Empowering Engineers with

Configurable Components

Our business hours are 7:00 am ~ 9:00 pm ET (Monday to Friday).

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

Pin Holes, Diaphragms

Days to Ship
  • ALL
  • 8 Days or Less
  • Variable Pin Hole Holders

    Variable Pin Hole Holders

    SURUGA SEIKI

    Small diameter holes of 8 size are cut at 45° intervals in the rotating disk. The positioning of each hole is done by click stop method.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Special Filters

    Special Filters

    SURUGA SEIKI

    The noise and distortion of the laser optical wavefront is removed by using a pinhole, making a clean spherical wave. The objective lens and pinhole can be easily detached from the outer structure. [Features] - The special filters, the noise and distortion of the laser optical wavefront is removed by using the pinhole, and can make a clean spherical wave. - With the micrometer head, the pinhole position and the 3 axes of the objective lens focusing can be finely adjusted. - Interval of the objective lens and the pinhole can be adjusted (± 6.5 mm) by the stage. - The fine adjustment of the pinhole can be done with the YZ axis which uses a cross roller bearing guide system. - The objective lens and pinholes can be easily detached from the outside respectively, so they can be easily replaced.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Pinhole Holder

    Pinhole Holder

    SURUGA SEIKI

    [Features] - The pin hole can be fixed which allows fine movement in YZ-axes possible. - Pinhole with outer shape of ø 16 mm can be used. - Use the M20P=0.5 screw ring to fasten the pinhole. - The optical axis height is unified at 25 mm from the bottom surface.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Variable Slit

    Variable Slit

    SURUGA SEIKI

    [Features] - This is a double opening variable slit. - The width of the slit is adjusted by the micrometer head. - The slit width and center position is constant. - The inclination of the slit is reduced during operation because a V grooved rail and cross roller are used for the double opening slit guide. - The slit height is adjusted by the Hartmann plate

    CAD
    2D3D
    Days to Ship
    8 Days
  • Iris Diaphragm

    Iris Diaphragm

    SURUGA SEIKI

    [Features] - A holder with an iris diaphragm. - The diaphragm's aperture can be changed between ø 1.5 and ø 27 mm. - Fixing can be done by rotating the knob (used with a clamp) for changing the aperture of the diaphragm.

    CAD
    2D3D
    Days to Ship
    8 Days

Configure

Clear All
  • Metric / Inch

    • metric

Narrow search by specifying Manufacturer

Brand

MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close