thumb clamp (MITUTOYO)

  MITUTOYO

  • The slider moves only when the spring-loaded thumb grip is depressed.
  • Allows step measurement

  Configure Now

  Ships as soon as	7 Days

• 

  160 Series, C/CM Long Vernier Calipers C/CM, 160-127 (Mitutoyo)

  MITUTOYO

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, Super Caliper CD67-S PM/PS (MITUTOYO)

  MITUTOYO

  This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
  Waterproof reliability
  Impact resistance of the display unit for improved usability in workshop conditions
  It operates in only 60 lux ambient lighting.
  Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
  Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, IP67ABS Coolant-Proof Caliper CD-PS/PM (MITUTOYO)

  MITUTOYO

  This IP67 ABSOLUTE digimatic caliper allows reliable measurements in a wide range of situations and offers you the following benefits:
  Excellent resistance against water and dust (IP67 protection level) enabling use in machining situations that include splashing coolant fluid
  It is dustproof, complies with EN60529 and withstands temporary complete immersion in water without suffering any damage.
  Extraordinarily long battery life
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-180-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	22 Days

• 

  Series 505 Dial Caliper (MITUTOYO)

  MITUTOYO

  FEATURES
  •New designed dial movement for ultrasmooth sliding and high-shock protection.
  • Improved finish on sliding surfaces for longevity.
  •New face for improved readability.
  • Lock screw for dial bezel and for holding the sliding jaw position.
  •Can measure OD, ID, depth and steps.
  •Models available with carbide-tipped OD and ID jaws.
  • Supplied in fitted plastic case.

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series ABS Digimatic Caliper CD-SC/SCT, Solar Type, 500-445 (Mitutoyo)

  MITUTOYO

  This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
  You can operate it in just 60 lux ambient lighting.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  [Usage]
  ●Step measurement, inner measurement, outer measurement, depth measurement, and the like.
  [Specification]
  ●Instrument Error(mm):±0.02
  ●Power Supply: Solar Battery
  ●With measurement data output terminal
  

  Configure Now

  Ships as soon as	12 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-155-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  160 Series, C/CM Long Vernier Calipers C/CM (MITUTOYO)

  MITUTOYO

  Configure Now

  Ships as soon as	7 Days

• 

  ABSOLUTE Coolant Proof Caliper SERIES 500 — with Dust/Water Protection Conforming - IP67 Level, 500-752-20, 500-753-20, 500-762-20 (MITUTOYO)

  MITUTOYO

  • ABS Coolant Proof Caliper with Dust/Water Protection conforming to IP67 Level.
  Canbe used in workshop conditions exposed to coolant, water, dust or oil.
  100% air-leak test ensures every caliper conforms to IP67.
  • Font height is 9mm (increased by 22%) and visibility is improved (except for 0 - 300mm/ 0 - 12" models).
  • Battery cap does not require a screw driverfor battery replacement (except for 0 - 300mm / 0 - 12" models).
  • Extended battery life of 5 years due to low current integrated circuit (except for 0 - 300mm/0 - 12" models).
  • Easy to use — advanced ergonomic design uses only 1 button.
  • Incorporates Mitutoyo's ABSOLUTE measurement system. No need to reset the origin.
  • The automatic power-on/off function shuts down the LCD display after 20 minutes inactivity, but the ABS scale origin is unaffected. Power is restored to the display when the slider is moved.
  • Stepped features can be measured.
  • Can be integrated into statistical process control and measurement systems.
  • An inspection certificate is supplied as standard. (However, this cannot be used as a calibration certificate as it is undated.)

  Configure Now

  Ships as soon as	4 Days

• 

  Series 573 ABSOLUTE Low Force Caliper, 573-291-30 (MITUTOYO)

  MITUTOYO

  [Features]
  Due to the low measuring force these calipers are ideal for elastic or resilient workpieces such as plastic parts and rubber parts that standard calipers cannot measure.
  With SPC data output.
  Supplied in fitted plastic case.
  
  [Technical Data]
  Accuracy: Refer to the list of specifications.
  Resolution: 0.01mm or .0005"/0.01mm
  Display: LCD
  Length standard: ABSOLUTE electrostatic capacitance type linear encoder
  Measuring force: 0.49N to 0.98N (50gf to 100gf)
  Jaw retraction: 0.3mm
  Max. response speed: Unlimited
  Battery: SR44 (1 pc.), 938882
  Battery life: Approx. 3.5 years under normal use

  Configure Now

  Ships as soon as	Quote

• 

  Absolute Coolant-Proof Digimatic Caliper 0-12"/300mm Range .0005"/0.01mm Resolution, 500-764-20 (MITUTOYO)

  MITUTOYO

  Range: 0-12"/300mm
  Resolution: .0005"/0.01mm
  Accuracy: ±.0015"
  Can be used in workshop conditions exposed to coolant, water, dust or oil Easy to use - no need to wipe or clean the scale Advanced design styling Incorporates absolute measurement system Automatic power-on/off With SPC data output With thumb roller Supplied in fitted plastic case

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, Super Caliper CD67-S PM/PS, 500-776 (Mitutoyo)

  MITUTOYO

  This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
  Waterproof reliability
  Impact resistance of the display unit for improved usability in workshop conditions
  It operates in only 60 lux ambient lighting.
  Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
  Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-157-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  534 Series, Long-Jaw, Long Vernier Calipers CM-L (MITUTOYO)

  MITUTOYO

  Vernier Caliper, Long Jaw, Fine Adjust.
  0-750mm, 0,02mm, Metric
  These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
  They offer you the following benefits:
  Long jaws enable you to measure hard-to-reach workpiece features.
  The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.

  Configure Now

  Ships as soon as	Quote

• 

  Vernier Caliper 530 Series — Standard model (MITUTOYO)

  MITUTOYO

  • Stepped graduation face prevents dust ingress between the main scale and slider.
  • The small vernier face angle (14°) provides easy reading.
  • Can measure outside and inside dimensions, depth, and steps.
  • Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
  • Decimal and fractional graduated scales (metric/inch and inch models only).

  Configure Now

  Ships as soon as	7 Days

• 

  ABSOLUTE Digimatic Caliper 500 Series — with exclusive ABSOLUTE Encoder Technology (MITUTOYO)

  MITUTOYO

  • ABSOLUTE electromagnetic induction linear encoder system is introduced
  (except for 0 - 300mm / 0 - 12" models).
  
  • New ergonomic design with finger rest.
  • The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale
  for comparison measurements. This button will also allow return to the absolute (ABS) mode
  and display of the true position from the origin (usually jaws closed point).
  • Large and clear LCD readout.
  • Smooth slider movement makes for comfortable operation.
  • 18,000 hours battery life.
  • Allows step measurement.
  • Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
  • Allows integration into statistical process control and measurement systems for models
  with measurement data output connector.

  Configure Now

  Ships as soon as	4 Days

• 

  Long ABSOLUTE Digimatic Caliper 500 Series - with Exclusive ABSOLUTE encoder technology (MITUTOYO)

  MITUTOYO

  • Long Digital caliper incorporating an ABSOLUTE scale and available with a measuring range
  from 450mm to 1000mm.
  • Allows step measurement.
  • Allows integration into statistical process control and measurement systems for models
  with measurement data output connector.

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series ABSOLUTE Digimatic Caliper - with Exclusive ABSOLUTE Encode Technology, 500-173-30 (MITUTOYO)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.It keeps track of its origin point once set. Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement. No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Technical Data]
  - Accuracy: Refer to the list of specifications- Resolution: 0.01mm or .0005"/0.01mm- Repeatability: 0.01mm / .0005”- Display: LCD- Max. response speed: Unlimited- Battery: SR44 (1 pc.), 938882- Battery life: Approx. 3.5 years under normal useFunctionOrigin-set, Zero-setting, Data output, inch/mm conversion(inch/mm models ONLY)Alarm: Low voltage, Counting value composition error

  Configure Now

  Ships as soon as	7 Days

• 

  530 Series, Type M Standard Vernier Calipers N/N-W, 530-335 (Mitutoyo)

  MITUTOYO

  Vernier Calipers Series 530 - Standard Model
  Series 530
  [FEATURES]
  Measures OD (outside diameter), ID (inside diameter), depth, and steps.
  The small vernier face angle (14°) provides easy reading.
  Dual reading scales on vernier. (metric/inch and inch models only)
  Lock screw for holding thesliding jaw position.
  Carbide-tipped jaw type calipers are also available.
  Supplied with vinyl holster in fitted carton. Except 600mm / 24” models are carton only. 1000mm / 40” supplied in wooden case.
  [Technical Data]
  Graduation: 0.05mm, 0.05mm (1/128”) or .001” (1/128”)
  High accuracy type: 0.02mm or 0.02mm (.001”)

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series ABS Digimatic Caliper CD-SC/SCT, Solar Type, 500-454 (Mitutoyo)

  MITUTOYO

  This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
  You can operate it in just 60 lux ambient lighting.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  [Usage]
  ●Step measurement, inner measurement, outer measurement, depth measurement, and the like.
  [Specification]
  ●Instrument Error(mm):±0.02
  ●Power Supply: Solar Battery
  ●With measurement data output terminal
  

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series ABS Digimatic Caliper CD-SC/SCT, Solar Type, 500-455 (Mitutoyo)

  MITUTOYO

  This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
  You can operate it in just 60 lux ambient lighting.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
  [Usage]
  ●Step measurement, inner measurement, outer measurement, depth measurement, and the like.
  [Specification]
  ●Instrument Error(mm):±0.02
  ●Power Supply: Solar Battery
  ●With measurement data output terminal
  

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, Super Caliper CD67-S PM/PS, 500-777 (Mitutoyo)

  MITUTOYO

  This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
  Waterproof reliability
  Impact resistance of the display unit for improved usability in workshop conditions
  It operates in only 60 lux ambient lighting.
  Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
  Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-181-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-158-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-152-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  500 Series, ABS Digimatic Caliper CD-AX, 500-154-30 (Mitutoyo)

  MITUTOYO

  Series 500
  [FEATURES]
  Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers.
  It keeps track of its origin point once set.
  Whenever turned on, the large LCDdisplays the actual slider position ready to start measurement.
  No more repeatedzero setting is necessary with the absolute encoder technology, as well as no moreconcern for over speed errors.
  Large and clear LCD readout.
  The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements.
  This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  Data Hold Unit (959143) is optional.
  Carbide-tipped jaw type calipers are also available.
  With thumb roller. Except 500-500-10, 500-501-10,500-502-10.
  Supplied in fitted plastic case. Except 1000mm / 40” supplied in wooden case.
  [Usage]
  Step measurement, inner measurement, outer measurement, depth measurement, and the like.

  Configure Now

  Ships as soon as	7 Days

• 

  ABSOLUTE Solar Caliper SERIES 500 — No battery or origin reset needed (MITUTOYO)

  MITUTOYO

  • Mitutoyo's Absolute Solar Digimatic Caliper retains its origin point indefinitely.
  • At 60 Lux and above the ABSOLUTE solar caliper is ready to start measurement.
  No more repeated zero setting caused by a shortage of light.
  • An ABSOLUTE scale is incorporated so that zero setting is not required at each power ON.
  No danger of overspeed errors.
  • Slider operation is smooth and comfortable.
  • Allows step measurement.
  • Allows integration into statistical process control and measurement systems for models
  with measurement data output connector.

  Configure Now

  Ships as soon as	7 Days

• 

  Digimatic Caliper Mycal Lite 8", 700-123-10 (MITUTOYO)

  MITUTOYO

  MyCAL-Lite
  SERIES 700 — Digital Caliper for DIY
  FEATURES
  • The MyCAL-Lite is an ideal measuring tool for the DIY market.
  • The LCD screen allows error-free readout of measurements.
  •With depth measuring bar.

  Configure Now

  Ships as soon as	7 Days

Loading...