MenuClose
Cam Followers & Roller Followers（Roller Guiding Method：Retainer Type）
Filter by Category
-
Cam Followers -
Roller Follower -
Bracket for Cam Follower -
Roller Follower Pin
-
- Recommendation
Cam Followers - Hex Socket on Head, Flat
MISUMI
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
[Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
This model is an economical Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - NAST-ZZ Series
THK
NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series
THK
[Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Tightening Method: Hex Socket on Head
• Unit: Metric Series- Volume Discount is available
- Shorter lead time
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Standard Type Cam Follower - with Cage, Sealed Type, CFBUU Series【1-10 Pieces Per Package】
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Sealed Type
·With Hexagon Hole
·CFBUU Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Roller Type: Crowned Type
• Category: Roller Follower
• Roller Follower Type: Non-Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Hex Socket on Head, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Standard
• Tightening Method: Hex Socket on Head- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Separate, Cylindrical
MISUMI
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Cam follower with an extremely fine needle roller.
[Features]
· Easy to use in limited spaces due to the small outer diameter- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Straight Slot, Flat
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Cam Follower Type: Standard
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Cam follower with stud head and screw section normally used for tap pipe processing.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Separable, NAST Series
IKO
Combining an outer ring, inner ring and Needle Roller Cage, which can be separated from one another, assembles these bearings. Thus, handling is easy. Oil lubrication is also easy,making them suitable for high-speed rotations.There are two types: type without inner ring RNAST and type with inner ring NAST.
·Separatable
·NAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Standard Type Cam Follower - with Cage, Shield Type, CFB Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
·CFB Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
A cam follower where precision adjustment of the position is easily performed by turning the stud,
as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Cam Followers - Hex Socket on Head and Shank, Flat
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Miniature Type, CFSV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type
·CFSV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Standard Type, CFV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Standard Type
·CFV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Cam Followers - Hex Socket on Head and Shank, Crowned
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Straight Slot, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Standard
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Material: 52100 Bearing Steel
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Non-Separatable
·with Inner Ring
·Sealed Type
·NARTUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Solid Eccentric Cam Followers - Hex Socket, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Cam Follower Type: Eccentric
• Material: 52100 Bearing Steel- Volume Discount is available
- Specification updated recently
- Price reduced
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Solid Eccentric Cam Followers - Hex Socket, Cylindrical
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Eccentric
• Material: 52100 Bearing Steel- Volume Discount is available
- Specification updated recently
- Price reduced
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - with Cage, NATR Series
NTN
[Features]-A spherical bearing used for the mechanism by which the outer ring rolls on the orbit.
-with Cage
-NATR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Miniature, CFSF Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type
·CFSF Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Cam Follower - for Central Piping, CF-F/R Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·for Central Piping
·CF-F/R Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Cam Followers - with Urethane Roller, Crowned, with Hex Socket
MISUMI
• Shaft: Provided
• Roller Lining: With Urethane
• Category: Cam Followers
• Roller Guiding Method: Retainer Type
• Tightening Method: Hex Socket on Head- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Separate, Crowned
MISUMI
• Roller Type: Crowned Type
• Category: Roller Follower
• Roller Follower Type: Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
[Features]-A type in which the studs are stepped and can be fixed with screws to simplify installation.-Ideal for equipment that does not have a stud fastening space.・ CF-SFU type is available only with a sticker.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·without Inner Ring
·Open Type
·with Cage
·RNAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - with Cage, with Hexagon Hole, Sealed Type, Inch, CRBUU Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Sealed Type
·With Hexagon Hole
·CRBUU Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Eccentric Type Cam Follower - with Cage, with Screwdriver Slot, Sealed Type
IKO
In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
• Eccentric Type
• With Cage
• Sealed
• with Screwdriver Slot- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
NTN
A track roller with studs instead of the inner ring allows the outer ring to roll and move on the track.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Roller Followers - Urethane, Seperate, Flat
MISUMI
• Roller Lining: With Urethane
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - RNAST Series
THK
Roller follower used in linear motion applications. NAST type without inner ring.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Miniature Type, Stainless Steel, CFSFV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type.
·Stainless Steel
·CFSFV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Isolation bearing combining a thick inner inner ring and precision cage with needle roller.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Solid, Flat
MISUMI
• Roller Lining: With Urethane
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Seperate, R
MISUMI
• Roller Lining: With Urethane
• Roller Type: Type R
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Yoke Type Track Roller - Axial Guidance, Gap Seals on Both Sides, NATR Series
INA (Schaeffler)
Yoke-type track rollers are single or double-row units mounted on shafts or studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full-complement rolling element sets.
• gap seals on both sides
• with axial guidance- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Cam Followers - Tapped for Grease Fitting, Crown
MISUMI
Tapped holes for grease fittings are provided. Installation is simple.
- Volume Discount is available
- Shorter lead time
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Roller Type |
| Roller Outer Diameter D(mm) |
| Roller Outer Diameter D(in) |
| Roller Width B(mm) |
| Roller Width B(in) |
| Roller Follower Inner Diameter(mm) |
| Roller Follower Inner Diameter(in) |
| Thread Size on Cam Follower (M)(mm) |
| Thread Size on Cam Follower (M)(in) |
| Tightening Method |
| Material |
| Roller Lining |
| Cam Follower Type |
| Roller Follower Type |
| Shaft |
| Roller Guiding Method |
| Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | THK | THK | THK | THK | THK | MISUMI | IKO | MISUMI | MISUMI | MISUMI | THK | THK | MISUMI | THK | IKO | IKO | THK | MISUMI | IKO | IKO | MISUMI | MISUMI | MISUMI | IKO | MISUMI | MISUMI | NTN | IKO | IKO | MISUMI | MISUMI | THK | IKO | IKO | IKO | NTN | MISUMI | THK | IKO | THK | MISUMI | MISUMI | INA (Schaeffler) | MISUMI |
| Product Series | Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series | Standard Type Cam Follower - with Cage, Sealed Type, CFBUU Series【1-10 Pieces Per Package】 | Standard Type Cam Follower - with Cage, Shield Type, CFB Series | Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series | Cam Followers - with Urethane Roller, Crowned, with Hex Socket | Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series | Cam Follower - with Cage, with Hexagon Hole, Sealed Type, Inch, CRBUU Series | Eccentric Type Cam Follower - with Cage, with Screwdriver Slot, Sealed Type | Cam Follower - Miniature Type, Stainless Steel, CFSFV Series | Yoke Type Track Roller - Axial Guidance, Gap Seals on Both Sides, NATR Series | |||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
| Category | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Cam Followers | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Cam Followers |
| Roller Type | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring |
| Roller Outer Diameter D(mm) | 10 ～ 26 | 10 ～ 26 | 13 ～ 26 | 30 ～ 90 | 19 ～ 90 | 16 ～ 90 | 5 ～ 12 | 10 ～ 90 | 16 ～ 47 | 10 ～ 32 | 19 ～ 47 | 30 ～ 90 | 5 ～ 12 | 13 ～ 52 | 16 ～ 90 | 16 ～ 90 | 10 ～ 90 | 13 ～ 26 | 30 ～ 90 | 4.5 ～ 12 | 12 ～ 47 | 30 ～ 90 | 13 ～ 35 | 10 ～ 19 | 16 ～ 90 | 16 ～ 90 | 16 ～ 90 | 16 ～ 90 | 6 ～ 10 | 16 ～ 85 | 13 ～ 26 | 19 ～ 47 | 16 ～ 52 | 16 ～ 90 | - | - | 13 ～ 90 | 19 ～ 32 | 16 ～ 32 | 8 ～ 12 | 19 ～ 90 | 16 ～ 32 | 19 ～ 32 | 16 ～ 62 | 16 ～ 52 |
| Roller Outer Diameter D(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1-7/8 ～ 7/8 | 1 ～ 7/8 | - | - | - | - | - | - | - | - | - |
| Roller Width B(mm) | 7 ～ 12 | 7 ～ 12 | 9 ～ 12 | 14 ～ 35 | 13.8 ～ 25.8 | 11 ～ 32 | 3 ～ 7 | 7 ～ 35 | 11 ～ 24 | 7 ～ 14 | 9.8 ～ 19.8 | 14 ～ 35 | 3 ～ 7 | 9 ～ 24 | 11 ～ 35 | 11 ～ 30 | 7 ～ 35 | 9 ～ 12 | 14 ～ 35 | 2.5 ～ 7 | 8 ～ 24 | 14 ～ 35 | 9 ～ 18 | 8.5 ～ 12 | 11 ～ 30 | 11 ～ 35 | 11 ～ 35 | 12 ～ 32 | 4 ～ 6 | 11 ～ 35 | 9 ～ 12 | 9.8 ～ 15.8 | 11 ～ 24 | 7.8 ～ 19.8 | - | - | 9 ～ 35 | 9.8 ～ 15.8 | 7.8 ～ 11.8 | 5 ～ 7 | 9.8 ～ 19.8 | 11 ～ 14 | 9.8 ～ 15.8 | 12 ～ 29 | 11 ～ 24 |
| Roller Width B(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 11/32 | 1 ～ 13/32 | - | - | - | - | - | - | - | - | - |
| Roller Follower Inner Diameter(mm) | - | - | - | - | 6 ～ 50 | 5 ～ 50 | - | - | 5 ～ 20 | - | 6 ～ 20 | - | - | - | - | 5 ～ 55 | - | - | - | - | - | - | - | - | 5 ～ 50 | - | - | 5 ～ 50 | - | - | - | 6 ～ 20 | - | 7 ～ 60 | - | - | 5.75 ～ 38 | 6 ～ 12 | 7 ～ 16 | - | 6 ～ 50 | 5 ～ 12 | 6 ～ 12 | 5 ～ 30 | - |
| Roller Follower Inner Diameter(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size on Cam Follower (M)(mm) | M3x0.5 ～ M10x1.25 | M3x0.5 ～ M10x1.25 | M5x0.8 ～ M10x1.25 | M12x1.5 ～ M30x1.5 | - | - | M2.5x0.45 ～ M6x1.0 | M3x0.5 ～ M10x1.25 | - | M3x0.5 ～ M12x1.5 | - | M12x1.5 ～ M30x1.5 | M2.5x0.45 ～ M6x1.0 | M5x0.8 ～ M20x1.5 | M6x1.0 ～ M30x1.5 | - | M3x0.5 ～ M10x1.25 | M5x0.8 ～ M10x1.25 | M12x1.5 ～ M30x1.5 | M2x0.4 ～ M6x1.0 | M4x0.7 ～ M20x1.5 | M12x1.5 ～ M30x1.5 | M5x0.8 ～ M16x1.5 | M3x0.5 ～ M8x1.25 | - | M6x1.0 ～ M30x1.5 | M6x1.0 ～ M30x1.5 | - | M3x0.5 ～ M5x0.8 | M6x1.0 ～ M30x1.5 | M5x0.8 ～ M10x1.25 | - | - | - | - | - | M5x0.8 ～ M30x1.5 | - | - | M4x0.7 ～ M6x1.0 | - | - | - | - | M6x1.0 ～ M20x1.5 |
| Thread Size on Cam Follower (M)(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | UNF 1/4-28 ～ UNF 10-32 | UNF 1/2-20 ～ UNF 10-32 | - | - | - | - | - | - | - | - | - |
| Tightening Method | Hex Socket on Head | Hex Socket on Head | With Driver Groove | Hex Socket on Head, Thread Side | - | - | Hex Socket on Head | Hex Socket on Head | - | Hex Socket on Head | - | Hex Socket on Head, Thread Side | Hex Socket on Head | With Driver Groove | With Driver Groove | - | Hex Socket on Head | Hex Socket on Head / With Driver Groove | Hex Socket on Head, Thread Side | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head, Thread Side | With Driver Groove | Hex Socket on Head | - | Hex Socket on Head / Hex Socket on Head, Thread Side | Hex Socket on Head / Hex Socket on Head, Thread Side | - | Hex Socket on Head | With Driver Groove | Hex Socket on Head | - | - | - | Hex Socket on Head | With Driver Groove | Hex Socket on Head / With Driver Groove | - | - | Hex Socket on Head | - | - | - | - | With Driver Groove |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel |
| Roller Lining | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | - | None | None | With Urethane | None | None | None | None | None | - | With Urethane | None | None | None | With Urethane | With Urethane | None | None |
| Cam Follower Type | Standard | Standard | Standard | Standard | - | - | - | Standard | - | Standard | - | Eccentric | Standard | Standard | Standard | - | Standard | Eccentric | Standard | Miniature | Standard | Standard | Standard | - | - | Eccentric | Eccentric | - | Standard | Tapped Hole for Mounting Type for Grease Nipple | - | - | Standard | - | Standard | Standard | Standard | - | - | Miniature | - | - | - | - | - |
| Roller Follower Type | - | - | - | - | Separate | Non-Separate | - | - | Non-Separate | - | Separate | - | - | - | - | Separate / Non-Separate | - | - | - | - | - | - | - | - | Non-Separate | - | - | Non-Separate | - | - | - | Separate | - | Separate | - | - | - | With Urethane | Separate | - | Separate | With Urethane | With Urethane | - | - |
| Shaft | Provided | Provided | Provided | Provided | None | None | Provided | Provided | None | Provided | None | Provided | Provided | Provided | Provided | None | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided | None | Provided | Provided | Provided | None | Provided | None | Provided | Provided | Provided | None | None | Provided | None | None | None | None | Provided |
| Roller Guiding Method | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type |
| Inner Ring | - | - | - | - | Provided | Provided | - | - | Provided | - | Provided | - | - | - | - | None / Provided | - | - | - | - | - | - | - | - | Provided | - | - | Provided | - | - | - | Provided | - | None | - | - | None | Provided | None | - | Provided | Provided | Provided | Provided | - |
Loading...
Configure
Filters
-
Roller Type
-
Spherical Outer Ring -
Cylindrical Outer Ring
-
-
Metric / Inch
- metric
- inch
-
Roller Outer Diameter D(mm)
-
Roller Outer Diameter D(in)
-
Roller Width B(mm)
- 1.7
- 2.5
- 3
- 4
- 5
- 6
- 7
- 7.8
- 8
- 8.5
- 9
- 9.8
- 10
- 11
- 11.8
- 12
- 13
- 13.8
- 14
- 15
- 15.2
- 15.8
- 15.9
- 16
- 17
- 17.5
- 17.8
- 18
- 19
- 19.5
- 19.8
- 20
- 20.6
- 21
- 21.5
- 22.2
- 22.7
- 23.8
- 24
- 24.8
- 25
- 25.4
- 25.5
- 25.8
- 26
- 26.5
- 27
- 28
- 29
- 30
- 30.2
- 30.5
- 30.7
- 32
- 33.2
- 33.8
- 34.9
- 35
- 36
- 36.2
- 36.5
- 37
- 38.7
- 39.5
- 40
- 43
- 45.3
- 49.2
- 50
- 50.4
- 52
- 53
- 53.2
- 58
- 58.8
- 59
- 63
- 63.6
- 66
- 69.2
- 70.9
- 74.1
- 76
- 80
- 91
- 100
- 120
- 140
- 150
- 160
- 190
- 210
- 250
- 280
- 290
- 320
- 360
- 400
- 520
- 580
- 660
- 800
- 1000
-
Roller Width B(in)
-
Roller Follower Inner Diameter(mm)
-
Roller Follower Inner Diameter(in)
-
Thread Size on Cam Follower (M)(mm)
-
Thread Size on Cam Follower (M)(in)
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head, Thread Side -
With Driver Groove
-
-
Material
- Carbon Steel
- Stainless Steel
-
Roller Lining
-
Cam Follower Type
-
Roller Follower Type
-
Shaft
-
Roller Guiding Method
-
Inner Ring
Brand
-
- IKO (37)
- THK (13)
- NTN (6)
- RBC Bearings (1)
- INA (Schaeffler) (1)
- JMC (0)
- MERIDIAN LABORATORY ML6 (0)
- Koyo Bearings (0)
- SKF (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same Day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy