Empowering Engineers with

Configurable Components

Our business hours are 7:00 am ~ 9:00 pm ET (Monday to Friday).

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

Mirror Holders

Days to Ship
  • ALL
  • 4 Days or Less
  • 6 Days or Less
  • 7 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • Gimbaled Mirror Holder

    Gimbaled Mirror Holder

    SURUGA SEIKI

    This is a holder where mirrors, plate beam splitter and such elements are fixed, and can adjust the tilting of two axis. The center when rotating with a fine movement and the center of the mirror is always the same. [Features] ■ F50, F55 · This is a holder where mirrors, plate beam splitter, lens and such elements are fixed, and can finely adjust the tilting (θy, θz). · If both θy, θz clamp can be tightened, fine movement of ±4°-6° is possible, and if the clamp is loosened, a rough movement of 360° is possible. · Because it is a gimbal mechanism, the center of rotation for fine movement and rough movement is always the same as the center of the mirror. · Standard rod that is attached is φ20, L=60mm, but the rod length can be changed. Screw holes of the holder is M6P=1, and rods of A40 to A42 can be used. · Mirror Holder F50: Feed method is the A type micro meter head and the E type screw type. · Horizontal operation type mirror holder F55: Own horizontal operation (the operation system is mounted in the horizontal direction) so can be operated without putting a hand to the optical axis, and close specification is possible. ■ F52 · This is a holder where mirrors, plate beam splitter, lens and such elements are fixed, and can finely adjust the tilting (θy, θz) of the two axis. · 2 axis tilt (θy, θz). Fine adjustment of ±2° or ±3° (F52) is possible. · Because it is a gimbal mechanism, the center of rotation for fine movement and rough movement is always the same as the center of the mirror. · Removing the element such as mirror and such are with the screw ring system, and has a resin ring for protection attached.

    CAD
    2D3D
    Days to Ship
    8 Days or more
  • Compact Mirror Holder (Optical Axis 25 mm Type)

    Compact Mirror Holder (Optical Axis 25 mm Type)

    SURUGA SEIKI

    It is the mirror holder of the optical axis height 25 mm for opt Station. You can select the mounting method so that the distortion of the element does not occur due to the mounting. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

    CAD
    2D3D
    Days to Ship
    4 Days or more
  • Precision Mirror Holder (Gimbal Type)

    Precision Mirror Holder (Gimbal Type)

    SURUGA SEIKI

    Center of tilt axis matching with the mirror surface. Able to change to free right-left, and vertical 45° incident type by switching a plate. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Half-inch Mirror Holder

    Half-inch Mirror Holder

    SURUGA SEIKI

    The mirror holder is dedicated to mirror with a diameter of 12.7 mm. Two types of operation screws: the knurled knob, which can be operated by hand, and the set bolt type for embedded equipment, which can prevent mis-operation, are available. [Features] · Newly designed on concept of compact and high performance. · Although the machine body is compact enough to fit in a 1 inch cubic meter of space, the holder reduces the meandering width and the hysteresis width of two axes - θy and θz - to several order of microrads, and delivers the top level of stability for 60 hours after being located (at normal temperature). · The holder can be mounted with an M4 screw that has a step to prevent the holder from rotating. · The mounting plate type that can be installed at positions of 0° and 45° are also available. · When the plate is used, the rod axis flushes with the mirror reflecting surface.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Beam steering holder

    Beam steering holder

    SURUGA SEIKI

    [Features] · Types with only the upper mirror movable and with both upper and lower mirrors movable are available. · The available adjustment screw pitches are 0.5mm and 0.25mm. · The mirror is fixed by adhesion or by three-point support. · The lower side of the ball is M16P=1mm male screw. · This can be fixed to a magnet base, plate, etc.

    CAD
    2D3D
    Days to Ship
    6 Days or more
  • Mirror Holder

    Mirror Holder

    SURUGA SEIKI

    This is an inexpensive mirror holder for fixing an element such as a mirror or a plate beam splitter. It can make fine adjustments in the 2 axis orientation. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Tremor Small Miller Holders

    Tremor Small Miller Holders

    SURUGA SEIKI

    Holder that can hold small mirrors in dimension up to Φ 30 mm and adjust 2-axis tilts. [Features] · Fine resolution is twice better than that of F58N, 0.7°/rotation. · The mirror fixing methods are "adhesion type" and "three-point support type". · There are types with a rod and no rod both for adhesion and screws. · The type without rod is fixed with M3 screw or M6 screw. · For the three-point support type, Φ20 to Φ30mm mirrors can be fixed by replacing two pins.

    CAD
    2D3D
    Days to Ship
    Quote
  • Mirror Holder (Strip Clamp)

    Mirror Holder (Strip Clamp)

    SURUGA SEIKI

    It is a mirror holder that adopts slit clamp (slit fastening) system. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Small Upward Operation Mirror Holder

    Small Upward Operation Mirror Holder

    SURUGA SEIKI

    Upward operation mirror holder with excellent safety and operability. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

    CAD
    2D3D
    Days to Ship
    8 Days or more
  • Compact Mirror Holder (with lock)

    Compact Mirror Holder (with lock)

    SURUGA SEIKI

    [Features] · The holder fixes a compact mirror up to φ 30 mm and enables fine tuning of the tilt in the directions of two axes (θy, θz). · The mirror fixing methods are "adhesion type" and "three-point support type". · The type without rod is fixed with M3 screw or M6 screw. · The three-point support type (F58N-30-2) can fix a mirror up to mirror with a diameter of 20–30 mm by changing the position of the lower supporting pin. · The tilt adjusting knob can be turned with 0.5 mm increments (P = 0.5 mm), and fixed with the locknut.

    CAD
    2D3D
    Days to Ship
    Quote
  • Small upward operation mirror holder

    Small upward operation mirror holder

    SURUGA SEIKI

    [Features] · Compact type upward operation mirror holder with excellent safety and operability. · Can fix a small mirror up to φ 30 and two-shaft tilt fine adjustment. · Can lock a tilt shaft with a lock nut. · There are two mirror fixing methods: adhesion and three-point support. · There are types with a rod and no rod. · For the three-point support type, φ 20 to φ 30 mirrors can be fixed by replacing two pins.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Fine movement small mirror holder (with lock)

    Fine movement small mirror holder (with lock)

    SURUGA SEIKI

    [Features] · FM58 with a tilt lock nut. · The mirror fixing methods are "adhesion type" and "three-point support type". · There are models that include a rod and ones that do not both for adhesion and screws. · The type without rod is fixed with M3 screw or M6 screw. · For the three-point support type, Φ20 to Φ30mm mirrors can be fixed by replacing two pins.

    CAD
    2D3D
    Days to Ship
    Quote
  • Rectangular Mirror Holder

    Rectangular Mirror Holder

    SURUGA SEIKI

    [Features] · Holder for fastening square mirror, filter, projection plate and other similar products. · Fastening done with two screws. · Holder only for fastening. · Two types of holders with 60 mm and 100 mm width.

    CAD
    2D3D
    Days to Ship
    4 Days or more
  • High Stability Mirror Holder

    High Stability Mirror Holder

    SURUGA SEIKI

    This product is ideal for locations requiring the stability and operability, and locations in which high precision or alignment processes are required. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

    CAD
    2D3D
    Days to Ship
    8 Days
  • High-Performance Mirror Holder (Optical Axis: 25 mm Type)

    High-Performance Mirror Holder (Optical Axis: 25 mm Type)

    SURUGA SEIKI

    [Features] · Small specification of FM532. · Optical axis height of 25 mm is designed for optical stations. · This product is ideal for locations that require stability and operability, and locations in which high precision or alignment processes are required.

    CAD
    2D3D
    Days to Ship
    4 Days or more

Configure

Clear All
  • Metric / Inch

    • metric

Narrow search by specifying Manufacturer

Brand

MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close