MenuClose
Cam Followers & Roller Followers
Filter by Category
-
- Special Discount Until 10/20/2023
- Recommendation
Cam Followers - Hex Socket on Head, Flat
MISUMI
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
THK
[Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - NAST-ZZ Series
THK
NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
This model is an economical Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series
THK
[Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Tightening Method: Hex Socket on Head
• Unit: Metric Series- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Standard Type Cam Follower - with Cage, Sealed Type, CFBUU Series【1-10 Pieces Per Package】
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Sealed Type
·With Hexagon Hole
·CFBUU Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Cam Followers - Hex Socket on Head, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Standard
• Tightening Method: Hex Socket on Head- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
MISUMI
• Roller Type: Crowned Type
• Category: Roller Follower
• Roller Follower Type: Non-Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Roller Followers - Separate, Cylindrical
MISUMI
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
THK
Cam follower with an extremely fine needle roller.
[Features]
· Easy to use in limited spaces due to the small outer diameter- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Standard Type Cam Follower - with Cage, Shield Type, CFB Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
·CFB Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Cam Follower - Miniature Type, CFSV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type
·CFSV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Stud Type Track Roller - Axial Guidance, Plastic Axial Plain Washers on Both Sides, KR..-PP Series
INA (Schaeffler)
Stud-type track rollers have outer rings with a crowned outside surface, heavy-section roller studs and ball and cage assemblies with plastic cages.
·Plastic axial plain washers on both sides
·KR-PP..SeriesConfigure Now
Ships as soon as 8 Days -
Cam Follower - Needle Roller, Standard Stud, Seals with Internal Thrust Washers, Hexagon Head
Koyo Bearings
Cam Followers are designed with outer rings of large radial cross section to withstand heavy rolling and shock loads on track-type or cam-controlled equipment. The outside diameters of the outer rings are either profiled or cylindrical.
• Cam followers are characterized by their thick-walled outer rings which run directly on a track
• The thick outer rings permit high load-carrying capability while minimizing distortion and bending stresses
Applications:
• Ram support rollers
• Material handling and indexing equipment
• Features and Benefits
• Standard Stud
• Seals with External Washers
•Hexagon HeadConfigure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Roller Follower Pins - Threaded
MISUMI
• Category: Roller Follower Pin
- Volume Discount is available
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Material: 52100 Bearing Steel
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Track Roller - Double Row, Sealed on Both Sides, LR52 Series
INA (Schaeffler)
Ball bearing track rollers are self-retaining, single or double-row units with particularly thick-walled outer rings. In addition to high radial forces, these bearings can also support axial forces in both directions. The outer rings have a crowned or cylindrical outside surface.
•Double Row
•Sealed on both sides
•LR52 Series- CAD Available in 2D and 3D
Configure Now
Ships as soon as 8 Days -
- Special Discount Until 10/20/2023
Cylindrical Roller Follower - Full Complement Type, with Inner Ring, NURT Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Full Complement Type
·with Inner Ring
·Crowned Outer Ring
·NURT Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Cam Followers - Hex Socket on Head and Shank, Flat
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Cam Follower - Needle Roller, Standard Stud, Seals with Internal Thrust Washers
Koyo Bearings
Cam Followers are designed with outer rings of large radial cross section to withstand heavy rolling and shock loads on track-type or cam-controlled equipment. The outside diameters of the outer rings are either profiled or cylindrical.
• Cam followers are characterized by their thick-walled outer rings which run directly on a track
• The thick outer rings permit high load-carrying capability while minimizing distortion and bending stresses
Applications:
• Ram support rollers
• Material handling and indexing equipment
• Features and Benefits
• Standard Stud
• Seals with External WashersConfigure Now
Ships as soon as Same Day Stock Items Included
-
THK
Cam follower with stud head and screw section normally used for tap pipe processing.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Standard Type, CFV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Standard Type
·CFV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Needle Roller, Yolk Type, Seals with Internal Thrust Washers
Koyo Bearings
Cam Followers are designed with outer rings of large radial cross section to withstand heavy rolling and shock loads on track-type or cam-controlled equipment. The outside diameters of the outer rings are either profiled or cylindrical.
• Cam followers are characterized by their thick-walled outer rings which run directly on a track
• The thick outer rings permit high load-carrying capability while minimizing distortion and bending stresses
Applications:
• Ram support rollers
• Material handling and indexing equipment
• Features and Benefits
• Yolk Type
• Seals with External WashersConfigure Now
Ships as soon as 23 Days -
- Special Discount Until 10/20/2023
Cam Followers - Straight Slot, Flat
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Cam Follower Type: Standard
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Standard Type Cam Follower - Full Complement Type, Sealed Type, CFVBUUR Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement
·Sealed Type
·With Hexagon Hole
·CFVBUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Roller Follower - Separable, NAST Series
IKO
Combining an outer ring, inner ring and Needle Roller Cage, which can be separated from one another, assembles these bearings. Thus, handling is easy. Oil lubrication is also easy,making them suitable for high-speed rotations.There are two types: type without inner ring RNAST and type with inner ring NAST.
·Separatable
·NAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
SKF
Cam Rollers are designed to run on all types of tracks and to be used in cam drives, conveyor systems, etc. The outer ring running surface is crowned as standard.
Double row cam rollers are also available with a cylindrical (flat) outer ring running surface. SKF supplies cam rollers greased, sealed and ready-to-mount.- Volume Discount is available
Configure Now
Ships as soon as 12 Days -
- Special Discount Until 10/20/2023
Cam Followers - Straight Slot, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Standard
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Separable Roller Follower - with Cage, with Inner Ring, NASTZZ Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·with Cage<
·NASTZZ Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Non-Separatable
·with Inner Ring
·Sealed Type
·NARTUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Cam Follower - Needle Roller, Eccentric Stud, Seals with Internal Thrust Washers, Hexagon Head
Koyo Bearings
Cam Followers are designed with outer rings of large radial cross section to withstand heavy rolling and shock loads on track-type or cam-controlled equipment. The outside diameters of the outer rings are either profiled or cylindrical.
• Cam followers are characterized by their thick-walled outer rings which run directly on a track
• The thick outer rings permit high load-carrying capability while minimizing distortion and bending stresses
Applications:
• Ram support rollers
• Material handling and indexing equipment
• Features and Benefits
• Eccentric Stud
• Seals with External Washers.
•Hexagon HeadConfigure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - without Seal, Cylindrical Wheel Rim, Hex Socket Head
JMC
Suitable for static and heavy loads at medium and low speeds for use in numerous automatic machines, conveying guide rollers, and cam mechanism rollers.
• Without Seal
• Cylindrical Wheel Rim
• Hexagon Socket Head- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·without Inner Ring
·Open Type
·with Cage
·RNAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
Cam Follower - Polyurethane Coated, 90A Durometer
MERIDIAN LABORATORY ML6
Meridian Laboratory ML6 polyurethane coated cam followers (otherwise referred to as track rollers) feature a threaded stud to fit directly into a component or secure with a nut for through-hole mounting. All Meridian Laboratory ML6 polyurethane coated cam followers are high quality, American-made, sealed needle bearings, complete with lubrication ports in the ends of the shaft for maximum longevity.
• Non-marking, durable polyurethane coating
• Improved traction against contact surfaces
• Reduced wear and increased longevity of contact surfaces
• Reduces noise while rotating
• Stud allows for threading directly into machine or secured with a nut
• Black Oxide 52100 Steel
•90A Durometer- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
- Special Discount Until 10/20/2023
Roller Followers - Urethane, Solid, Flat
MISUMI
• Roller Lining: With Urethane
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
NTN
A track roller with studs instead of the inner ring allows the outer ring to roll and move on the track.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Roller Followers - Urethane, Seperate, R
MISUMI
• Roller Lining: With Urethane
• Roller Type: Type R
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower Pins - Retaining Ring
MISUMI
• Category: Roller Follower Pin
- Lead Time Reduction
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 5 Days -
THK
A cam follower where precision adjustment of the position is easily performed by turning the stud,
as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Isolation bearing combining a thick inner inner ring and precision cage with needle roller.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Cam Followers - with Urethane Roller, Crowned, with Hex Socket
MISUMI
• Shaft: Provided
• Roller Lining: With Urethane
• Category: Cam Followers
• Roller Guiding Method: Retainer Type
• Tightening Method: Hex Socket on Head- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
-
- Special Discount Until 10/20/2023
Resin Cam Followers - Standard
MISUMI
• Shaft: Provided
• Roller Lining: With Resin
• Category: Cam Followers
• Roller Guiding Method: Retainer Type
• Unit: Metric Series- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Special Price Ships as soon as Same Day Stock Items Included
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Roller Type |
| Roller Outer Diameter D(mm) |
| Roller Outer Diameter D(in) |
| Roller Width B(mm) |
| Roller Width B(in) |
| Roller Follower Inner Diameter(mm) |
| Roller Follower Inner Diameter(in) |
| Thread Size on Cam Follower (M)(mm) |
| Thread Size on Cam Follower (M)(in) |
| Tightening Method |
| Cam Follower: Stud Screw (Fine Thread)(mm) |
| Material |
| Roller Lining |
| Cam Follower Type |
| Roller Follower Type |
| Shaft |
| Roller Guiding Method |
| Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | THK | THK | THK | THK | THK | MISUMI | IKO | MISUMI | MISUMI | MISUMI | THK | IKO | IKO | INA (Schaeffler) | Koyo Bearings | MISUMI | MISUMI | INA (Schaeffler) | IKO | MISUMI | Koyo Bearings | THK | IKO | Koyo Bearings | MISUMI | IKO | IKO | SKF | MISUMI | IKO | IKO | Koyo Bearings | JMC | IKO | MERIDIAN LABORATORY ML6 | MISUMI | NTN | MISUMI | THK | MISUMI | THK | THK | MISUMI | MISUMI |
| Product Series | Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series | Standard Type Cam Follower - with Cage, Sealed Type, CFBUU Series【1-10 Pieces Per Package】 | Standard Type Cam Follower - with Cage, Shield Type, CFB Series | Stud Type Track Roller - Axial Guidance, Plastic Axial Plain Washers on Both Sides, KR..-PP Series | Cam Follower - Needle Roller, Standard Stud, Seals with Internal Thrust Washers, Hexagon Head | Track Roller - Double Row, Sealed on Both Sides, LR52 Series | Cylindrical Roller Follower - Full Complement Type, with Inner Ring, NURT Series | Cam Follower - Needle Roller, Standard Stud, Seals with Internal Thrust Washers | Cam Follower - Needle Roller, Yolk Type, Seals with Internal Thrust Washers | Standard Type Cam Follower - Full Complement Type, Sealed Type, CFVBUUR Series | Separable Roller Follower - with Cage, with Inner Ring, NASTZZ Series | Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series | Cam Follower - Needle Roller, Eccentric Stud, Seals with Internal Thrust Washers, Hexagon Head | Cam Follower - without Seal, Cylindrical Wheel Rim, Hex Socket Head | Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series | Cam Followers - with Urethane Roller, Crowned, with Hex Socket | |||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 8 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 8 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 23 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 12 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 5 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Category | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Cam Followers | Cam Followers | Cam Followers | - | - | Roller Follower Pin | Cam Followers | - | Roller Follower | Cam Followers | - | Cam Followers | Cam Followers | - | Cam Followers | Cam Followers | Roller Follower | - | Cam Followers | Roller Follower | Roller Follower | - | Cam Followers | Roller Follower | Cam Followers | Roller Follower | Cam Followers | Roller Follower | Cam Followers | Roller Follower Pin | Cam Followers | Roller Follower | Cam Followers | Cam Followers |
| Roller Type | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | - | Cylindrical Outer Ring | - | Cylindrical Outer Ring | - | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | - | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | - | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring |
| Roller Outer Diameter D(mm) | 10 ～ 26 | 10 ～ 26 | 19 ～ 90 | 13 ～ 26 | 30 ～ 90 | 16 ～ 90 | 5 ～ 12 | 10 ～ 90 | 10 ～ 32 | 16 ～ 47 | 19 ～ 47 | 5 ～ 12 | 10 ～ 90 | 4.5 ～ 12 | 16 ～ 90 | - | - | 10 ～ 19 | 32 ～ 85 | 35 ～ 110 | 30 ～ 90 | - | 16 ～ 90 | 12 ～ 47 | - | 13 ～ 52 | 16 ～ 90 | 16 ～ 110 | 160 ～ 900 | 13 ～ 35 | 19 ～ 90 | 16 ～ 90 | - | 13 ～ 90 | 16 ～ 90 | - | 16 ～ 32 | 10 ～ 90 | 19 ～ 32 | 30 ～ 90 | - | 13 ～ 26 | 19 ～ 90 | 13 ～ 26 | 13 ～ 26 |
| Roller Outer Diameter D(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 7/8 | - | - | - | - | - | 1 ～ 7/8 | - | - | 1 ～ 7/8 | - | - | - | - | - | - | - | 1 ～ 5/8 | - | - | 1 ～ 3/4 | - | - | - | - | - | - | - | - | - |
| Roller Width B(mm) | 7 ～ 12 | 7 ～ 12 | 13.8 ～ 25.8 | 9 ～ 12 | 14 ～ 35 | 11 ～ 32 | 3 ～ 7 | 7 ～ 35 | 7 ～ 14 | 11 ～ 24 | 9.8 ～ 19.8 | 3 ～ 7 | 7 ～ 35 | 2.5 ～ 7 | 28 ～ 100 | - | - | 8.5 ～ 12 | 14 ～ 30.2 | 18 ～ 30 | 14 ～ 35 | - | 11 ～ 35 | 8 ～ 24 | - | 9 ～ 24 | 11 ～ 35 | 11 ～ 30 | 15.2 ～ 1000 | 9 ～ 18 | 13.8 ～ 25.8 | 11 ～ 30 | - | 9 ～ 35 | 7.8 ～ 19.8 | - | 11 ～ 14 | 7 ～ 36 | 9.8 ～ 15.8 | 14 ～ 35 | - | 9 ～ 12 | 9.8 ～ 19.8 | 9 ～ 12 | 9 ～ 12 |
| Roller Width B(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 11/32 | - | - | - | - | - | 1 ～ 11/32 | - | - | 1 ～ 7/8 | - | - | - | - | - | - | - | 1 ～ 11/32 | - | - | 1 ～ 7/8 | - | - | - | - | - | - | - | - | - |
| Roller Follower Inner Diameter(mm) | - | - | 6 ～ 50 | - | - | 5 ～ 50 | - | - | - | 5 ～ 20 | 6 ～ 20 | - | - | - | 6 ～ 30 | - | - | - | 10 ～ 40 | 15 ～ 50 | - | - | - | - | - | - | - | 5 ～ 55 | - | - | 6 ～ 50 | 5 ～ 50 | - | - | 7 ～ 60 | - | 5 ～ 12 | 4 ～ 38 | 6 ～ 12 | - | - | - | 6 ～ 50 | - | - |
| Roller Follower Inner Diameter(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 7/16 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size on Cam Follower (M)(mm) | M3x0.5 ～ M10x1.25 | M3x0.5 ～ M10x1.25 | - | M5x0.8 ～ M10x1.25 | M12x1.5 ～ M30x1.5 | - | M2.5x0.45 ～ M6x1.0 | M3x0.5 ～ M10x1.25 | M3x0.5 ～ M12x1.5 | - | - | M2.5x0.45 ～ M6x1.0 | M3x0.5 ～ M10x1.25 | M2x0.4 ～ M6x1.0 | - | - | - | M3x0.5 ～ M8x1.25 | - | - | M12x1.5 ～ M30x1.5 | - | M6x1.0 ～ M30x1.5 | M4x0.7 ～ M20x1.5 | - | M5x0.8 ～ M20x1.5 | M6x1.0 ～ M10x1.25 | - | - | M5x0.8 ～ M16x1.5 | - | - | - | M5x0.8 ～ M30x1.5 | - | - | - | M3x0.5 ～ M30x1.5 | - | M12x1.5 ～ M30x1.5 | - | M5x0.8 ～ M10x1.25 | - | M5x0.8 ～ M10x1.25 | M5x0.8 ～ M10x1.25 |
| Thread Size on Cam Follower (M)(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | UNF 1-14 ～ UNF 10-32 | - | - | - | - | - | UNF 1-14 ～ UNF 10-32 | - | - | - | - | - | - | - | - | - | - | UNF 1-14 ～ UNF 10-32 | - | - | UNF 1/2-20 ～ UNF 10-32 | - | - | - | - | - | - | - | - | - |
| Tightening Method | Hex Socket on Head | Hex Socket on Head | - | With Driver Groove | Hex Socket on Head, Thread Side | - | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | - | - | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | - | Hex Socket on Head | - | Hex Socket on Head | - | - | Hex Socket on Head, Thread Side | With Driver Groove | With Driver Groove | Hex Socket on Head | - | With Driver Groove | Hex Socket on Head | - | - | With Driver Groove | - | - | Hex Socket on Head | Hex Socket on Head | - | Hex Socket on Head | - | Hex Socket on Head / With Driver Groove | - | Hex Socket on Head, Thread Side | - | Hex Socket on Head / With Driver Groove | - | Hex Socket on Head | Hex Socket on Head / With Driver Groove |
| Cam Follower: Stud Screw (Fine Thread)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | - | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | - | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | - | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel |
| Roller Lining | None | None | None | None | None | None | None | None | None | None | None | None | None | None | - | - | None | None | - | None | None | - | None | None | - | None | None | None | - | None | None | None | - | None | None | With Urethane | With Urethane | None | With Urethane | None | None | None | None | With Urethane | With Resin |
| Cam Follower Type | Standard | Standard | - | Standard | Standard | - | - | Standard | Standard | - | - | Standard | Standard | Miniature | - | Standard | - | - | - | - | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | - | Standard | - | - | Eccentric | Standard | - | Standard / With Urethane | - | Standard | - | Eccentric | - | Eccentric | - | - | - |
| Roller Follower Type | - | - | Separate | - | - | Non-Separate | - | - | - | Non-Separate | Separate | - | - | - | - | Non-Separate | - | - | - | With Urethane | - | Non-Separate | - | - | Non-Separate | - | - | Separate / Non-Separate / With Urethane | - | - | Separate | Non-Separate | Non-Separate | - | Separate | With Urethane | With Urethane | - | With Urethane | - | - | - | Separate | - | - |
| Shaft | Provided | Provided | None | Provided | Provided | None | Provided | Provided | Provided | None | None | Provided | Provided | Provided | - | - | None | Provided | - | None | Provided | - | Provided | Provided | - | Provided | Provided | None | - | Provided | None | None | - | Provided | None | Provided | None | Provided | None | Provided | None | Provided | None | Provided | Provided |
| Roller Guiding Method | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | - | Full Roller Type | - | Retainer Type | - | Full Roller Type | Retainer Type / Full Roller Type | Full Roller Type | Retainer Type | Retainer Type | Full Roller Type | Retainer Type | Full Roller Type | Retainer Type / Full Roller Type | - | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Full Roller Type | Full Roller Type | Retainer Type | Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | - | Retainer Type | Retainer Type | Retainer Type | Retainer Type |
| Inner Ring | - | - | Provided | - | - | Provided | - | - | - | Provided | Provided | - | - | - | - | - | - | - | - | Provided | - | - | - | - | - | - | - | None / Provided | - | - | Provided | Provided | - | - | None | None | Provided | None | Provided | - | - | - | Provided | - | - |
Loading...
Configure
Filters
-
Roller Type
-
Metric / Inch
-
Roller Outer Diameter D(mm)
-
Roller Outer Diameter D(in)
-
Roller Width B(mm)
- 1.7
- 2.5
- 3
- 4
- 5
- 6
- 7
- 7.8
- 8
- 8.5
- 9
- 9.8
- 10
- 11
- 11.8
- 12
- 13
- 13.8
- 14
- 15
- 15.2
- 15.8
- 15.9
- 16
- 17
- 17.5
- 17.8
- 18
- 19
- 19.5
- 19.8
- 20
- 20.6
- 21
- 21.5
- 22.2
- 22.7
- 23.8
- 24
- 24.8
- 25
- 25.4
- 25.5
- 25.8
- 26
- 26.5
- 27
- 28
- 29
- 30
- 30.2
- 30.5
- 30.7
- 32
- 33.2
- 33.8
- 34.9
- 35
- 36
- 36.2
- 36.5
- 37
- 38.7
- 39.5
- 40
- 43
- 45.3
- 49.2
- 50
- 50.4
- 52
- 53
- 53.2
- 58
- 58.8
- 59
- 63
- 63.6
- 66
- 69.2
- 70.9
- 74.1
- 76
- 80
- 91
- 100
- 120
- 140
- 150
- 160
- 190
- 210
- 250
- 280
- 290
- 320
- 360
- 400
- 520
- 580
- 660
- 800
- 1000
-
Roller Width B(in)
-
Roller Follower Inner Diameter(mm)
-
Roller Follower Inner Diameter(in)
-
Thread Size on Cam Follower (M)(mm)
-
Thread Size on Cam Follower (M)(in)
-
Tightening Method
-
Cam Follower: Stud Screw (Fine Thread)(mm)
-
Material
-
Roller Lining
-
Cam Follower Type
-
Roller Follower Type
-
Shaft
-
Roller Guiding Method
-
Inner Ring
Brand
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same Day
- 1 Day or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy