Rolled Ball Screws - Thread Diameter 20, Lead 5, 10 or 20, Precision Grade C7 or C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 5 Days |
---|
Rolled Ball Screw (Shaft Only) TS
THK
[Features]
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
Configure Now
Ships as soon as | 2 Days |
---|
Precision Ball Screws - Thread Diameter 15, Lead 5, 10, 20 or 40, Precision Grade C3, C5 or C7
MISUMI
Smallest Nut Outer Diameter
Configure Now
Ships as soon as | 5 Days |
---|
Standard Ball Screw Compact FA Series For General use PSS Type
NSK
• Product Category: Precision Ball Screws
• Grade Accuracy: C5
• Nut Type: Standard
• Nut Structure: Single
• Flange Shape: Compact Flange
Configure Now
Ships as soon as | 6 Days |
---|
Rolled Ball Screw, No Preloading Type (Nut Only) BTK
THK
• Product Category: Rolled Ball Screws
• Preload: No Preload
• Cost Efficient: Standard
• Type: Nut Only
• Nut Type: Standard
Configure Now
Ships as soon as | 4 Days |
---|
Rolled Ball Screw, No Preloading Type (Nut Only) BLK
THK
[Features]
· Uses an end cap method for high speed rotation, providing stable operation.
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screws - Shaft Diameter 6 or 8, Lead 1 or 2
MISUMI
Smallest Nut Outer Diameter
Configure Now
Ships as soon as | 13 Days |
---|
Rolled Ball Screws - Block Nut/Thread Diameter 15, 20 or 25, Lead 5 or 10, Precision Grade C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 13 Days |
---|
Rolled Ball Screw, No Preloading Type (Nut Only) BNT
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screw, No Machining on Shaft Ends, MDK Shape
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
Configure Now
Ships as soon as | 17 Days |
---|
Ball Screw Assemblies - Flanged single nut FEM-E-B
Bosch Rexroth
• With seals
• Preload class: C1
• Tolerance grade: T5
• Preserved and basically greased
• Paired with MGD Nut Housing
Configure Now
Ships as soon as | 22 Days |
---|
Unfinished Shaft Ends, With Preload, Model BIF
THK
• Product Category: Precision Ball Screws
• Axial Clearance: 0
• Preload: Preloaded
• Cost Efficient: Standard
• Type: Assembly
Configure Now
Ships as soon as | 17 Days |
---|
Rolled Ball Screws - Shaft Ends Configurable, Standard Nuts
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 7 Days |
---|
Rolled Ball Screws - Thread Diameter 12 or 14, Lead 4, 5 or 10, Precision Grade C7 or C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 13 Days |
---|
Ball Screw Nut Brackets - Block Style, Standard
MISUMI
Various sizes are available for the nut sizes of MISUMI Ball Screws.
Configure Now
Ships as soon as | 5 Days |
---|
Precision Ball Screws - Thread Diameter 20, Lead 5, 10, 20 or 40, Precision Grade C5 or C7
MISUMI
Smallest Nut Outer Diameter
Configure Now
Ships as soon as | 5 Days |
---|
Precision Ball Screws - Thread Diameter 12, Lead 2, 4, 5 or 10, Precision Grade C3, C5 or C7
MISUMI
Smallest Nut Outer Diameter
Configure Now
Ships as soon as | 5 Days |
---|
Ball Screw Assemblies - Flanged single nut FEM-E-S
Bosch Rexroth
• With seals
• Preload class: C1
• Tolerance grade: T5
• Preserved and basically greased
• Paired with MGS Nut Housing
Configure Now
Ships as soon as | 22 Days |
---|
Precision Ball Screws - Thread Diameter 25, Lead 5, 10 or 20, Precision Grade C5 or C7
MISUMI
Smallest Nut Outer Diameter
Configure Now
Ships as soon as | 5 Days |
---|
Rolled Ball Screws - Thread Diameter 28 or 32, Lead 6, 10 or 32, Precision Grade C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 13 Days |
---|
Rolled Ball Screws - Thread Diameter 15, Lead 5, 10 or 20, Precision Grade C7 or C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 13 Days |
---|
C-Value Rolled Ball Screws Standard Nut - Shaft Diameter 15, Lead 5, 10, 16, 20
MISUMI
Configure Now
Ships as soon as | 10 Days |
---|
MISUMI
• Product Category: Ball Screw Accessories
• Cost Efficient: Standard
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 15, Lead 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
Configure Now
Ships as soon as | 4 Days |
---|
Rolled Ball Screws - Shaft Diameter 10, Lead 2, 4, Economy Model, DIN69051 Compliant
MISUMI
• Product Category: Rolled Ball Screws
• Screw Shaft O.D. d Dimension (f): 10
• Grade Accuracy: C10
• Axial Clearance: 0.05 or Less
• Preload: No Preload
Configure Now
Ships as soon as | 20 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 25, Lead 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401, 0501, or 0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 8, Lead 1
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
[Dust-proofing and lubrication.]
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
Configure Now
Ships as soon as | 4 Days |
---|
Rolled Ball Screws - Thread Diameter 25, Lead 5, 10 or 25, Precision Grade C7 or C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 13 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 20, Lead 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
Configure Now
Ships as soon as | 4 Days |
---|
Stock Items Included
Single Ball Nut - DIN Style B-Flange, FEM-E-B Series
Bosch Rexroth
• With seals
• Adjustable preload
• Tolerance grade: T3 (for sizes as per the product overview for screws, see General Technical Notes and Information "Product description"), T5, T7
• Paired with MGD Nut Housing
Configure Now
Ships as soon as | 4 Days |
---|
Rolled Ball Screws - Thread Diameter 8, Lead 2 or 4, Precision Grade C7 or C10
MISUMI
Rolled Ball Screws suitable for transfer application
Configure Now
Ships as soon as | 13 Days |
---|
Unfinished Shaft Ends, No Preload, Precision Model BNF
THK
[Features]
· This product has no machining on the shaft ends, and is a standard series precision ball screw mass-produced at specified lengths.
· Additional work on screw shaft ends can be easily performed.
· Also, a variety of nut shapes are available to suit different purposes such as the BNFN shape double nut, BNF shape single nut, BIF shape offset preload nut, MDK shape miniature ball screw, and MBF shape.
· Dust-proof: The following model number nuts have labyrinth seals mounted.
Configure Now
Ships as soon as | 17 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 10, Lead 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
Configure Now
Ships as soon as | 4 Days |
---|
Nut Housing - Supports FEM-E-B Nut, MGD Series
Bosch Rexroth
• Connection dimensions similar to DIN 69051, Part 5 flange type B.
• With seals
• Preload class: C0, C00, C1, C2, C3
• Tolerance grade: T3 (for sizes as per the product overview for screws, see general technical notes and information, “Product description”), T5, T7, T9
• Paired with Assembly FEM-E-B or Single Nut FEM-E-B
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screws - Thread Diameter 10, Lead 2 ,4 or 10, Precision Grade C3, C5 or C7
MISUMI
Smallest Nut Outer Diameter
Configure Now
Ships as soon as | 13 Days |
---|
Rolled Ball Screw, No Preloading Type (Nut Only) WTF
THK
[Features]
· THK rolling ball screws are low-priced sending screws that modify the screw grinding shaft used in precision ball screws and use a new screw shaft created by combining high accuracy rolling pressing with special surface grinding finishing.
· Because all the ball rolling surfaces or the combined ball screw nuts have undergone grinding finishing, the gap in the shaft direction is smaller than conventional rolling ball screws, providing smooth operation.
· Also, an abundant standardized lineup is available so you can select the product that's optimal for your application.
· Aside from the C10 class, the shaft tips for the C7 and C8 classes are both standardized for movement amount tolerance, so they can be used for a wide variety of applications.
· After rolling is completed, the ball rolling surface of the screw shaft undergoes a special surface polishing process, finishing the surface at a roughness of 0.20a or less, identical to the precision ball screw product line after screw grinding.
· Rotating ball screw nuts also undergo a ball rolling surface grinding and finishing process just like precision ball screws, which provides durability and smooth operation.
· After rolling is completed, the screw shaft is treated with either high frequency or charcoal immersion quenching, followed by a special surface grinding and finishing process. Due to the manufacturing methods used, this product is comparatively cheaper than the precision ball screw line made through grinding.
· Because the ball screw nut has either a compact labyrinth seal or a brush seal built-in, it operates with low friction and high level dust-proofing, lengthening the life of ball screws.
Configure Now
Ships as soon as | 17 Days |
---|
Single Ball Nut - Round Flange, FEM-E-S Series
Bosch Rexroth
• With seals
• Adjustable preload
• Tolerance grade: T3 (for sizes as per the product overview for screws, see General Technical Notes and Information "Product description"), T5, T7
• Paired with MGS Nut Housing
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 14, Lead 4
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 16, Lead 16
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
· BNK A ball screw with shape standardization to screw shaft diameter ø4 - 25 mm and lead 1 - 20 mm.
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 8, Lead 10
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· This rotary ball screw is a rotary ball screw unit with a unified structure made up of a ball screw nut and a support bearing.
· The support bearing is a large angular bearing with a contact angle of 60° that provides rigidity in the axial direction where more balls are placed.
· The BLR type is available in precision ball screw and rolled ball screw specifications.
· Smooth operation: provides smooth operation in comparison to the straight line movement of rack and pinion systems.
· Also, because the screw shaft does not rotate with ball screw nut drive, there is no jumping rope phenomenon, operation is quiet, and heat produced by the unit is reduced.
Configure Now
Ships as soon as | Same Day |
---|
Stock Items Included
Ball Screw Assemblies - Adjustable-preload single nut SEM-E-S
Bosch Rexroth
• With seals
• Adjustable preload
• Tolerance grade: T5
• Preserved and basically greased
• Paired with MGS Nut Housing
Configure Now
Ships as soon as | 22 Days |
---|
Precision Ball Screws, Shaft Diameter 12, Lead 2, Economy Model, DIN69051 Compliant
MISUMI
• Product Category: Precision Ball Screws
• Screw Shaft O.D. d Dimension (f): 12
• Basic Load Rating, Dynamic Rating (n): 1700
• Basic Load Rating, Static Rating (n): 2900
• Grade Accuracy: C5
Configure Now
Ships as soon as | 20 Days |
---|
Configure Now
Ships as soon as | 20 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 14, Lead 2
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
· An appropriate amount of grease is enclosed with ball screw nuts.
· Also, for ball screw nuts larger than the BNK0802 shape model, a labyrinth seal is built-in (BNK1510 shape, BNK1520 shape, BNK1616 shape, BNK2020 shape, and BNK2520 shape use a combination end cap).
· In addition, for cases where contaminants are a concern, dust-proof equipment (bellows, etc.) must always be used to completely cover screw shafts.
Configure Now
Ships as soon as | 4 Days |
---|
Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 15, Lead 20
THK
Because the shaft tips are complete, no drawing and machinery are necessary and the product can be used as is.
[Features]
· The machined screw shaft tip product is standardized ball screw unit with a space saving screw shaft and ball screw nut.
· The screw shaft is standardized with a support unit for the screw tip terminal. When using a BNK0401/0501/0601 mount shape, screws not set as fixed - free are considered fixed - support, and form a direct structure with the motor.
· The screw shaft and ball screw nut shape feature a compact design. In addition, these parts can be assembled in the same shape when used with a support unit or nut bracket, creating a simple and high accuracy feed mechanism.
Configure Now
Ships as soon as | 4 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Cost Efficient |
Product Category |
Flange Shape |
Grade Accuracy |
Screw Shaft O.D. d(φ) |
Lead(mm) |
Shaft End Type |
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
Brand | MISUMI | THK | MISUMI | NSK | THK | THK | MISUMI | MISUMI | THK | THK | Bosch Rexroth | THK | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Bosch Rexroth | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | MISUMI | THK | THK | MISUMI | THK | Bosch Rexroth | MISUMI | THK | THK | Bosch Rexroth | MISUMI | THK | Bosch Rexroth | THK | THK | THK | Bosch Rexroth | MISUMI | MISUMI | THK | THK |
Product Series | Rolled Ball Screws - Thread Diameter 20, Lead 5, 10 or 20, Precision Grade C7 or C10 | Precision Ball Screws - Thread Diameter 15, Lead 5, 10, 20 or 40, Precision Grade C3, C5 or C7 | Standard Ball Screw Compact FA Series For General use PSS Type | Rolled Ball Screws - Block Nut/Thread Diameter 15, 20 or 25, Lead 5 or 10, Precision Grade C10 | Rolled Ball Screws - Thread Diameter 12 or 14, Lead 4, 5 or 10, Precision Grade C7 or C10 | Precision Ball Screws - Thread Diameter 20, Lead 5, 10, 20 or 40, Precision Grade C5 or C7 | Precision Ball Screws - Thread Diameter 12, Lead 2, 4, 5 or 10, Precision Grade C3, C5 or C7 | Precision Ball Screws - Thread Diameter 25, Lead 5, 10 or 20, Precision Grade C5 or C7 | Rolled Ball Screws - Thread Diameter 28 or 32, Lead 6, 10 or 32, Precision Grade C10 | Rolled Ball Screws - Thread Diameter 15, Lead 5, 10 or 20, Precision Grade C7 or C10 | C-Value Rolled Ball Screws Standard Nut - Shaft Diameter 15, Lead 5, 10, 16, 20 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 15, Lead 10 | Rolled Ball Screws - Shaft Diameter 10, Lead 2, 4, Economy Model, DIN69051 Compliant | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 25, Lead 20 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 8, Lead 1 | Rolled Ball Screws - Thread Diameter 25, Lead 5, 10 or 25, Precision Grade C7 or C10 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 20, Lead 10 | Rolled Ball Screws - Thread Diameter 8, Lead 2 or 4, Precision Grade C7 or C10 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 10, Lead 2 | Precision Ball Screws - Thread Diameter 10, Lead 2 ,4 or 10, Precision Grade C3, C5 or C7 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 14, Lead 4 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 16, Lead 16 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 8, Lead 10 | Ball Screw Assemblies - Adjustable-preload single nut SEM-E-S | Precision Ball Screws, Shaft Diameter 12, Lead 2, Economy Model, DIN69051 Compliant | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 14, Lead 2 | Precision Ball Screw, Shaft Tip Complete Product - BNK Shape, Shaft Diameter 15, Lead 20 | ||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Days to Ship | 5 Days | 2 Days | 5 Days | 6 Days | 4 Days | 4 Days | 13 Days | 13 Days | 4 Days | 17 Days | 22 Days | 17 Days | 7 Days | 13 Days | 5 Days | 5 Days | 5 Days | 22 Days | 5 Days | 13 Days | 13 Days | 10 Days |
Same Day Stock Items Included | 4 Days | 20 Days |
Same Day Stock Items Included | 4 Days | 13 Days |
4 Days Stock Items Included | 4 Days | 13 Days | 17 Days | 4 Days | 4 Days | 13 Days | 17 Days | 4 Days | 4 Days | 4 Days |
Same Day Stock Items Included | 22 Days | 20 Days | 20 Days | 4 Days | 4 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
Type | - | Shaft Only | - | - | Nut Only | Nut Only | - | - | - | Assembly | Assembly | Assembly | - | Assembly | - | - | - | Assembly | - | - | - | - | - | Assembly | - | Assembly | Assembly | - | Assembly | Nut Only | - | Assembly | Assembly | - | - | Nut Only | Nut Only | Assembly | Assembly | Assembly | Assembly | - | - | Assembly | Assembly |
Cost Efficient | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Cost Efficient | Standard | Standard | Cost Efficient | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Cost Efficient | Cost Efficient | Standard | Standard |
Product Category | Rolled Ball Screws | Rolled Ball Screws | Precision Ball Screws | Precision Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Precision Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Precision Ball Screws | Rolled Ball Screws | Precision Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Ball Screw Accessories | Precision Ball Screws | Precision Ball Screws | Rolled Ball Screws | Precision Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Ball Screw Accessories | Precision Ball Screws | Rolled Ball Screws | Precision Ball Screws | Precision Ball Screws | Rolled Ball Screws | Precision Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Precision Ball Screws | Precision Ball Screws | Ball Screw Accessories | Precision Ball Screws | Rolled Ball Screws | Rolled Ball Screws | Precision Ball Screws | Precision Ball Screws | Precision Ball Screws | Rolled Ball Screws | Precision Ball Screws | Precision Ball Screws | Precision Ball Screws | Precision Ball Screws |
Flange Shape | Compact Flange | - | Square Flange | Compact Flange | Compact Flange | Compact Flange | Square Flange / Compact Flange | Block | Block | Miniature | Compact Flange | Round Flange | Compact Flange | Compact Flange | - | Square Flange | Square Flange | Round Flange | Square Flange | Compact Flange | Compact Flange | Compact Flange | - | Square Flange | Compact Flange | Square Flange | Compact Flange | Compact Flange | Square Flange | Compact Flange | Compact Flange | Round Flange | Compact Flange | Block | Square Flange | Compact Flange | Round Flange | Compact Flange | Square Flange | Compact Flange | Round Flange | Compact Flange | Compact Flange | Compact Flange | Square Flange |
Grade Accuracy | C7 / C10 | C10 | C3 / C5 / C7 | C5 | - | - | C3 / C5 / C7 | C10 | - | C3 / C5 / C7 | - | C5 | C10 | C7 / C10 | - | C5 / C7 | C3 / C5 / C7 | - | C5 / C7 | C10 | C7 / C10 | C7 / C10 | - | C5 / C7 | C10 | C5 / C7 | C3 / C5 / C7 | C7 / C10 | C5 / C7 | - | C7 / C10 | C5 | C3 / C5 / C7 | - | C3 / C5 / C7 | - | - | C3 / C5 / C7 | C5 / C7 | C5 / C7 | - | C5 | C5 | C3 / C5 / C7 | C5 / C7 |
Screw Shaft O.D. d(φ) | 20 | 4 ~ 50 | 15 | 6 ~ 25 | 10 ~ 50 | 15 ~ 50 | 6 ~ 8 | 15 ~ 25 | 14 ~ 45 | 4 ~ 14 | 12 ~ 63 | 16 ~ 50 | 8 ~ 32 | 12 ~ 14 | - | 20 | 12 | 12 ~ 63 | 25 | 28 ~ 32 | 15 | 15 | - | 15 | 10 | 25 | 8 | 25 | 20 | 12 ~ 63 | 8 | 16 ~ 50 | 10 | 16 ~ 80 | 10 | 15 ~ 50 | 12 ~ 63 | 14 | 16 | 8 | 12 ~ 63 | 12 | 25 | 14 | 15 |
Lead(mm) | 5 ~ 20 | 4 ~ 60 | 5 ~ 20 | 5 ~ 60 | 4 ~ 16 | 10 ~ 50 | 1 ~ 2 | 5 ~ 10 | 4 ~ 12 | 1 ~ 5 | 5 ~ 40 | 5 ~ 12 | 2 ~ 32 | 4 ~ 10 | - | 5 ~ 20 | 2 ~ 10 | 5 ~ 40 | 5 ~ 20 | 6 ~ 32 | 5 ~ 20 | 5 ~ 16 | - | 10 | 2 ~ 4 | 20 | 1 | 5 ~ 25 | 10 | 5 ~ 40 | 2 ~ 4 | 5 ~ 12 | 2 | - | 2 ~ 10 | 20 ~ 100 | 5 ~ 40 | 4 | 16 | 10 | 5 ~ 40 | 2 | 5 ~ 25 | 2 | 20 |
Shaft End Type | Standard Shaft End Alterations Item | No Shaft End Alterations | Standard Shaft End Alterations Item | - | - | - | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | - | No Shaft End Alterations | Standard Shaft End Alterations Item | No Shaft End Alterations | Freely Selectable Shaft End Shape Item | Standard Shaft End Alterations Item | - | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | - | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | - | Standard Shaft End Alterations Item | No Shaft End Alterations | Standard Shaft End Alterations Item | - | Standard Shaft End Alterations Item | - | - | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item | Standard Shaft End Alterations Item |
Loading...
Standard Shaft End Alterations Items are available for quick delivery.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy