Rotary Shafts - Straight (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) are available. Please select based on your applications.
Configure Now
Ships as soon as | 2 Days |
---|
Rotary Shafts with Selectable End Shape (MISUMI)
MISUMI
Configure Now
Ships as soon as | 2 Days |
---|
Rotary Shafts - Retaining Ring Grooves on Both Ends (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with retaining rings can be selected.
Configure Now
Ships as soon as | 2 Days |
---|
Rotary Shafts - Both Ends Tapped (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with both ends tapped are available.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - D Cut (MISUMI)
MISUMI
Applicable for Carrier Roller Rotation Prevention.
Configure Now
Ships as soon as | 2 Days |
---|
Rotary Shafts - Both Ends Stepped (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with both ends stepped can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Tapped (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with one end tapped are available.
Configure Now
Ships as soon as | 5 Days |
---|
Hollow Rotary Shafts - Straight (MISUMI)
MISUMI
Configure Now
Ships as soon as | 7 Days |
---|
Straight Rotary Shafts with Key Grooves (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with keyways can be selected.
Configure Now
Ships as soon as | 2 Days |
---|
Rotary Shafts - Straight, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Retaining Ring Grooves on Both Ends, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped and Threaded (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with one end stepped, and one end threaded can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with one end stepped can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts with Retaining Ring Grooves on Both Ends and Key Grooves (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with keyways and retaining rings can be selected.
Configure Now
Ships as soon as | 2 Days |
---|
Rotary Shafts - Both Ends Tapped, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped and Threaded (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with both ends stepped, both ends threaded can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts with Both Ends Tapped and Key Grooves (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with both ends tapped, and with keyway can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped and Tapped (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with both ends stepped, both ends tapped can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts for Tension - Push or Pull Type (MISUMI)
MISUMI
Applicable for Belt Conveyor Tension Adjustment.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Double Stepped (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One Threaded End, One Tapped End, Inch Measurements, Locknuts (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts with One End Tapped and Key Grooves (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with one end threaded and keyways are available.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - For Tension (MISUMI)
MISUMI
Applicable for Belt Conveyor Tension Adjustment.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped and Tapped (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped, Both Ends Tapped (MISUMI)
MISUMI
g6 (ground), h7 (ground) and h9 (polished) toleranced with one end stepped, and both ends tapped can be selected.
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped, One End Threaded, One End Tapped (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped with Retaining Ring Groove (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One Tapped End, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Threaded, Inch Measurements, Locknuts (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped, One End Threaded, One End Tapped (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped, One End Threaded (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped with Retaining Ring Groove (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shaft - One-End Stepped, One-End Tapped (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Threaded, Metric, Locknuts (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - Both Ends Stepped and Tapped, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One Stepped End, Both Ends Tapped, Inch Measurements (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One Threaded End, One Tapped End, Metric, Locknuts (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Rotary Shafts - One End Stepped and Tapped, One End Threaded, Metric, Locknuts (MISUMI)
MISUMI
Configure Now
Ships as soon as | 5 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Basic Shape |
Shaft Dia. D(mm) |
Shaft Dia. D(inch) |
End Shape (Left) |
End Shape (Right) |
Material |
Heat Treatment |
Surface Finish |
Keyway |
Shaft Dia. Tolerance (Metric Only) |
Length L(inch) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Rotary Shafts - Retaining Ring Grooves on Both Ends (MISUMI) | Rotary Shafts - Retaining Ring Grooves on Both Ends, Inch Measurements (MISUMI) | Rotary Shafts with Retaining Ring Grooves on Both Ends and Key Grooves (MISUMI) | Rotary Shafts - Both Ends Tapped, Inch Measurements (MISUMI) | Rotary Shafts with Both Ends Tapped and Key Grooves (MISUMI) | Rotary Shafts - One Threaded End, One Tapped End, Inch Measurements, Locknuts (MISUMI) | Rotary Shafts - Both Ends Stepped, Inch Measurements (MISUMI) | Rotary Shafts - One End Stepped, One End Threaded, One End Tapped (MISUMI) | Rotary Shafts - One End Stepped with Retaining Ring Groove (MISUMI) | Rotary Shafts - Both Ends Threaded, Inch Measurements, Locknuts (MISUMI) | Rotary Shafts - Both Ends Stepped, One End Threaded, One End Tapped (MISUMI) | Rotary Shafts - Both Ends Stepped, One End Threaded (MISUMI) | Rotary Shafts - Both Ends Stepped with Retaining Ring Groove (MISUMI) | Rotary Shafts - Both Ends Threaded, Metric, Locknuts (MISUMI) | Rotary Shafts - Both Ends Stepped and Tapped, Inch Measurements (MISUMI) | Rotary Shafts - One Stepped End, Both Ends Tapped, Inch Measurements (MISUMI) | Rotary Shafts - One Threaded End, One Tapped End, Metric, Locknuts (MISUMI) | Rotary Shafts - One End Stepped and Tapped, One End Threaded, Metric, Locknuts (MISUMI) | ||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship | 2 Days | 2 Days | 2 Days | 5 Days | 2 Days | 5 Days | 5 Days | 7 Days | 2 Days | 5 Days | 5 Days | 5 Days | 5 Days | 2 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic Shape | Straight | Straight / One End Stepped / Both Ends Stepped | Straight | Straight | Straight | Both Ends Stepped | Straight | Hollow | Straight | Straight | Straight | One End Stepped | One End Stepped | Straight | Straight | Both Ends Stepped | Straight | Both Ends Stepped | Straight | Both Ends Double Stepped | One End Stepped | Straight | Both Ends Stepped | Straight | One End Stepped | One End Stepped | One End Stepped | One End Stepped | Straight | Both Ends Stepped | Both Ends Stepped | Both Ends Stepped | Both Ends Stepped | One End Stepped | Both Ends Stepped | Both Ends Stepped | One End Stepped | One End Stepped | Both Ends Stepped | Both Ends Stepped |
Shaft Dia. D(mm) | 2 ~ 50 | 6 ~ 50 | 2 ~ 50 | 4 ~ 50 | 6 ~ 30 | 6 ~ 50 | 4 ~ 50 | 10 ~ 50 | 6 ~ 50 | - | - | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | - | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | 6 ~ 35 | 6 ~ 30 | - | 6 ~ 50 | - | 8 ~ 30 | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | - | - | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | 6 ~ 50 | - | - | - | - | - | - |
Shaft Dia. D(inch) | - | - | - | - | - | - | - | - | - | 1 ~ 5/8 | 1 ~ 5/8 | - | - | - | 1 ~ 5/8 | - | - | - | - | - | 1 ~ 5/8 | - | 1 ~ 5/8 | - | - | - | - | - | 1 ~ 5/8 | 1 ~ 5/8 | - | - | - | - | 1 ~ 5/8 | 1 ~ 5/8 | 1 ~ 5/8 | 1 ~ 5/8 | 1 ~ 5/8 | 1 ~ 5/8 |
End Shape (Left) | No Machining | No Machining / Tapped / Threaded / Retaining Ring Groove / Hex Hole / Tapped Holes | Retaining Ring Groove | Tapped | D-Cut | No Machining | Tapped | No Machining | No Machining | No Machining | Retaining Ring Groove | Threaded | No Machining | Retaining Ring Groove | Tapped | Threaded | Tapped | Tapped | For Tension | No Machining | Threaded | Tapped | No Machining | For Tension | Tapped | Tapped | Threaded | Retaining Ring Groove | Tapped | Threaded | Tapped | No Machining | Retaining Ring Groove | No Machining | Threaded | Tapped | Tapped | Threaded | Tapped | Tapped |
End Shape (Right) | No Machining | No Machining / Tapped / Threaded / Retaining Ring Groove / Hex Hole / Tapped Holes | Retaining Ring Groove | Tapped | D-Cut | No Machining | No Machining | No Machining | No Machining | No Machining | Retaining Ring Groove | No Machining | No Machining | Retaining Ring Groove | Tapped | Threaded | Tapped | Tapped | For Tension | No Machining | Tapped | No Machining | No Machining | For Tension | No Machining | Tapped | Tapped | No Machining | No Machining | Threaded | Threaded | Threaded | Retaining Ring Groove | Tapped | Threaded | Tapped | Tapped | Tapped | Threaded | Threaded |
Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel |
Heat Treatment | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened / Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened | Not Hardened |
Surface Finish | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel | None / Black Oxide / Electroless Nickel |
Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | w/o Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | w/o Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | With Keyway | Keyway Option (Alteration) | w/o Keyway | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) | Keyway Option (Alteration) |
Shaft Dia. Tolerance (Metric Only) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | - | - | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | - | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) | g6 (Ground) | - | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | - | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | g6 (Ground) | - | - | g6 (Ground) | g6 (Ground) | g6 (Ground) | h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) | - | - | - | - | - | - |
Length L(inch) | - | - | - | - | - | - | - | - | - | 0.75 ~ 30 | 0.75 ~ 30 | - | - | - | 0.75 ~ 30 | - | - | - | - | - | 0.75 ~ 29 | - | 0.75 ~ 29.5 | - | - | - | - | - | 0.75 ~ 30 | 0.75 ~ 28 | - | - | - | - | 0.75 ~ 28 | 0.75 ~ 29.5 | 0.75 ~ 29.75 | 0.75 ~ 29 | 0.75 ~ 28 | 0.75 ~ 28 |
Loading...
[0.75-30/0.01inch Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy