Empowering Engineers with

Configurable Components

Our business hours: Mon. - Fri. 7 a.m. - 9 p.m. ET | Sat. 8 a.m - 5 p.m. ET.

All Categories

Category Search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Press Die Components
Plastic Mold Components

Brand Search
Brand List

Laser Holders

Days to Ship
  • ALL
  • 8 Days or Less
  • Sensor/laser holder

    Sensor/laser holder

    Suruga Seiki

    [Features] · The tilt angle of a small sensor or laser pointer can be adjusted. · A P.C.D.32 tap hole is processed in the holder surface, and therefore please mount on various adapter plates.

    CAD
    2D3D
    Days to Ship
    8 Days
  • LD Holder (Chip Carrier Type)

    LD Holder (Chip Carrier Type)

    Suruga Seiki

    [Features] · Chip Carrier type LD holder that contains a Peltier device. · A Peltier element and calibrated 10kΩ thermistor sensor are built-in. · You can switch between the anode and the cathode of the LD by reconnecting the jumper pin. · There are two types of Chip Carrier type LD holder. Set the holder, depending on how the LD is attached (the radiation direction). · A D-sub 9 pin female connector is used for driving LD, and a D-sub 9 pin male connector for the temperature controller. · Adapter for water-cooling F129-1 is also available. · The low-temperature cyclic water tank can stabilize or lower temperature.

    CAD
    2D3D
    Days to Ship
    8 Days
  • Round Laser Holder

    Round Laser Holder

    Suruga Seiki

    [Features] · F20 fixes the laser with three screws, and adjusts optical axis with the screws coming in and out of the body. · In addition to the function of F20, F21 enables you to adjust θy direction by operating the screw of the holder bottom. · For both F20 and F21, two types of holders, L= 150 and 250, are provided according to the length of the laser. · The standard rod has 20 mm of diameter and 60 mm of length; however, the diameter and the length can be changed at your request. · If you remove the fixed screw from its bottom, the laser hold can be fixed at a position 50 mm further from the space in which the holder can move (only for F20-150, and 250). · By removing the rod, you can attach F20 to the breadboard (A65) directly.

    CAD
    2D3D
    Days to Ship
    8 Days
  • LD Holder

    LD Holder

    Suruga Seiki

    F511L: Fixed type. LD holder with adjustable F512L and F513L: YZ axes. Select according to the number of LD pins and pin pitch (Pin P.C.D).

    CAD
    2D3D
    Days to Ship
    8 Days
  • LD holder (To-Package type)

    LD holder (To-Package type)

    Suruga Seiki

    [Features] · LD holder of To-Package type with built-in Peltier element. · A Peltier element and calibrated 10kΩ thermistor sensor are built-in. · The LD sizes are φ 5.6 (pin PCD, 2.0) and φ 9.0 (pin PCD, 2.54) for three and four pins, respectively. · In addition, anode common, cathode common, etc. are set by replacing the jumper pin. · For the connector, D-sub9 pin female are D-sub9 pin male are used for LD drive and temperature control, respectively. · The adapter F129-1 for water cooling is also available. · Usage of a low-temperature circulation water tank, etc. enables more stabilization and lower temperature.

    CAD
    2D3D
    Days to Ship
    Quote
  • Water cooling adapter

    Water cooling adapter

    Suruga Seiki

    [Features] · Adapter for water cooling for LD holder F125/F126/F127. · Connection with a low-temperature circulating water layer enables better temperature stability and better low temperature control. · Connect it with a 1/4 inch hose (No hose is included)

    CAD
    2D3D
    Days to Ship
    8 Days

Configure

Clear All
  • Metric / Inch

    • metric

Narrow search by specifying Manufacturer

Brand

MISUMI Public Circulation Product Business

CAD Type

  • 2D
  • 3D

Select Image

Close