MenuClose
Cam Followers & Roller Followers（Category：Roller Follower）
Filter by Category
-
Cam Followers -
Roller Follower -
Bracket for Cam Follower -
Roller Follower Pin
-
Roller Follower - NAST-ZZ Series
THK
NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series
THK
[Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
MISUMI
• Roller Type: Crowned Type
• Category: Roller Follower
• Roller Follower Type: Non-Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Separate, Cylindrical
MISUMI
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cylindrical Roller Follower - Full Complement Type, with Inner Ring, NURT Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Full Complement Type
·with Inner Ring
·Crowned Outer Ring
·NURT Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Separable, NAST Series
IKO
Combining an outer ring, inner ring and Needle Roller Cage, which can be separated from one another, assembles these bearings. Thus, handling is easy. Oil lubrication is also easy,making them suitable for high-speed rotations.There are two types: type without inner ring RNAST and type with inner ring NAST.
·Separatable
·NAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Non-Separatable
·with Inner Ring
·Sealed Type
·NARTUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - with Cage, NATR Series
NTN
[Features]-A spherical bearing used for the mechanism by which the outer ring rolls on the orbit.
-with Cage
-NATR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Yoke Roller - Polyurethane Coated, 90A Durometer
MERIDIAN LABORATORY ML6
Meridian Laboratory ML6 polyurethane coated yoke cam followers (otherwise referred to as yoke rollers) are available in the same sizes as our studded cam followers, however they feature a thru-bore rather than a threaded shaft. All Meridian Laboratory ML6 polyurethane coated yoke rollers are American-made with high strength steel (available in stainless steel), and are sealed with ports located inside the bore for relubrication of the bearings ensuring maximum longevity.
• Non-marking, durable polyurethane coating
• Improved traction against contact surfaces
• Reduced wear and increased longevity of contact surfaces
• Reduces noise while rotating
• Black Oxide 52100 Steel
•90A Durometer- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Roller Followers - Separate, Crowned
MISUMI
• Roller Type: Crowned Type
• Category: Roller Follower
• Roller Follower Type: Separate
• Roller Guiding Method: Retainer Type
• Inner Ring: Provided- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·without Inner Ring
·Open Type
·with Cage
·RNAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Seperate, Flat
MISUMI
• Roller Lining: With Urethane
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - RNAST Series
THK
Roller follower used in linear motion applications. NAST type without inner ring.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
THK
Isolation bearing combining a thick inner inner ring and precision cage with needle roller.
- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Solid, Flat
MISUMI
• Roller Lining: With Urethane
• Roller Type: Cylindrical Outer Ring
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Followers - Urethane, Seperate, R
MISUMI
• Roller Lining: With Urethane
• Roller Type: Type R
• Category: Roller Follower
• Roller Follower Type: With Urethane
• Material: 52100 Bearing Steel- Volume Discount is available
- Rapid Design
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Double Row, Cylindrical Roller Type, NUTR Series
NTN
A mechanism that allows the outer ring to roll on the track, and is a bearing used for eccentric rollers, guide rollers, rocker arm rollers, cam rollers, and pressure rollers.
-Double Row
-Cylindrical Roller Type
-NUTR Series- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
Yoke Type Track Roller - Axial Guidance, Gap Seals on Both Sides, NATR Series
INA (Schaeffler)
Yoke-type track rollers are single or double-row units mounted on shafts or studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full-complement rolling element sets.
• gap seals on both sides
• with axial guidance- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Roller Follower - Full Roller Type, NATV Series
NTN
A bearing used for a mechanism in which the outer ring rolls on a track. Roller follower is without a stud.
• Full Roller Type
• NATV Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Separable Roller Follower - with Cage, with Inner Ring, NASTZZ Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·with Cage<
·NASTZZ Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Yoke Roller - Polyurethane Coated, 55A Durometer
MERIDIAN LABORATORY ML6
Meridian Laboratory ML6 polyurethane coated yoke cam followers (otherwise referred to as yoke rollers) are available in the same sizes as our studded cam followers, however they feature a thru-bore rather than a threaded shaft. All Meridian Laboratory ML6 polyurethane coated yoke rollers are American-made with high strength steel (available in stainless steel), and are sealed with ports located inside the bore for relubrication of the bearings ensuring maximum longevity.
• Non-marking, durable polyurethane coating
• Improved traction against contact surfaces
• Reduced wear and increased longevity of contact surfaces
• Reduces noise while rotating
• Black Oxide 52100 Steel
•55A DurometerConfigure Now
Ships as soon as 7 Days -
Roller Follower - with Holder, RNA Series
NTN
A mechanism that allows the outer ring to roll on the track, and is a bearing used for eccentric rollers, guide rollers, rocker arm rollers, cam rollers, and pressure rollers.
-With Holder
-RNA Series- Volume Discount is available
Configure Now
Ships as soon as Same Day Stock Items Included
-
Separable Roller Follower - Open Type with Cage, with Inner Ring, NAST Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·with Inner Ring
·Open Type
·with Cage
·NAST Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Roller Follower - Non-Separable, with Cage, with Inner Ring, Shield Type, NARTR Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Non-Separatable
·with Inner Ring
·Shield Type
·NARTUUR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Same Day Stock Items Included
-
Cyindrical Roller Follower - Full Complement Type, with Inner Ring, Crowned Outer Ring, NURT Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Full Complement Type
·with Inner Ring
·Crowned Outer Ring
·NURT Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
Yoke Roller - Polyurethane Coated, 80A Durometer
MERIDIAN LABORATORY ML6
Meridian Laboratory ML6 polyurethane coated yoke cam followers (otherwise referred to as yoke rollers) are available in the same sizes as our studded cam followers, however they feature a thru-bore rather than a threaded shaft. All Meridian Laboratory ML6 polyurethane coated yoke rollers are American-made with high strength steel (available in stainless steel), and are sealed with ports located inside the bore for relubrication of the bearings ensuring maximum longevity.
• Non-marking, durable polyurethane coating
• Improved traction against contact surfaces
• Reduced wear and increased longevity of contact surfaces
• Reduces noise while rotating
• Black Oxide 52100 Steel
•80A Durometer- CAD Available in 2D and 3D
Configure Now
Ships as soon as 7 Days -
Roller Follower - with Holder, RNAB Series
NTN
A mechanism that allows the outer ring to roll on the track, and is a bearing used for eccentric rollers, guide rollers, rocker arm rollers, cam rollers, and pressure rollers.
-With Holder
-RNAB Series- Volume Discount is available
Configure Now
Ships as soon as 4 Days -
Separable Roller Follower - Sealed Type with Cage, with Inner Ring, NASTZZUU Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Separatable
·with Inner Ring
·Sealed Type
·with Cage
·NASTZZUU Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as 4 Days -
INA (Schaeffler)
Yoke-type track rollers are single or double-row units mounted on shafts or studs. They comprise thick-walled outer rings with a profiled outside surface and needle roller and cage assemblies or full-complement rolling element sets.
·With Axial Guidance
·Gap seals on both sides- CAD Available in 2D and 3D
Configure Now
Ships as soon as 8 Days -
Cam Follower - High Carbon Steel, Full Complement Type, with Inner Ring, Shield Type, NARTVR Series
IKO
IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
·Full Complement Type
·with Inner Ring
·with Hexagon Hole
·High Carbon Steel
·NARTVR Series- Volume Discount is available
- CAD Available in 2D and 3D
Configure Now
Ships as soon as Quote
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Roller Type |
| Roller Outer Diameter D(mm) |
| Roller Outer Diameter D(in) |
| Roller Width B(mm) |
| Roller Width B(in) |
| Roller Follower Inner Diameter(mm) |
| Roller Follower Inner Diameter(in) |
| Thread Size on Cam Follower (M)(mm) |
| Thread Size on Cam Follower (M)(in) |
| Tightening Method |
| Material |
| Roller Lining |
| Cam Follower Type |
| Roller Follower Type |
| Shaft |
| Roller Guiding Method |
| Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | MISUMI | MISUMI | IKO | IKO | IKO | NTN | MERIDIAN LABORATORY ML6 | MISUMI | IKO | MISUMI | THK | THK | MISUMI | MISUMI | NTN | INA (Schaeffler) | NTN | IKO | MERIDIAN LABORATORY ML6 | NTN | IKO | IKO | IKO | MERIDIAN LABORATORY ML6 | NTN | IKO | INA (Schaeffler) | IKO |
| Product Series | Roller Follower - Spherical Outer Ring, Non-Isolated, NART Series | Cylindrical Roller Follower - Full Complement Type, with Inner Ring, NURT Series | Roller Follower - Non-Separable, with Cage, with Inner Ring, Sealed Type, NARTUUR Series | Separable Roller Follower - Open Type with Cage, without Inner Ring , RNAST Series | Roller Follower - Double Row, Cylindrical Roller Type, NUTR Series | Yoke Type Track Roller - Axial Guidance, Gap Seals on Both Sides, NATR Series | Separable Roller Follower - with Cage, with Inner Ring, NASTZZ Series | Separable Roller Follower - Open Type with Cage, with Inner Ring, NAST Series | Roller Follower - Non-Separable, with Cage, with Inner Ring, Shield Type, NARTR Series | Cyindrical Roller Follower - Full Complement Type, with Inner Ring, Crowned Outer Ring, NURT Series | Separable Roller Follower - Sealed Type with Cage, with Inner Ring, NASTZZUU Series | Cam Follower - High Carbon Steel, Full Complement Type, with Inner Ring, Shield Type, NARTVR Series | ||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Days to Ship |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days |
Same Day Stock Items Included |
Same Day Stock Items Included | 7 Days |
Same Day Stock Items Included |
Same Day Stock Items Included |
Same Day Stock Items Included | 4 Days | 7 Days | 4 Days | 4 Days | 8 Days | Quote |
| Specifications |
|
|
|
|
|
| ||||||||||||||||||||||||
| Category | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower | Roller Follower |
| Roller Type | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring |
| Roller Outer Diameter D(mm) | 19 ～ 90 | 16 ～ 90 | 16 ～ 47 | 19 ～ 47 | 35 ～ 110 | 16 ～ 110 | 16 ～ 90 | 16 ～ 90 | - | 19 ～ 47 | 16 ～ 90 | 19 ～ 32 | 16 ～ 32 | 19 ～ 90 | 16 ～ 32 | 19 ～ 32 | 35 ～ 110 | 16 ～ 62 | 16 ～ 90 | 19 ～ 90 | - | 19 ～ 90 | 19 ～ 90 | 16 ～ 90 | 85 | - | 19 ～ 30 | 52 ～ 85 | 24 ～ 40 | 30 ～ 90 |
| Roller Outer Diameter D(in) | - | - | - | - | - | - | - | - | 1 ～ 2-1/4 | - | - | - | - | - | - | - | - | - | - | - | 1-1/2 | - | - | - | - | 1 ～ 2-1/4 | - | - | - | - |
| Roller Width B(mm) | 13.8 ～ 25.8 | 11 ～ 32 | 11 ～ 24 | 9.8 ～ 19.8 | 18 ～ 30 | 11 ～ 30 | 11 ～ 30 | 12 ～ 32 | - | 9.8 ～ 15.8 | 7.8 ～ 19.8 | 9.8 ～ 15.8 | 7.8 ～ 11.8 | 9.8 ～ 19.8 | 11 ～ 14 | 9.8 ～ 15.8 | 19 ～ 32 | 12 ～ 29 | 12 ～ 32 | 13.8 ～ 25.8 | - | 11.8 ～ 22.7 | 9.8 ～ 19.8 | 11 ～ 30 | 30 | - | 9.8 ～ 11.8 | 19.8 ～ 25.8 | 15 ～ 21 | 14 ～ 30 |
| Roller Width B(in) | - | - | - | - | - | - | - | - | 1 ～ 7/8 | - | - | - | - | - | - | - | - | - | - | - | 3/4 | - | - | - | - | 1 ～ 7/8 | - | - | - | - |
| Roller Follower Inner Diameter(mm) | 6 ～ 50 | 5 ～ 50 | 5 ～ 20 | 6 ～ 20 | 15 ～ 50 | 5 ～ 55 | 5 ～ 50 | 5 ～ 50 | - | 6 ～ 20 | 7 ～ 60 | 6 ～ 12 | 7 ～ 16 | 6 ～ 50 | 5 ～ 12 | 6 ～ 12 | 15 ～ 50 | 5 ～ 30 | 5 ～ 50 | 6 ～ 50 | - | 10 ～ 58 | 6 ～ 50 | 5 ～ 50 | 45 | - | 10 ～ 14 | 25 ～ 45 | 8 ～ 17 | 10 ～ 50 |
| Roller Follower Inner Diameter(in) | - | - | - | - | - | - | - | - | 1/2 ～ 7/16 | - | - | - | - | - | - | - | - | - | - | - | 3/8 | - | - | - | - | 1/2 ～ 7/16 | - | - | - | - |
| Thread Size on Cam Follower (M)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size on Cam Follower (M)(in) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | - | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | - | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel |
| Roller Lining | None | None | None | None | None | None | None | - | With Urethane | None | None | With Urethane | None | None | With Urethane | With Urethane | - | None | - | None | With Urethane | None | None | None | None | With Urethane | - | None | None | None |
| Cam Follower Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | - | - | - | - | - | - | - | - | - |
| Roller Follower Type | Separate | Non-Separate | Non-Separate | Separate | With Urethane | Separate / Non-Separate / With Urethane | Non-Separate | Non-Separate | With Urethane | Separate | Separate | With Urethane | Separate | Separate | With Urethane | With Urethane | With Urethane | - | Non-Separate | Separate | With Urethane | Non-Separate | Separate | Non-Separate | With Urethane | With Urethane | Non-Separate | Separate | - | Non-Separate |
| Shaft | None | None | None | None | None | None | None | None | - | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
| Roller Guiding Method | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | - | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Multi-Row Cylindrical Rollers | Retainer Type | Full Roller Type | Retainer Type | Full Roller Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Full Roller Type | - | Retainer Type | Retainer Type | Full Roller Type | Full Roller Type |
| Inner Ring | Provided | Provided | Provided | Provided | Provided | None / Provided | Provided | Provided | Provided | Provided | None | Provided | None | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided | Provided | Provided | None | Provided | Provided | Provided |
Loading...
Configure
Filters
-
Roller Type
-
Spherical Outer Ring -
Cylindrical Outer Ring
-
-
Metric / Inch
- metric
- inch
-
Roller Outer Diameter D(mm)
-
Roller Outer Diameter D(in)
-
Roller Width B(mm)
- 1.7
- 2.5
- 3
- 4
- 5
- 6
- 7
- 7.8
- 8
- 8.5
- 9
- 9.8
- 10
- 11
- 11.8
- 12
- 13
- 13.8
- 14
- 15
- 15.2
- 15.8
- 15.9
- 16
- 17
- 17.5
- 17.8
- 18
- 19
- 19.5
- 19.8
- 20
- 20.6
- 21
- 21.5
- 22.2
- 22.7
- 23.8
- 24
- 24.8
- 25
- 25.4
- 25.5
- 25.8
- 26
- 26.5
- 27
- 28
- 29
- 30
- 30.2
- 30.5
- 30.7
- 32
- 33.2
- 33.8
- 34.9
- 35
- 36
- 36.2
- 36.5
- 37
- 38.7
- 39.5
- 40
- 43
- 45.3
- 49.2
- 50
- 50.4
- 52
- 53
- 53.2
- 58
- 58.8
- 59
- 63
- 63.6
- 66
- 69.2
- 70.9
- 74.1
- 76
- 80
- 91
- 100
- 120
- 140
- 150
- 160
- 190
- 210
- 250
- 280
- 290
- 320
- 360
- 400
- 520
- 580
- 660
- 800
- 1000
-
Roller Width B(in)
-
Roller Follower Inner Diameter(mm)
-
Roller Follower Inner Diameter(in)
-
Thread Size on Cam Follower (M)(mm)
-
Thread Size on Cam Follower (M)(in)
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head, Thread Side -
With Driver Groove
-
-
Material
- Carbon Steel
- Stainless Steel
-
Roller Lining
-
Cam Follower Type
-
Roller Follower Type
-
Shaft
-
Roller Guiding Method
-
Inner Ring
Brand
-
- IKO (10)
- NTN (5)
- THK (4)
- MERIDIAN LABORATORY ML6 (3)
- INA (Schaeffler) (2)
- JMC (0)
- RBC Bearings (0)
- Koyo Bearings (0)
- SKF (0)
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same Day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy