MenuClose
Cam Followers & Roller Followers（Unit：Metric Series）
Filter by Category
-
Cam Followers -
Roller Follower -
Bracket for Cam Follower -
Roller Follower Pin
-
THK
[Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
This model is an economical Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Hex Socket on Head, Flat
MISUMI
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Tightening Method: Hex Socket on Head
• Unit: Metric Series- Volume Discount is available
- Shorter lead time
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Hex Socket on Head, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Standard
• Tightening Method: Hex Socket on Head- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - NAST-ZZ Series
THK
NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series
THK
[Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Standard Type Cam Follower - with Cage, Sealed Type, CFBUU Series【1-10 Pieces Per Package】
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Sealed Type
·With Hexagon Hole
·CFBUU Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Roller Type: Crowned Type
• Category: Roller Follower
• Roller Follower Type: Non-Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Cam follower with an extremely fine needle roller.
[Features]
· Easy to use in limited spaces due to the small outer diameter- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Cam Followers - Hex Socket on Head and Shank, Flat
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Miniature Type, CFSV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type
·CFSV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Separate, Cylindrical
MISUMI
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
- New Products
Cam Followers - Hex Socket on Head and Shank, Crowned
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Cam follower with stud head and screw section normally used for tap pipe processing.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cylindrical Roller Follower - Full Complement Type, with Inner Ring, NURT Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Full Complement Type
·with Inner Ring
·Crowned Outer Ring
·NURT Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Standard Type Cam Follower - Full Complement Type, Sealed Type, CFVBUUR Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement
·Sealed Type
·With Hexagon Hole
·CFVBUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Standard Type Cam Follower - with Cage, Shield Type, CFB Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
·CFB Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
A cam follower where precision adjustment of the position is easily performed by turning the stud,
as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Straight Slot, Flat
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Cam Follower Type: Standard
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Solid Eccentric Cam Followers - Hex Socket, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Cam Follower Type: Eccentric
• Material: 52100 Bearing Steel- Volume Discount is available
- Specification updated recently
- Price reduced
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Isolation bearing combining a thick inner inner ring and precision cage with needle roller.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - without Seal, Cylindrical Wheel Rim, Hex Socket Head
JMC
Suitable for static and heavy loads at medium and low speeds for use in numerous automatic machines, conveying guide rollers, and cam mechanism rollers.
• Without Seal
• Cylindrical Wheel Rim
• Hexagon Socket Head- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
NTN
A track roller with studs instead of the inner ring allows the outer ring to roll and move on the track.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Roller Follower - with Cage, NATR Series
NTN
[Features]-A spherical bearing used for the mechanism by which the outer ring rolls on the orbit.
-with Cage
-NATR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Non-Separatable
·with Inner Ring
·Sealed Type
·NARTUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - Straight Slot, Crowned
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Standard
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Followers - with Urethane Roller, Crowned, with Hex Socket
MISUMI
• Shaft: Provided
• Roller Lining: With Urethane
• Category: Cam Followers
• Roller Guiding Method: Retainer Type
• Tightening Method: Hex Socket on Head- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Resin Cam Followers - Standard
MISUMI
• Shaft: Provided
• Roller Lining: With Resin
• Category: Cam Followers
• Roller Guiding Method: Retainer Type
• Unit: Metric Series- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Solid, Flat
MISUMI
• Roller Lining: With Urethane
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Shaft: Provided
• Roller Type: Cylindrical Outer Ring
• Category: Cam Followers
• Material: 52100 Bearing Steel
• Roller Guiding Method: Retainer Type- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - CF Type, with Seal, Cylindrical Wheel Rim, Hex Socket Head
JMC
SUJ2 is used for the material of each part. Suitable for static and heavy loads at medium and low speeds for use in numerous automatic machines, conveying guide rollers, and cam mechanism rollers.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Resin Cam Followers - Press Fit, Flat
MISUMI
MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.
- Volume Discount is available
- Specification updated recently
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Separable, NAST Series
IKO
Combining an outer ring, inner ring and Needle Roller Cage, which can be separated from one another, assembles these bearings. Thus, handling is easy. Oil lubrication is also easy,making them suitable for high-speed rotations.There are two types: type without inner ring RNAST and type with inner ring NAST.
·Separatable
·NAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Solid Eccentric Cam Followers - Hex Socket, Cylindrical
MISUMI
• Shaft: Provided
• Roller Type: Crowned Type
• Category: Cam Followers
• Cam Follower Type: Eccentric
• Material: 52100 Bearing Steel- Volume Discount is available
- Specification updated recently
- Price reduced
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Standard Type, CFV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Standard Type
·CFV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Standard Type Cam Follower - with Cage, Sealed Type, CFFBUU Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
Stainless Steel
·CFFBUU Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·without Inner Ring
·Open Type
·with Cage
·RNAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Double Row, Cylindrical Roller Type, NUTR Series
NTN
A mechanism that allows the outer ring to roll on the track, and is a bearing used for eccentric rollers, guide rollers, rocker arm rollers, cam rollers, and pressure rollers.
-Double Row
-Cylindrical Roller Type
-NUTR Series- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Full Roller Type, NATV Series
NTN
A bearing used for a mechanism in which the outer ring rolls on a track. Roller follower is without a stud.
• Full Roller Type
• NATV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cam Follower - Miniature Type, Stainless Steel, CFSFV Series
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type.
·Stainless Steel
·CFSFV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Seperate, R
MISUMI
• Roller Lining: With Urethane
• Roller Type: Type R
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
[Features]-A type in which the studs are stepped and can be fixed with screws to simplify installation.-Ideal for equipment that does not have a stud fastening space.・ CF-SFU type is available only with a sticker.
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Roller Type |
| Roller O.D. D(Ø) |
| Roller Width B(mm) |
| Roller Follower ID(mm) |
| Thread Size on Cam Follower (M)(mm) |
| Tightening Method |
| Cam Follower: Stud Screw (Fine Thread)(mm) |
| Material |
| Roller Lining |
| Cam Follower Type |
| Roller Follower Type |
| Shaft |
| Unit |
| Roller Guiding Method |
| Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | MISUMI | MISUMI | THK | MISUMI | THK | THK | IKO | MISUMI | THK | MISUMI | IKO | MISUMI | MISUMI | THK | IKO | IKO | IKO | THK | THK | MISUMI | MISUMI | THK | JMC | NTN | NTN | IKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | JMC | MISUMI | IKO | MISUMI | IKO | IKO | IKO | NTN | NTN | IKO | MISUMI | THK |
| Product Series | Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series | Standard Type Cam Follower - with Cage, Sealed Type, CFBUU Series【1-10 Pieces Per Package】 | Cylindrical Roller Follower - Full Complement Type, with Inner Ring, NURT Series | Standard Type Cam Follower - Full Complement Type, Sealed Type, CFVBUUR Series | Standard Type Cam Follower - with Cage, Shield Type, CFB Series | Cam Follower - without Seal, Cylindrical Wheel Rim, Hex Socket Head | Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series | Cam Followers - with Urethane Roller, Crowned, with Hex Socket | Cam Follower - CF Type, with Seal, Cylindrical Wheel Rim, Hex Socket Head | Standard Type Cam Follower - with Cage, Sealed Type, CFFBUU Series | Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series | Roller Follower - Double Row, Cylindrical Roller Type, NUTR Series | Cam Follower - Miniature Type, Stainless Steel, CFSFV Series | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day
Stock Items Included |
Same Day Stock Items Included | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||
| Category | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Roller Follower | Cam Followers | Roller Follower | Cam Followers |
| Roller Type | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring |
| Roller O.D. D(Ø) | 10 ～ 26 | 13 ～ 85 | 10 ～ 52 | 5 ～ 12 | 30 ～ 90 | 10 ～ 40 | 19 ～ 90 | 16 ～ 90 | 10 ～ 90 | 16 ～ 47 | 5 ～ 12 | 30 ～ 90 | 4.5 ～ 12 | 19 ～ 47 | 30 ～ 52 | 16 ～ 90 | 35 ～ 110 | 16 ～ 90 | 10 ～ 90 | 30 ～ 90 | 13 ～ 26 | 13 ～ 52 | 16 ～ 90 | 19 ～ 90 | 13 ～ 90 | 12 ～ 90 | 16 ～ 90 | 16 ～ 90 | 13 ～ 52 | 13 ～ 26 | 13 ～ 26 | 16 ～ 32 | 10 ～ 19 | 16 ～ 80 | 13 ～ 35 | 16 ～ 110 | 16 ～ 90 | 12 ～ 47 | 10 ～ 52 | 16 ～ 90 | 35 ～ 110 | 16 ～ 90 | 4.5 ～ 12 | 19 ～ 32 | 16 ～ 52 |
| Roller Width B(mm) | 7 ～ 12 | 9 ～ 35 | 7 ～ 24 | 3 ～ 7 | 14 ～ 35 | 7 ～ 20 | 13.8 ～ 25.8 | 11 ～ 32 | 7 ～ 35 | 11 ～ 24 | 3 ～ 7 | 14 ～ 35 | 2.5 ～ 7 | 9.8 ～ 19.8 | 14 ～ 24 | 11 ～ 35 | 18 ～ 30 | 11 ～ 35 | 7 ～ 35 | 14 ～ 35 | 9 ～ 12 | 9 ～ 24 | 11 ～ 35 | 9.8 ～ 19.8 | 9 ～ 35 | 8 ～ 36 | 12 ～ 32 | 11 ～ 30 | 9 ～ 24 | 9 ～ 12 | 9 ～ 12 | 11 ～ 14 | 8.5 ～ 12 | 11 ～ 35 | 9 ～ 18 | 11 ～ 30 | 11 ～ 35 | 8 ～ 24 | 7 ～ 24 | 7.8 ～ 19.8 | 19 ～ 32 | 12 ～ 32 | 2.5 ～ 7 | 9.8 ～ 15.8 | 11 ～ 24 |
| Roller Follower ID(mm) | - | - | - | - | - | - | 6 ～ 50 | 5 ～ 50 | - | 5 ～ 20 | - | - | - | 6 ～ 20 | - | - | 15 ～ 50 | - | - | - | - | - | - | 6 ～ 50 | - | 4.8 ～ 38 | 5 ～ 50 | 5 ～ 50 | - | - | - | 5 ～ 12 | - | - | - | 5 ～ 55 | - | - | - | 7 ～ 60 | 15 ～ 50 | 5 ～ 50 | - | 6 ～ 12 | - |
| Thread Size on Cam Follower (M)(mm) | M3×0.5 ～ M10×1.25 | M5×0.8 ～ M30×1.5 | M3 ～ M20 | M2.5 ～ M6 | M12×1.5 ～ M30×1.5 | M3 ～ M18 | - | - | M 3x0.5 ～ M10x1.25 | - | M2.5×0.45 ～ M6×1.0 | M12 ～ M30 | M2 x0.4 ～ M6x1 | - | M12 ～ M20 | M6×1.0 ～ M30×1.5 | - | M 6x1 ～ M 10x1.25 | 3 ～ M10x1.25 | M12×1.5 ～ M30×1.5 | M5×0.8 ～ M10×1.25 | M5 ～ M20 | M6 ～ M30 | - | M5 ～ M30 | M4×0.7 ～ M8×1.25 | - | - | M5 ～ M20 | M5 ～ M10 | M5 ～ M10 | - | M3 ～ M8 | M6 ～ M30 | M5 ～ M16 | - | M6 ～ M30 | 4 ～ 20 | M 3x0.5 ～ M10x1.25 | - | - | - | M2x0.4 ～ M6x1 | - | - |
| Tightening Method | Hex Socket on Head | With Driver Groove | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head, Thread Side | Hex Socket on Head | - | - | Hex Socket on Head | - | Hex Socket on Head | Hex Socket on Head, Thread Side | Hex Socket on Head | - | Hex Socket on Head, Thread Side | With Driver Groove | - | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head, Thread Side | Hex Socket on Head / With Driver Groove | With Driver Groove | Hex Socket on Head / Hex Socket on Head, Thread Side | - | Hex Socket on Head | Hex Socket on Head / With Driver Groove | - | - | With Driver Groove | Hex Socket on Head | Hex Socket on Head / With Driver Groove | - | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head / Hex Socket on Head, Thread Side / With Driver Groove | - | Hex Socket on Head / Hex Socket on Head, Thread Side | Hex Socket on Head | Hex Socket on Head | - | - | - | Hex Socket on Head | - | - |
| Cam Follower: Stud Screw (Fine Thread)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M10×1.25 ～ M30×1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel |
| Roller Lining | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | - | None | None | With Urethane | With Resin | With Urethane | None | None | With Resin | None | None | None | None | None | - | - | None | With Urethane | None |
| Cam Follower Type | Standard | Standard | Standard | - | Standard | Standard | - | - | Standard | - | Standard | Standard | Miniature | - | Standard | Standard | - | Standard | Standard | Eccentric | Eccentric | Standard | Eccentric | - | Standard | Standard | - | - | Standard | - | - | - | - | Standard | - | - | Eccentric | Standard | Standard | - | - | - | Miniature | - | Standard |
| Roller Follower Type | - | - | - | - | - | - | Separate | Non-Separate | - | Non-Separate | - | - | - | Separate | - | - | With Urethane | - | - | - | - | - | - | Separate | - | - | Non-Separate | Non-Separate | - | - | - | With Urethane | - | - | - | Separate / Non-Separate / With Urethane | - | - | - | Separate | With Urethane | Non-Separate | - | With Urethane | - |
| Shaft | Provided | Provided | Provided | Provided | Provided | Provided | None | None | Provided | None | Provided | Provided | Provided | None | Provided | Provided | None | Provided | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided | None | None | Provided | Provided | Provided | None | Provided | Provided | Provided | None | Provided | Provided | Provided | None | None | None | Provided | None | Provided |
| Unit | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series |
| Roller Guiding Method | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Full Roller Type | Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Full Roller Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Multi-Row Cylindrical Rollers | Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type |
| Inner Ring | - | - | - | - | - | - | Provided | Provided | - | Provided | - | - | - | Provided | - | - | Provided | - | - | - | - | - | - | Provided | - | None | Provided | Provided | - | - | - | Provided | - | - | - | None / Provided | - | - | - | None | Provided | Provided | - | Provided | - |
Loading...
Configure
Filters
-
Roller Type
-
Spherical Outer Ring -
Cylindrical Outer Ring
-
-
Metric / Inch
- metric
-
Roller O.D. D(Ø)
- 0.75"
- 1"
- 1.25"
- 1.5"
- 1.75"
- 2"
- 2.25"
- 0.5
- 0.63
- 0.75
- 0.88
- 1
- 1.13
- 1.25
- 1.38
- 1.5
- 1.63
- 1.75
- 1.88
- 1/2
- 10
- 100
- 1000
- 110
- 1100
- 12
- 12.7
- 120
- 13
- 15.875
- 150
- 16
- 160
- 17
- 18
- 180
- 19
- 19.05
- 190
- 2
- 2.25
- 2.5
- 2.75
- 20
- 22
- 22.225
- 220
- 24
- 240
- 25
- 25.4
- 25.4(1")
- 26
- 260
- 28
- 28.575
- 3
- 3.25
- 3.5
- 3/4
- 30
- 300
- 31.75
- 32
- 320
- 34.925
- 35
- 350
- 38.1
- 4
- 4.5
- 40
- 400
- 41.275
- 42
- 420
- 44.45
- 47
- 47.625
- 470
- 5
- 5/8
- 50.8
- 52
- 520
- 57.15
- 6
- 62
- 620
- 68
- 7/8
- 72
- 720
- 8
- 80
- 800
- 85
- 850
- 90
- 900
-
Roller Width B(mm)
- 0.375"
- 0.5"
- 0.625"
- 0.75"
- 0.875"
- 1"
- 1.25"
- 0.35
- 0.38
- 0.44
- 0.5
- 0.63
- 0.75
- 0.88
- 1
- 1.25
- 1.5
- 1.7
- 1.75
- 1/2
- 1/3
- 10
- 10.319
- 100
- 1000
- 11
- 11.112
- 11.8
- 12
- 12.7
- 120
- 13
- 13.8
- 14
- 140
- 15
- 15.2
- 15.8
- 15.875
- 15.875 (5/8")
- 15.9
- 150
- 16
- 160
- 17
- 17.5
- 17.8
- 18
- 19
- 19.05
- 19.5
- 19.8
- 190
- 2
- 2.25
- 2.5
- 2.75
- 2/5
- 20
- 20.6
- 21
- 21.5
- 210
- 22.2
- 22.225
- 22.7
- 23.8
- 24
- 24.8
- 25
- 25.4
- 25.5
- 25.8
- 250
- 26
- 26.5
- 27
- 28
- 280
- 29
- 290
- 3
- 3.25
- 3/7
- 3/8
- 30
- 30.2
- 30.5
- 30.7
- 31.75
- 32
- 320
- 33.2
- 33.8
- 34.9
- 35
- 36
- 36.2
- 36.5
- 360
- 37
- 38.7
- 39.5
- 4
- 40
- 400
- 43
- 45.3
- 49.2
- 5
- 50
- 50.4
- 52
- 520
- 53
- 53.2
- 58
- 58.8
- 580
- 59
- 6
- 63
- 63.6
- 66
- 660
- 69.2
- 7
- 7.8
- 70.9
- 74.1
- 76
- 8
- 8.5
- 8.731
- 80
- 800
- 9
- 9.525
- 9.8
- 91
-
Roller Follower ID(mm)
-
Thread Size on Cam Follower (M)(mm)
- UNF No.10-32
- 1/2"-20
- UNF 1/2-20
- 1/4-28
- 1/4 - 28
- M1.4x0.3
- 2
- M2 x0.4
- M2x0.4
- 2.5
- M2.5
- M2.5x0.45
- M2.5×0.45
- 3
- M3
- M3 x0.5
- M3x0.5
- M3×0.5
- M 3x0.5
- 3/4"-16
- 3/8-24
- 3/8"-24
- UNF 3/8-24
- 4
- M4
- M4 x0.7
- M4x0.7
- M4×0.7
- M 4x0.7
- 4.826
- 5
- M5
- M5 x0.8
- M5x0.8
- M5×0.8
- M 5x0.8
- 5/8"-18
- UNF 5/8-18
- 6
- M6
- M6 x1
- M6x1
- M6×1.0
- M6×1
- M 6x1
- M 6x 1
- 6.350
- 7/8"-14
- UNF 7/8-14
- 7/16-20UNF
- 7/16"-20
- UNF 7/16-20
- 8
- M8
- M8×1.25
- M 8x1.25
- M 8x 1.25
- 9.525
- 10
- M10
- 10-32
- M10 X 1.0
- M10x1.25
- M10×1.25
- M 10x1.25
- 11.112
- 12
- M12
- M12 X 1.5
- M12x1.5
- M12×1.5
- 12.700
- 15.875
- 16
- M16
- M16 X 1.5
- M16×1.5
- 18
- M18
- M18 X 1.5
- M18x1.5
- M18×1.5
- 19.050
- 20
- M20
- M20 X 1.5
- M20x1.5
- M20×1.5
- 22.225
- 24
- M24
- M24 X 1.5
- M24x1.5
- M24×1.5
- 30
- M30
- M30 X 1.5
- M30×1.5
- M36×1.5
- M42
- M42×1.5
- M52
- M64
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head, Thread Side -
Screw with Hex Socket -
With Driver Groove
-
-
Cam Follower: Stud Screw (Fine Thread)(mm)
-
Material
- Carbon Steel
- Stainless Steel
-
Roller Lining
- None
- With Resin
- With Urethane
-
Cam Follower Type
-
Roller Follower Type
-
Shaft
-
Unit
-
Roller Guiding Method
-
Inner Ring
Brand
-
- IKO (41)
- THK (13)
- NTN (12)
- INA (Schaeffler) (2)
- JMC (2)
- RBC BEARINGS (0)
- Koyo Bearings (0)
- SKF (0)
- MERIDIAN LABORATORY ML6 (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same Day
- 2 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy