Empowering Engineers with

Configurable Components

Our business hours: Mon. - Fri. 7 a.m. - 9 p.m. ET | Sat. 8 a.m - 5 p.m. ET.

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

Filter Holders

Days to Ship
  • ALL
  • 8 Days or Less
  • Flat spring type filter holder

    Flat spring type filter holder

    SURUGA SEIKI

    [Features] · Holder to fix a square or round filter. · Up to four filters of external diameter of φ 50 mm square can be set. · Push in the filter from above and then it is pushed against the reference surface by the flat spring and fixed. · Thanks to it, even if the filter is attached and detached, the inclination of the filter against the optical axis is kept constant at any times, so the optical axis will not be misaligned significantly. · In addition, filters will not contact each other. · The filter contact part of the flat spring is made of resin.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Variable NDX ND Filter Holder

    Variable NDX ND Filter Holder

    SURUGA SEIKI

    [Features] · Holder to which six ND filters (φ 15 mm) with different transmittances are attached enables you to select any transmittance by rotating it. · The filter is fixed with two screws. · No ND filter is set. · The rod type (F71N-1) and the plate type (F71N-2) are available. · For the plate type, the height of the optical axis is set to 25 mm so that it can hold OPS filters.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Filer Holder

    Filer Holder

    SURUGA SEIKI

    [Features] · Holder to set a round or square filter. · Up to four filters of external diameter of φ 50 mm square can be set. · The filter shall be inserted from above, but it is not fixed so it may incline due to thickness.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Filer Holder

    Filer Holder

    SURUGA SEIKI

    [Features] · Holder to set a φ 15 mm or φ 20 mm filter · Maintains the optical axis height at 25 mm from the floor. · Can set two filters. · By loosening the clamp, you can slide the wheel back and forth and fix it in accordance with the thickness of the filter. · The compatible thickness of the filter is up to 4 mm. · The lower plate has a M4 tap hole and the rod type can be changed by attaching a rod. · F561-20 can be used as a simple change element holder by directly turning the element.

    CAD
    2D3D
    Days to Ship
    8 Days

Configure

Clear All
  • Metric / Inch

    • metric

Narrow search by specifying Manufacturer

Brand

MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close