All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Positioning Stages & Optical / Inspection Components
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- Connector
- Wire/Cable
- Crimp terminal
- Equipment supported cable
- Zip tie
- Cable gland
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Protection tube
- Duct/Wiring
- General purpose tool
- Dedicated tools
- Soldering supplies
- Personal computer/AV cable
- LAN/Network cable
- Cable with connector
- RS232C Cable
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Milling Cutter Insert / Holder
- Customized Straight Blade End Mill
- Dedicated Cutter
- Turning Tool
- Drill
- Screw Hole Related Tools
- Reamer
- Chamfering, Centering Tool
- Cutting Tool Related Equipment
- Step Drill
- Hole Saw
- Clean Key Cutter
- Core Drill (Tip Tool)
- Magnetic Drilling Machine Cutter
- Drill for Electric Drill
- Woodworking Drill Cutter
- Drill for Concrete
- Processing Tools
- Material Handling & Storage
- Tape Supplies
- Cushioning
- Stretch Film
- Cardboard
- Plastic Bag
- PP Band
- Magic Tape / Binding Tape
- Rubber Band
- String / Rope
- Cable Tie
- Label
- Labeler
- Cutter for Unpacking
- Packing Support Equipment
- Cloth / Sheet for Packing
- Carriage / Hand Truck
- Tool Wagon
- Tool Cabinet / Container Rack
- Lifter / Hand Pallet
- Container / Pallet
- Storage Supplies
- Shelf / Rack
- Workbench
- Hanging Clamp / Hanging Belt
- Jack / Winch
- Chain Block / Crane
- Bottle / Container
- Bike Storage
- Safety & General Supplies
- Lab & Clean Room Supplies
- General-purpose Equipment for Research
- Measurement Equipment for Research
- Research Equipment / Storage / Transportation Supplies
- Culture / Separation / Analysis Supplies
- Laboratory Containers
- Laboratory Essentials
- Laboratory Equipment
- Washing / Sterilization / Cleaning Supplies
- Clean Environment-Related Equipment
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components for Molding
- Components of Large Mold, Die Casting
- Injection Molding Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Insert
Select a subcategory
| Days to Ship |
|
|---|
-
Days to Ship: Same Day Stock Items Included
-
Days to Ship: Same Day or more Stock Items Included
-
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: Same Day or more Stock Items Included
-
Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
Tokai
These inserts are the best choice for easy and secure fitment into plastic holes.
- Volume Discount
Days to Ship: 4 Days or more -
Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount
Days to Ship: 4 Days or more -
Ensat, Ultra Coarse Outside Screw, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Days to Ship: Same Day or more Stock Items Included
-
Days to Ship: 4 Days or more -
Days to Ship: Same Day or more Stock Items Included
-
Recoil Packet (mm)【5-10 Pieces Per Package】
Recoil
[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10Days to Ship: 4 Days or more -
MISUMI
Revised Screw Insert. No Need of Breaking Tongue after Insertion. Easy Extraction with a specified tool. Facilitates Insert Operation compared with conventional products.
- Volume Discount
Days to Ship: Same Day or more Stock Items Included
-
E-Certs【1-100 Pieces Per Package】
Precision Tsugami
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.
- Volume Discount
Days to Ship: 4 Days or more -
Ensat Three-Hole/Short 307 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: 4 Days or more -
Recoil
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).
- Volume Discount
Days to Ship: 4 Days or more -
Screwsert (Type SCT)【1-200 Pieces Per Package】
Japan Drive It
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0- Volume Discount
Days to Ship: 4 Days or more -
Recoil
The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.
- Volume Discount
Days to Ship: 4 Days or more -
Days to Ship: Same Day or more Stock Items Included
-
Recoil-Free (mm) SUS304【1-3 Pieces Per Package】
Recoil
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.
- Volume Discount
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Techlock (SL)【1-5,000 Pieces Per Package】
Japan Drive It
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8- Volume Discount
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Tokai
General purpose type. Low cost and well balanced.
- Volume Discount
Days to Ship: 4 Days or more -
Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】
Tokai
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.
- Volume Discount
Days to Ship: 4 Days or more -
Recoil
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).
- Volume Discount
Days to Ship: 4 Days or more -
Brass, Ensat, Screw Plastic Deformation, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.
Days to Ship: 4 Days or more -
Sprue【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcement made from a coiled, rhombic section stainless steel wire. Highly reliable fastening is achieved through ingenious use of spring action.
- Volume Discount
Days to Ship: 4 Days or more -
C-Lock (HCL Type)【100 Pieces Per Package】
Bohsei
Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.
Days to Ship: 4 Days or more -
Thread Insert (Box)【100 Pieces Per Package】
MISUMI
Package-Deal Purchasing recommended for bolts of large volume use.
Days to Ship: 4 Days or more -
Ensat Three-Hole/Short 308 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: 4 Days or more -
Ensat, Chip-Free/Long, Type 338
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
C Lock (CL Type)【100 Pieces Per Package】
Bohsei
The outer knurled form is reversed, which allows for high tensile strength and torque strength.
Days to Ship: 4 Days or more -
Lock Recoil (Millimeter) SUS304
Recoil
Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.
- Volume Discount
Days to Ship: 4 Days or more -
Iron, Ensat, Small Outside Diameter Slotted Type 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: 4 Days or more -
Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】
Sunco
[Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39
[Material] Stainless Steel
[Surface Processing] BareDays to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Sel Locking Fastener SL (Lock)【1,000 Pieces Per Package】
Sel Japan
The optimal nut for preventing vibrating parts working loose, etc. To fix in place, simply press in and tighten with a normal screwdriver. No special tools required.
Days to Ship: 4 Days or more -
Sprue (Unified) (UNC)【1-100 Pieces Per Package】
Nippon Sprew
Screw reinforcer featuring coiling of a diamond shaped stainless steel thread. Can achieve high-reliability tightening by using the springback skillfully.
- Volume Discount
Days to Ship: 4 Days or more -
Days to Ship: 4 Days or more -
Recoil Packet (UNC)【5-10 Pieces Per Package】
Recoil
*Unfortunately, only lengths of 1.5D are available.
Days to Ship: 5 Days or more -
Days to Ship: 4 Days or more -
Iron, Ensat, with Pin/Long Type 318
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.
Days to Ship: 4 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Category |
| Application |
| Material |
| Screw Type |
| Thread Diameter (Inserted) M(mm) |
| Thread Diameter (Inserted) unified(inch) |
| Length (After Insertion) L (D = Screw Shaft Dia. M) |
| Notch |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | KKV | Tokai | Tokai | KKV | MISUMI | MISUMI | Recoil | MISUMI | Precision Tsugami | KKV | Recoil | Japan Drive It | Recoil | MISUMI | Recoil | KKV | MISUMI | Japan Drive It | Accurate | Accurate | Precision Tsugami | Tokai | Tokai | Recoil | KKV | Nippon Sprew | Bohsei | MISUMI | KKV | KKV | KKV | Bohsei | Recoil | KKV | Sunco | MISUMI | MISUMI | Sel Japan | Nippon Sprew | Recoil | Recoil | Recoil | KKV |
| Product Series | Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】 | Dodge Insert Flange Type (Brass Cadmium-Less)【1-600 Pieces Per Package】 | Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】 | |||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Days to Ship |
Same Day
Stock Items Included |
Same Day or more
Stock Items Included |
Same Day or more
Stock Items Included | 4 Days or more | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more |
Same Day or more
Stock Items Included | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 4 Days or more | 5 Days or more | 4 Days or more | 4 Days or more |
| Category | Self-Tapping | Standard | Self-Tapping | Standard | Standard | Self-Tapping | Tool | Tool | Standard | Tangless | Standard | Self-Tapping | Standard | Self-Tapping | Standard | Tool | Standard | Tool | Tool | Press Fitting | Tool | Tangless | Tool | Standard | Standard | Standard | Self-Tapping | Standard | Press Fitting | Standard | Self-Tapping | Self-Tapping | Tool | Press Fitting | Standard | Self-Tapping | Standard | Tool | Tool | Crimped | Standard | Tool | Standard | Tool | Self-Tapping |
| Application | Light Metal | Light Metal | - | General Resin | General Resin | - | - | - | Light Metal | Light Metal | Light Metal / Cast Iron / General Resin | - | Light Metal | General Resin | Light Metal | - | Light Metal | - | - | - | - | Light Metal / Cast Iron / General Resin | - | General Resin | General Resin | Light Metal | - | Light Metal | General Resin | Light Metal | - | - | - | General Resin | Light Metal | - | - | - | - | Light Metal | Light Metal | - | Light Metal | - | - |
| Material | Steel / Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel / Brass | Brass | Brass | Stainless steel (SUS303 / SUS304) / Brass | - | - | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Nitronic 60 | Brass | Stainless steel (SUS303 / SUS304) | - | Stainless steel (SUS303 / SUS304) | Steel | - | Brass | - | Stainless steel (SUS303 / SUS304) | Steel | Brass | Brass | 316 Stainless Steel | Brass | Stainless steel (SUS303 / SUS304) / Phosphor Bronze | Brass | Stainless steel (SUS303 / SUS304) | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | Steel / Stainless steel (SUS303 / SUS304) / 430F Stainless Steel | - | Brass | Stainless steel (SUS303 / SUS304) | Steel | Stainless steel (SUS303 / SUS304) | - | - | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Stainless steel (SUS303 / SUS304) | Steel |
| Screw Type | Metric (coarse) Thread | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | - | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Unify (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | - | Metric (coarse) Thread / Metric (fine) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | - | Metric (coarse) Thread | Metric (coarse) Thread | Metric (coarse) Thread | Metric (fine) Thread | - | - | Metric (coarse) Thread | Unify (coarse) Thread | - | Unify (coarse) Thread | - | Metric (coarse) Thread |
| Thread Diameter (Inserted) M(mm) | 3 ～ 12 | 3 ～ 16 | 2.5 ～ 30 | 2 ～ 10 | 2 ～ 8 | 3 ～ 16 | - | - | 2 ～ 20 | 2.5 ～ 10 | 2 ～ 24 | 3 ～ 16 | 3 ～ 12 | 3 ～ 10 | - | - | 2 ～ 42 | 2.5 ～ 16 | - | 2 ～ 10 | - | 2 ～ 24 | 3 ～ 12 | 1.4 ～ 8 | 2.6 ～ 8 | 3 ～ 16 | 3 ～ 6 | 2 ～ 36 | 3 ～ 6 | 3 ～ 8 | 3 ～ 16 | 3 ～ 16 | 2.5 ～ 30 | 2 ～ 6 | 2.5 ～ 24 | 3 ～ 10 | 6 ～ 39 | - | - | 3 ～ 4 | - | - | - | 10 ～ 18 | 4 ～ 16 |
| Thread Diameter (Inserted) unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1"-8 ～ #12-24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2-13 ～ #12-24 | - | 1/2-13 ～ #12-24 | - | - |
| Length (After Insertion) L (D = Screw Shaft Dia. M) | - | 1D / 1.5D / 2D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | - | - | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D / 0.6D | - | 1D / 1.5D / 2D | 2D / 2.5D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.7D | 1.5D / 2D / 2.5D | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | 1D / 1.5D / 2D | - | - | - | - | 1D / 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | - | 1D / 1.5D / 2D / 2.5D / 3D | - | 1.5D | - | - |
| Notch | No | Presence | - | No | No | - | - | - | Presence | No | Presence | - | Presence | No | Presence | - | Presence | No | - | No | - | No | - | No | No | Presence | - | Presence | - | Presence | - | - | - | - | Presence | - | Presence | - | - | No | Presence | - | Presence | - | - |
| Shape | Slotted | - | Slotted | Standard | Standard | Standard | - | - | - | - | - | 3-Hole Type | - | Standard | - | - | - | - | - | Standard | - | - | - | Standard | Standard | - | Standard | - | Standard | - | 3-Hole Type | Chip-free Type | - | Standard | - | Small Outside Diameter Slotted Type | Standard | - | - | - | - | - | - | - | Type with Pin |
| Sales Unit | - | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | - | - | Box/package | - | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | - | Low Quantity Available beginning with 1 pc. ～ Box/package | - | - | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | - | - | Low Quantity Available beginning with 1 pc. | - | - | Box/package | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. | Low Quantity Available beginning with 1 pc. ～ Box/package | - | - | - | Low Quantity Available beginning with 1 pc. ～ Box/package | Low Quantity Available beginning with 1 pc. | Box/package | Low Quantity Available beginning with 1 pc. | - |
Loading...
Configure
Stock
-
- Stock Items Included
Specification/Dimensions
-
Category
-
Standard
-
Tangless
-
Self-Tapping
-
Tool
-
Crimped
-
Press Fitting
-
Standard
-
Application
-
Material
-
Screw Type
-
Metric / Inch
-
Thread Diameter (Inserted) M(mm)
-
Thread Diameter (Inserted) unified(inch)
- 1"-12
- 1"-8
- 1-3/8-12
- 1-3/8-6
- 1-1/2-12
- 1-1/2-6
- 1-1/4-12
- 1-1/4-7
- 1-1/8-12
- 1-1/8-7
- 1"1/4-7
- 1/2
- 1/2-20
- 1/2-13
- 1/4
- 1/4-28
- 1/4-20
- 2
- #2-56
- #3-56
- 3/4
- 3/4-16
- 3/4-10
- 3/8
- 3/8-24
- 3/8-16
- 4
- #4-48
- #4-40
- #5-40
- 5/8
- 5/8-18
- 5/8-11
- 5/16
- 5/16-24
- 5/16-18
- 6
- #6-40
- #6-32
- 6/16
- 7/8
- 7/8-14
- 7/8-9
- 7/16
- 7/16-20
- 7/16-14
- 8
- #8-36
- #8-32
- 9/16-18
- 9/16-12
- 10
- #10-32
- #10-24
- #12-28
- #12-24
-
Length (After Insertion) L (D = Screw Shaft Dia. M)
-
Notch
-
Shape
-
Sales Unit
Brand
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy