MenuClose
Linear Ball Bearings
Filter by Product Type
-
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications.
Part of the milli series, the most widely used series in Japan.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Flanged Linear Ball Bearing - Single
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Linear Ball Bearing - LMU/SLMU Series
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
The most standard type in linear ball bushing products.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Flanged Linear Ball Bearing - Double
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Easy to assemble with bolt-on flanges. The Opposite Counterbored Hole Type is also available.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Rectangular Flanged Linear Ball Bearing - Single, LMK Series
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Round Flanged Linear Ball Bearing - Single, LFM Series
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and fitting is easily achieved by bolting directly to the housing.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pillow Block Linear Ball Bearing - Single, Wide
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to be tightly secured to a workpiece through four mounting holes.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Pillow Block Linear Ball Bearing - Single, Aluminum Housing, SC Series
THK
Case unit has standard-type linear bushing embedded in small lightweight aluminum case. Can be mounted by simply bolting to table.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Center Flanged Linear Ball Bearing - Double
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
A load can be placed near the center of the linear bushing to evenly distribute the load and space.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Linear Ball Bearing - Single, LME Series
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. It is part of the milli size series, which is in general use in Europe.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Oval Flanged Linear Ball Bearing - Single, LMH Series
THK
The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Linear Ball Bearing - Double, Long
THK
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads and reduces assembly time.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pilot Flanged Linear Ball Bearing - Double
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pilot Flanged Linear Ball Bearing - Single
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of no seal types are added. [3/31/23]
Prevents the linear bushing from protruding toward the opposite side of its mounting side and enables to retain a sufficient space on the opposite side.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Flanged Linear Ball Bearing - Single, Inch Measurements
MISUMI
• Precision: High Grade
• TYPE: Flange
• Motion: Linear Motion
• Style: Standard
• Outer Cylinder Material: 52100 Bearing Steel Equivalent- Volume Discount is available
- Available in INCH
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Short Linear/Rotary Ball Bearing - Single or Double
MISUMI
Capable of rotary motion, finite linear motion, and the combination of both.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Linear Ball Bearing - Single or Double, Compact
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
2mm smaller in O.D. (D dimension) than Standard Type.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Rectangular Flanged Linear Ball Bearing - Double, Steel Housing, Long Type
THK
Type with LMF-L type flange having flats at 4 locations. Due to a lower core height, this type is more suitable for compact designs than the round flange type.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Short Linear Ball Bearing - Single
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Since the O.A.L. are shorter than the Single Type, space saving designing in L direction is possible.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Flanged Linear Ball Bearing - Double, LHF Series
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Flanged Linear Ball Bearing - Double, Long Type
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pillow Blocks Linear Ball Bearing - Double, Long, Wide
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Spec-designed to save the time of manufacturing a housing and installing a linear bushing, and to be tightly secured to a workpiece through four mounting holes.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pilot Flanged Linear Ball Bearing - Double, Long Body
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Bolt-on flange offers assembly convenience. The Long, Pilot Type is designed in such a way that the linear bushing does not protrude toward the opposite side of the linear bushing mount side, and retains a sufficient space on the opposite side.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Flanged Linear Ball Bearing - Single, Compact
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
This Compact Type is 4~5mm smaller in flange diameter (H Dim.) and 2mm smaller in O.D. (D Dim.) than Standard Type.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Mini Flanged Linear Ball Bearing - Single
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
O.D. of these bushings is designed to be 5 to 8mm smaller than those of conventional flanged linear bushings to save space.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Linear Ball Bearing - Single, LM Series
IKO
The IKO Linear Bushing is a high-precision linear motion rolling guide that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls, and the like are built compactly in the external cylinder. Models are available in abundant sizes and can be selected according to the application.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
- Special Discount Until 10/20/2023
- New Products
Pillow Block Linear Ball Bearing - Single, LSHSS/SLHSS Series
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
The compact type is Max. 6mm lower in height (H dimension) and Max. 3mm smaller in width (W dimension) than the Standard Type.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Flanged Linear Ball Bearing with Rotary Capability
MISUMI
• TYPE: Flange
• Motion: Linear/Rotary
• Style: Standard
• Outer Cylinder Material: 52100 Bearing Steel Equivalent
• Flange Type: Standard Flange- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pillow Block Linear Ball Bearing
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
MISUMI original. Height of Mounting Surface ~ Shaft Center is selectable.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· In the ST type, the balls and ball cage are embedded in the inner side the of outer cylinder, which has been precision ground to ensure a cylindrical form
· The balls are arranged in a staggered form to that the load is equally distributed
· The ball cage is a machined cage made out of lightweight and highly rigid light alloy.
· A slide ring and retainer ring are provided on two sides of the internal diameter of the outer cylinder to prevent overrun of the ball cage.
· With this structure, it is possible to achieve rotating, linear and mixed action with a low friction coefficient.
· Stroke length can be up to double the range of movement of the ball cage within the outer cylinder
· Suitable for a wide range of applications where it is necessary to obtain high accuracy at a low price, including the ink roll parts of a printing machine, the work chuck of a punching press work, press feeders, the work head of an electric discharge machine, the correction device of a take-up roll, textile machines, strain measuring equipment, optical measuring device spindle, copiers, etc.
· Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Pilot Flanged Linear Ball Bearing - Single, Threaded Mounting Holes, Compact
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Allows to reduce the cost for tapping, takes effect in connecting soft materials and can be screw-tightened from above.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Oval Flanged Linear Ball Bearing - Double, Long
THK
Flange is oval-shaped. More suitable than the LMK-L type for compact designs due to lower core height.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Linear Ball Bearing - Single, LM-GA Series
THK
[Features]
· Standard type. Equivalent to LM type of widely used milli size series, but including metal retainer.- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Linear Ball Bearing - Single, Inch Measurements, U-LMU Series
MISUMI
• Precision: High Grade
• TYPE: Straight
• Motion: Linear Motion
• Style: Standard
• Outer Cylinder Material: 52100 Bearing Steel Equivalent- Volume Discount is available
- Available in INCH
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Linear Ball Bearing - Inch Measurements
Thomson Linear
Precision Steel Ball Bushing bearings offer great improvements in efficiency, productivity, and accuracy over high-friction plain bearings flat-ways. The all-steel design makes the bearing product line perfect for replacing plain bearings in high temperature applications.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Linear Ball Bearing - Single, Stainless Steel
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. Part of the milli series, the most widely used series in Japan.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Pillow Block Linear Ball Bearing - Single, Compact
THK
Case unit is based on LM case unit SC-type with standard linear bushing embedded in small lightweight aluminum case. Compared to the SC type, this type is more suited for compact designs. Any mounting direction is acceptable and lifetime performance is enhanced due to 2 races of load-bearing balls on the case upper face.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Pilot Flanged Linear Ball Bearing - Double, LMI/LMI-L Series
THK
[Features]
· Pilot flange type linear bushing.
· Available in 3 types, round, rectangular and round with chamfering. Each of these is also available as a long type.Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Pillow Block Linear Ball Bearing - Double, Long
THK
SC long type. The case unit has 2 standard type linear bushings embedded in an aluminum case.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Pilot Center Flanged Linear Ball Bearing - Double
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) and more of electroless Ni-plated types are added. [3/31/23]
Full Length is 1.5 times of Single and Allowable Moment 4.3 times. Suitable for insufficient space for Double Type- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Special Environment–Compatible Ball Bushing Unit, Long Type
ASK LINEAR
[Features]
· A unit known for its high rigidity due to the integrated flange structure.
· Two types of materials, FCD45 and SUS304, are available for outer cylinder.Configure Now
Ships as soon as 7 Days -
Linear Ball Bearing - Single, Inch Measurements, SUPER Series
Thomson Linear
The Super Ball Bushing bearing is self-aligning, lightweight and adjustable with a low coefficient of friction.
The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications. Radially floating bearing plates. When installed in an adjustable housing, the Super Ball Bushing Bearing may be adjusted to a specific diametrical fit-up for accurate and repeatable movement.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
- New Products
Flanged Linear Ball Bearing - Double, Lubrication Fitting
MISUMI
New grease options (Type A: Alvania Grease S2, Type Y: AFF by THK) are added. [3/31/23]
Easy maintenance with Grease Fitting for lubrication.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- New Products
Pillow Block Linear Ball Bearing - Inch Measurements
THK
The POWER LINEAR BUSH has extremely smooth and quiet motion due to a uniquely designed ball retainer and outer sleeve. They are constructed of engineering polymer, which is lightweight, low friction and highly wear-resistant.
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Pillow Block Linear Ball Bearing - MX Lubrication Unit, Wide
MISUMI
Automatic Lubricateion drastically decreases Maintenance Frequency Maintenance Cost Reduction Realizable Product
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Product Type |
| Motion |
| Style |
| Outer Cylinder Material |
| Outer Cylinder Surface Finish |
| For Shaft Diameter(mm) |
| For Shaft Size(in) |
| Overall Length L(mm) |
| Overall Length L(in) |
| Flange Type |
| Lubrication Type |
| Outer Diameter D(mm) |
| Outer Diameter D(in) |
| Type |
| Length |
| Ball Recirculating Type |
| Precision |
| Eccentricity(µm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | MISUMI | MISUMI | MISUMI | THK | THK | MISUMI | THK | MISUMI | THK | THK | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | MISUMI | THK | MISUMI | MISUMI | MISUMI | MISUMI | IKO | MISUMI | MISUMI | MISUMI | THK | MISUMI | THK | THK | MISUMI | Thomson Linear | THK | THK | THK | THK | MISUMI | ASK LINEAR | Thomson Linear | MISUMI | THK | MISUMI |
| Product Series | Rectangular Flanged Linear Ball Bearing - Single, LMK Series | Pillow Block Linear Ball Bearing - Single, Aluminum Housing, SC Series | Rectangular Flanged Linear Ball Bearing - Double, Steel Housing, Long Type | Pillow Block Linear Ball Bearing - Single, LSHSS/SLHSS Series | Pilot Flanged Linear Ball Bearing - Single, Threaded Mounting Holes, Compact | Linear Ball Bearing - Single, Inch Measurements, U-LMU Series | Pilot Flanged Linear Ball Bearing - Double, LMI/LMI-L Series | Linear Ball Bearing - Single, Inch Measurements, SUPER Series | Pillow Block Linear Ball Bearing - MX Lubrication Unit, Wide | ||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Product Type | Straight | Flange | Straight | Flange | Flange | Flange | Housing | Housing | Flange | Straight | Flange | Straight | Flange | Flange | Flange | Straight | Straight | Flange | Straight | Flange | Flange | Housing | Flange | Flange | Standard Flange | Straight | Housing | Flange | Housing | Straight | Pilot Flange | Flange | Straight | Straight | Straight | Straight | Housing | Flange | Housing | Flange | Flange | Straight | Standard Flange | Housing | Housing |
| Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | - | Linear Motion | Linear/Rotary | Linear Motion | Linear/Rotary | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion | Linear Motion |
| Style | Standard / Open | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Open | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Open | Standard | Standard | Standard | - | Standard | Standard | Standard / Open | Standard | Standard | Standard / Open | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Outer Cylinder Material | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | - | Steel | Steel | Steel | Steel | - | Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel | Steel | - | Steel | - | Steel |
| Outer Cylinder Surface Finish | None | None / Plated | None / Plated | None / Plated | None | None | Plated | None | None / Plated | None | None | None | None / Plated | None / Plated | None | None | None / Plated | None | None / Plated | None / Plated | None | Plated | None / Plated | None / Plated | None | None | Plated | None | Plated | None | None | None | None | None | - | None | None | None | None | None / Plated | Plated | - | None | - | Plated |
| For Shaft Diameter(mm) | 3 ～ 60 | 3 ～ 50 | 3 ～ 50 | 3 ～ 50 | 6 ～ 60 | 6 ～ 60 | 5 ～ 50 | 6 ～ 50 | 3 ～ 50 | 5 ～ 80 | 6 ～ 30 | 3 ～ 60 | 6 ～ 50 | 6 ～ 50 | - | 5 ～ 20 | 6 ～ 16 | 6 ～ 60 | 6 ～ 20 | 6 ～ 30 | 6 ～ 60 | 5 ～ 50 | 6 ～ 40 | 6 ～ 16 | 6 ～ 30 | 5 ～ 100 | 4 ～ 30 | 6 ～ 20 | 12 ～ 30 | 6 ～ 100 | 6 ～ 30 | 6 ～ 30 | 6 ～ 120 | - | - | 3 ～ 40 | 3 ～ 20 | 6 ～ 25 | 6 ～ 30 | 6 ～ 30 | 16 ～ 50 | - | 10 ～ 30 | - | 10 ～ 50 |
| For Shaft Size(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.25 in (1/4") ～ 1.50 in (1-1/2") | 0.25 in (1/4") ～ 4.00 in (4") | - | - | - | - | - | - | 0.19 in (3/16") ～ 2.00 in (2") | - | 0.25 in (1/4") ～ 2.00 in (2") | - |
| Overall Length L(mm) | 10 ～ 110 | 10 ～ 100 | 10 ～ 192 | 19 ～ 192 | 17 ～ 110 | 17 ～ 110 | 18 ～ 110 | 25 ～ 110 | 35 ～ 192 | 22 ～ 165 | 19 ～ 64 | 19 ～ 211 | 35 ～ 192 | 19 ～ 100 | - | - | 19 ～ 70 | 35 ～ 211 | 16 ～ 35 | 29 ～ 90 | 35 ～ 211 | 33 ～ 215 | 49 ～ 230 | 19 ～ 37 | 19 ～ 64 | 17 ～ 175 | 15 ～ 74 | - | 40 ～ 138 | 19 ～ 100 | 19 ～ 64 | 35 ～ 123 | 17 ～ 200 | - | - | 10 ～ 80 | 13 ～ 44 | 19 ～ 112 | 48 ～ 140 | 29 ～ 90 | 100 ～ 300 | - | 60 ～ 128 | - | 45 ～ 243 |
| Overall Length L(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 in (3/4") ～ 3.00 in (3") | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.75 in (3/4") ～ 3.00 in (3") | 0.75 in (3/4") ～ 8.00 in (8") | - | - | - | - | - | - | 0.56 in (9/16") ～ 4.00 in (4") | - | 1.19 in ～ 5.00 in (5") | - |
| Flange Type | - | Standard Flange | - | Standard Flange | Standard Flange | Standard Flange | - | - | Center Flanged | - | Standard Flange | - | Pilot Flanged | Pilot Flanged | Standard Flange | - | - | Standard Flange | - | Standard Flange | Standard Flange | - | Standard Flange / Pilot Flanged | Standard Flange | Standard Flange | - | - | Standard Flange | - | - | Pilot Flanged | Standard Flange | - | - | - | - | - | Pilot Flanged | - | Pilot Flanged | Pilot Flanged | - | Standard Flange | - | - |
| Lubrication Type | Standard | Standard / Grease coating | Standard / Grease coating | Standard / Grease coating | Standard | Standard | Standard / Grease coating | Standard | Standard / Grease coating | Standard | Standard | Standard | Standard / Grease coating | Standard / Grease coating | Standard | Standard | Standard / Grease coating | Standard | Standard / Grease coating | Standard / Grease coating | Standard | Standard / Grease coating | Standard / Grease coating | Standard / Grease coating | Standard / Grease coating | Standard | Standard / Grease coating | Standard | Standard / Grease coating | - | Standard / Grease coating | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Grease coating | Grease coating | Standard | Standard / Grease coating | Standard | With Lubrication Unit MX |
| Outer Diameter D(mm) | 7 ～ 90 | 7 ～ 80 | 7 ～ 80 | 7 ～ 80 | 12 ～ 90 | 12 ～ 90 | 10 ～ 80 | - | 12 ～ 80 | 12 ～ 120 | 12 ～ 45 | 7 ～ 90 | 12 ～ 80 | 12 ～ 80 | - | - | 10 ～ 26 | 12 ～ 90 | 12 ～ 32 | 12 ～ 45 | 12 ～ 90 | 10 ～ 80 | 15 ～ 65 | 10 ～ 26 | 12 ～ 45 | 12 ～ 150 | 8 ～ 45 | - | 21 ～ 45 | 12 ～ 130 | 12 ～ 45 | 12 ～ 45 | 12 ～ 180 | - | - | 7 ～ 60 | - | 12 ～ 40 | - | 12 ～ 45 | 32 ～ 75 | - | 19 ～ 45 | - | 19 ～ 80 |
| Outer Diameter D(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 in (1/2") ～ 2.375 in (2-3/8") | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.50 in (1/2") ～ 2.375 in (2-3/8") | 0.50 in (1/2") ～ 6.00 in (6") | - | - | - | - | - | - | 0.375 in (3/8") ～ 3.00 in (3") | - | - | - |
| Type | Standard / Open / Clearance Adjustment Type | with End Flange | Standard | with End Flange | with End Flange | with End Flange | Pillow Blocks Wide Block Type | Pillow Blocks Wide Block Type | with Center Flange | Standard / Open / Clearance Adjustment Type | with End Flange | Standard | with Pilot, End Flange | with Pilot, End Flange | - | - | Standard | with End Flange | Standard | with End Flange | with End Flange | Pillow Blocks Wide Block Type | with End Flange / with Pilot, End Flange | with End Flange | Mini-Flanged | - | Housing Type | - | Shaft-Sliding Linear Bushing Pillow Blocks | Standard | with Pilot, End Flange | with End Flange | Standard / Open / Clearance Adjustment Type | - | - | Standard / Open / Clearance Adjustment Type | Housing Type | with Pilot, End Flange | Pillow Blocks Wide Block Type | with Pilot, End Flange | with Pilot, End Flange | - | with End Flange | - | Pillow Blocks Wide Block Type |
| Length | Standard | Standard | Standard / Double | Double | Standard | Standard | Standard / Medium | Standard | Double | Standard | Standard | Long | Double | Standard | - | Standard / Double | Standard / Double | Long | Short | Double | Long | Double / Medium Long / Long | - | Standard | Standard | Standard | Standard | Standard / Double | Standard / Double | - | Standard | Long | Standard | - | Standard | Standard | Standard | Short / Long | Long | - | Long | Standard | Double | Standard | Standard / Double |
| Ball Recirculating Type | Single | Single | Single / Double | Double | Single | Single | Single / Double | Single | Double | Single | Single | Double | Double | Single | Single | - | Single / Double | Double | Single | Double | Double | Double | Double | Single | Single | Single | Single | - | Single / Double | - | Single | Double | Single | Single | - | Single | Single | Single / Double | Double | Double | Double | - | Double | - | Single / Double |
| Precision | High Grade / Precision Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | - | High Grade | - | High Grade | High Grade | High Grade / Precision Grade | High Grade | - | High Grade / Precision Grade | High Grade | - | High Grade | High Grade | Standard Grade | - | High Grade | - | High Grade |
| Eccentricity(µm) | 4 ～ 25 | 8 ～ 20 | 8 ～ 25 | 10 ～ 25 | 12 ～ 25 | 12 ～ 25 | - | - | 15 ～ 25 | 12 ～ 20 | 12 ～ 15 | 10 ～ 25 | 15 ～ 25 | 12 ～ 20 | 12.7(0.5 µin) ～ 20.32(0.8 µin) | - | 12 ～ 15 | 15 ～ 25 | 12 ～ 15 | 15 ～ 20 | 15 ～ 25 | - | 20 ～ 30 | 12 | 12 ～ 15 | 12 ～ 30 | - | - | - | - | 12 ～ 15 | 15 ～ 20 | 8 ～ 30 | 12.7(0.5 µin) ～ 20.32(0.8 µin) | - | 8 ～ 20 | - | 12 ～ 20 | - | 15 ～ 20 | - | - | 15 ～ 20 | - | - |
Loading...
Configure
Filters
-
Motion
-
Style
-
Standard -
-
-
Outer Cylinder Material
-
Outer Cylinder Surface Finish
-
Metric / Inch
-
For Shaft Diameter(mm)
- 3
- 4
- 5
- 6
- 6.350 (1/4")
- 8
- 10
- 12
- 13
- 14
- 16
- 19.050 (3/4")
- 20
- 25
- 25.400 (1")
- 30
- 35
- 38
- 40
- 45
- 50
- 55
- 60
- 70
- 80
- 90
- 100
- 120
-
For Shaft Size(in)
-
Overall Length L(mm)
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 19
- 19.050 (3/4")
- 20
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 41.275 (1-5/8")
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 57.150 (2-1/4")
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 64.5
- 65
- 66
- 67
- 67.3
- 67.5
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 88
- 90
- 91
- 92
- 93
- 94
- 96
- 97
- 98
- 99
- 100
- 102
- 102.3
- 102.5
- 103
- 104
- 105
- 106
- 108
- 109
- 110
- 111
- 112
- 114
- 115
- 117
- 118
- 120
- 121
- 122
- 123
- 124
- 125
- 128
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 138
- 140
- 141
- 142
- 143
- 144
- 145
- 148
- 150
- 151
- 152
- 153
- 154
- 155
- 155.5
- 156
- 157
- 158
- 160
- 164
- 165
- 167
- 170
- 175
- 176
- 177
- 178
- 180
- 182
- 184
- 185
- 187
- 190
- 192
- 196
- 199
- 200
- 202
- 209
- 211
- 215
- 220
- 224
- 230
- 240
- 243
- 244
- 250
- 300
- 310
-
Overall Length L(in)
- 0.56 in (9/16")
- 0.75 in (3/4")
- 0.875 in (7/8")
- 1.19 in
- 1.25 in (1-1/4")
- 1.31 in (1-5/16")
- 1.375 in (1-3/8")
- 1.50 (1-1/2")
- 1.50 in (1-1/2")
- 1.594 in (1-19/32")
- 1.625 in (1-5/8")
- 1.69 in
- 1.75 in (1-3/4")
- 1.875 in (1-7/8")
- 1.94 in
- 2.06 in
- 2.25 in (2-1/4")
- 2.375 in (2-3/8")
- 2.50 in (2-1/2")
- 2.625 in (2-5/8")
- 2.75 in (2-3/4")
- 2.81 in
- 2.813 in (2-13/16")
- 2.88 in
- 3.00 in (3")
- 3.094 in (3-3/32")
- 3.20 in
- 3.38 in
- 3.50 in (3-1/2")
- 3.63 in (3-5/8")
- 3.75 in (3-3/4")
- 3.95 in
- 4.00 in (4")
- 4.281 in (4-9/32")
- 4.50 in (4-1/2")
- 4.75 in (4-3/4")
- 5.00 in (5")
- 5.33 in
- 5.688 in (5-11/16")
- 6.00 in (6")
- 6.70 in
- 7.50 in (7-1/2")
- 8.00 in (8")
- 9.00 in (9")
-
Flange Type
-
Lubrication Type
- Standard
- Grease coating
- With Lubrication Unit MX
-
Outer Diameter D(mm)
-
Outer Diameter D(in)
-
Type
-
Length
-
Ball Recirculating Type
-
Precision
-
Eccentricity(µm)
Brand
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same Day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Related Categories to Linear Ball Bearings
-
- Linear Shafts
- Linear Ball Bearings
- Plain Bushings & Thrust Washers
- Linear Guides
- Linear Actuators
- Ball Screws
- Ball Screw Support Units
- Lead Screws & Slide Screws
- Shaft Supports
- Shaft Collars
- Linear Slide Assemblies
- Cross Rollers
- Ball Guides
- Spline Shafts
- Cable & Hose Carrier Systems
- Thrust Plates & Gibs
- Other Linear Motion Components
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy