Ejector Sleeves(Product composition:Single sleeve)


Days to Ship
  • All
  • 4 Days or Less
  • 5 Days or Less
  1. 1
Brand
Product Series
CAD
Days to Ship
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape
P (Tip diameter)(mm)

    Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

    • Change
    • Lead Time Reduction

    Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

      Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

      • Lead Time Reduction

      Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

        Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

        • New Products

        Short Ejector Sleeves (Bushings for straight ejector pins)

        • Lead Time Reduction

        Short Ejector Sleeves (Bushings For Ejector Pins)

        • Change
        • Lead Time Reduction

        Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

        • Lead Time Reduction

        Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

        • Change

        Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

          Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

            Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

              Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                • Lead Time Reduction

                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                Brand

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                MISUMI

                Product Series

                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                Short Ejector Sleeves (Bushings for straight ejector pins)

                Short Ejector Sleeves (Bushings For Ejector Pins)

                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                CAD
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                • 2D / 3D
                Days to Ship 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more 4 Days or more 5 Days or more 5 Days or more 5 Days or more 5 Days or more
                Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                MaterialSKH51SKD61SKH51SKD61SKD61SKH51SKD61SKD61SKD61SKD61SKD61SKH51SKD61SKD61SKD61
                Surface treatmentNoNitridedNoNitridedNitridedNoNitridedNitridedNitridedNitridedNitridedNoNitridedNitridedNitrided
                Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)4mm(T4)4mm(T4)
                Shaft diameter tolerance0/-0.005 / -0.01/-0.02-0.01/-0.02 / -0.01/-0.030/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.030/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.020/-0.005-0.01/-0.02-0.01/-0.02-0.01/-0.02
                D/P (Shaft diameter)(mm)3.2 ~ 143.5 ~ 203.2 ~ 143.5 ~ 204 ~ 202.5 ~ 84 ~ 103.5 ~ 103.5 ~ 104 ~ 204 ~ 163 ~ 84 ~ 104 ~ 164 ~ 10
                V (Hole diameter)(mm)0.8 ~ 12.21.5 ~ 160.8 ~ 12.21.5 ~ 160.5 ~ 151 ~ 6.81.5 ~ 81.5 ~ 7.91.5 ~ 81.5 ~ 151.5 ~ 3001 ~ 61.5 ~ 81.5 ~ 121.5 ~ 8
                Concentricity between the hole and shaft diameters◎0.005 / ◎0.01◎0.06◎0.01◎0.06◎0.06◎0.01◎0.06◎0.03◎0.03◎0.06◎0.06◎0.005◎0.03◎0.06◎0.03
                Boring methodGrindingReamingWire cutting & polishingReamingReaming-ReamingReamingReamingReamingReamingGrindingReamingReamingReaming
                Inner dia. tolerance+0.005/0 / +0.01/0H7+0.01/0H7H7+0.005/0 / +0.01/0H7H7H7H7H7+0.005/0H7H7H7
                Tapered or notNoNoNoNoNoYesNoNoNoNoNoYesNoNoNo
                Center pin tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo
                P (Tip diameter)(mm)-----------2.5 ~ 8---

                Loading...

                1. 1

                Related Categories to Ejector Sleeves