Timing Pulleys & Idlers（Page2）

Timing Pulleys and Idlers are toothed gears that mesh with a belt rather than each other. They are lubrication-free, corrosion-resistant, and have reduced noise and cost impact when compared to traditional chain and sprocket mechanisms. There are many tooth profiles to handle a variety of applications. Trapezoidal profiles like "L," "T," and "AT" are great for conveyance, where the belt will be running for hours continuously. Curvilinear profiles like "S#M," "GT," and "EV" are ideal for high-torque positioning applications where the belt will need to change directions often and require low backlash.

About Timing Pulleys, Idlers

Unit		Imperial Series (inch)				Metric Series (mm)
Application		General				Light Load Conveyance	Heavy Load Conveyance	High Torque		Super High Torque		High Accuracy Positioning	NEW High Positioning Accuracy, High Torque
Belt Type		MXL	XL	L	H	T5,T10	AT5,AT10	S2M-S14M	P2M-P8M	UP5M-UP8M	MTS8M	2GT-EV8YU	MR2-MR5
Pitch		0.800"	0.200"	0.375"	0.5"	5,10 mm	5,10 mm	2,3,5,8,14 mm	2,3,5,8 mm	5,8 mm	5 mm	2,3,5,8 mm	2,3,5 mm
Tooth Profile		Trapezoidal				Trapezoidal		Curvilinear Circular (S-Type)	Curvilinear with Dimple (R-Type)	Curvilinear Circula (S-Type)	Curvilinear with Dimple (R-Type)	Circular Round (H-Type)	Curvilinear Circular (GT2-Type)
Backlash		Medium				Medium	Low	Low*		Low*		Very Low	Very Low
Endless Belt		check				check		check		check		check	check
Open End Belt		-	check			check		check (selected pitches)		-		-	check
Belt Material (Tension Cord)		Rubber (Glass Fiber)			-	Polyurethane (Steel Cord)		Chloroprene Rubber (Glass Fiber)		Chloroprene Rubber (Glass Fiber)	Rubber (Glass Fiber)	Chloroprene Rubber (Glass Fiber)	Neoprene Rubber (Glass Fiber)
Belt Material (Tension Cord)		Polyurethane (Kevlar/Steel Cord)				Polyurethane (Steel Cord)		Polyurethane(Aramid Fiber) (S2M,S3M,S5M only)		Chloroprene Rubber (Glass Fiber)	Rubber (Glass Fiber)	Chloroprene Rubber (Glass Fiber)	Neoprene Rubber (Glass Fiber)
Typical Applications	Conveying	check				check	check	-	-	-	-	-	check
	Positioning	-				-	check	check	check	check	check	check	check
	Power Transmission	-				-	-	check	check	check	check	check	check
	High Speed	check				check	-	check	check	check	check	check	check

*MISUMI offers Special Zero Backlash S8M pulleys (For use with S-Type belts only)

Filter by Type

98 items

Hide Filters XFilter Results

Activating the following links will update the content below

Filter By:

Show products with stock items

AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as Same Day

Stock Items Included
MXL, XL, S2M, S3M, S5M Timing Belt Pulley - Configurable Width

MISUMI

Timing Pulleys with the pulley width configurable in 1mm increment

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
Idler Shaft

MISUMI

MISUMI Idlers Idler Shaft offers reliable support and stability by efficiently managing tension in various applications. Designed to optimize performance in conveyor systems and machinery, the idler shaft ensures consistent operation and minimal wear over time. Providing a durable solution, this product effectively minimizes friction and enhances the lifespan of associated components without compromising efficiency. Ideal for industrial environments, MISUMI idler shafts contribute to seamless operations, reducing downtime and maintenance costs while maintaining high performance standards.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as Same Day

Stock Items Included
T2.5 Timing Belt Pulley

MISUMI

Small pitch timing pulley suitable for small machines.

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
P5M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
T5 Timing Belt Pulley - Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
L, H Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S3M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
T10 Timing Belt Pulley - Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
MXL Timing Pulley Bar Stock and Flanges

MISUMI

MISUMI MXL Timing Pulley Stock and Flange delivers reliable performance by utilizing high-quality aluminum alloys, specifically the 2000 and 5000 series. Designed to facilitate precise timing belt applications, this pulley ensures optimal synchronization and motion transfer across various mechanical systems. Providing a lightweight yet durable solution, MXL Timing Pulley effectively minimizes wear and enhances operational efficiency without compromising structural integrity. Ideal for diverse industrial environments, this product promotes longevity and consistent performance in demanding applications.

Volume Discount Available

Lead Time Reduction

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
S8M Timing Belt Pulley - Reduced Backlash

MISUMI

Timing pulleys with backlash significantly reduced compared to the conventional pulleys.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
L Timing Belt Pulley - Standard Keyless Bushing

MISUMI

MechaLock Standard Type incorporated Timing Pulley with centering function.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
L Timing Belt Pulley - Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
T5, T10 Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 6 Days
H Timing Belt Pulley - Standard Keyless Bushing

MISUMI

MechaLock Standard Type incorporated Timing Pulley with centering function.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
MXL Timing Belt Pulley - Inch Bore

MISUMI

MISUMI MXL Timing Pulley inch bore offers reliable precision and efficiency by utilizing high-quality aluminum alloy 2000 series and steel materials. Designed to provide optimal timing belt performance, the pulley ensures smooth operation and accurate torque transmission across various mechanical systems. Providing a durable solution, this timing pulley effectively reduces wear and tear while maintaining alignment without compromising dimensional stability. Ideal for applications requiring dependable power transfer, it enhances overall system reliability and longevity.

Lead Time Reduction

Available in INCH

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] XL Timing Belt Pulley

MISUMI

0.200" Pitch, General use Trapezoidal tooth profile often used in conveying or high speed applications.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
S5M Timing Belt Pulley - High Torque, Standard Keyless Bushing

MISUMI

5mm pitch. MechaLock Standard Type incorporated Timing Pulley with centering function. For High torque applications, curvilinear circular S-Type tooth profile.

Clean processed version also available, please click Here.

Volume Discount Available

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 4 Days
S2M, S3M Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 5 Days
[Clean & Pack] GT1.5, GT2 Timing Belt Pulley - High Torque

MISUMI

Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
XL Timing Belt Pulley - Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
L, H Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] Keyless High Torque Timing Pulley - S3M, MechaLock Standard Built-in

MISUMI

3mm pitch. MechaLock Standard Type incorporated Timing Pulley with centering function. For High torque applications, curvilinear circular S-Type tooth profile.

Volume Discount Available

CAD Available in 2D and 3D
Configure Now

Ships as soon as 5 Days
H Timing Belt Pulley - Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] MXL Timing Belt Pulley

MISUMI

0.08" Pitch, General use Trapezoidal tooth profile often used in conveying or high speed applications.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] S5M Timing Belt Pulley

MISUMI

5mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] GT5 Timing Belt Pulley - High Torque

MISUMI

Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] L Timing Belt Pulley

MISUMI

Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
P8M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
Backside Tension Timing Idler Pulley - Inch Bore

MISUMI

• Pulleys/Idlers: Idlers (Bearing Built-in)
• Type: Timing Pulleys
• Material: Aluminum Alloy 2000 series
• Surface Treatment: Clear Anodize

Volume Discount Available

Lead Time Reduction

Available in INCH

CAD Available in 2D and 3D
Configure Now

Ships as soon as Same Day

Stock Items Included
[Clean & Pack] S3M Timing Belt Pulley

MISUMI

3mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] GT3 Timing Belt Pulley - High Torque

MISUMI

Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
S8M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing

MISUMI

Phase matching is easy because machining to shafts is not required.

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] S2M Timing Belt Pulley

MISUMI

2mm pitch. For High torque applications, curvilinear circular S-Type tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] P8M Timing Belt Pulley - High Torque

MISUMI

Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
H Timing Belt Pulley - Inch Bore

MISUMI

MISUMI H Timing Pulley - Inch Bore delivers reliable power transmission by utilizing precision-engineered teeth that mesh seamlessly with compatible timing belts. Designed to facilitate accurate synchronization in various mechanical applications, this pulley ensures minimal slippage, promoting efficient operation across industrial environments. Providing a robust aluminum alloy 7000 series or steel construction, MISUMI H Timing Pulley withstands wear and tear, effectively enhancing longevity without compromising performance or reliability.

Lead Time Reduction

Available in INCH

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
[Clean & Pack] H Timing Belt Pulley

MISUMI

Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] T5 Timing Belt Pulley

MISUMI

Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

Volume Discount Available

CAD Available in 2D and 3D
Configure Now

Ships as soon as 5 Days
[Clean & Pack] P3M Timing Belt Pulley

MISUMI

P3M (3 mm pitch) tooth profile timing pulley.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] 8YU Timing Belt Pulley - High Torque

MISUMI

Circular Tooth Profile Pulleys with little backlash, suitable for positioning.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] MXL, XL, S2M, S3M, S5M Timing Belt Pulley - Configurable Width

MISUMI

MXL(0.8" pitch), XL(0.2" pitch), S2M(2 mm pitch), S3M (2 mm pitch) and S5M (5mm pitch) tooth profile.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
[Clean & Pack] AT10 Timing Belt Pulleys

MISUMI

AT10 (10 mm pitch) tooth profile timing pulley.
Two types of cleaning methods are available: degreasing and precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing) : Part Number SL-□□
·Precision cleaning (Degassing double packing) : Part Number SH-□□

CAD Available in 2D and 3D

Configure Now

Ships as soon as 5 Days
S14M Timing Belt Pulley - High Torque

MISUMI

Note: Flanges are not fixed on the pulley.

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
P5M, P8M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 7 Days
AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Center Bearing

MISUMI

Can be used as the tension adjuster for timing belts or as the pulley on the driven side.

Volume Discount Available

Spec Change

Rapid Design

CAD Available in 2D and 3D
Configure Now

Ships as soon as 6 Days


Brand
Product Series
CAD
Days to Ship
Specifications
Type
Belt Shape
Belt Width (in)
Belt Width (mm)
Number of Teeth(T)
Pulley Shape
Material
Surface Treatment
Cleaning Method
RoHS Compliance

	Spec Change	Spec Change			Spec Change	Spec Change		Spec Change	Spec Change	Lead Time Reduction	Spec Change	Spec Change	Spec Change	Spec Change	Spec Change	Lead Time Reduction			Spec Change		Spec Change	Spec Change		Spec Change					Spec Change	Lead Time Reduction			Spec Change			Lead Time Reduction								Spec Change	Spec Change
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	MXL, XL, S2M, S3M, S5M Timing Belt Pulley - Configurable Width	Idler Shaft	T2.5 Timing Belt Pulley	P5M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing	T5 Timing Belt Pulley - Standard or Short Keyless Bushing	L, H Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	S3M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing	T10 Timing Belt Pulley - Standard or Short Keyless Bushing	MXL Timing Pulley Bar Stock and Flanges	S8M Timing Belt Pulley - Reduced Backlash	L Timing Belt Pulley - Standard Keyless Bushing	L Timing Belt Pulley - Standard or Short Keyless Bushing	T5, T10 Flanged Timing Idler Pulleys - Teeth, Center Bearing	H Timing Belt Pulley - Standard Keyless Bushing	MXL Timing Belt Pulley - Inch Bore	[Clean & Pack] XL Timing Belt Pulley	S5M Timing Belt Pulley - High Torque, Standard Keyless Bushing	S2M, S3M Flanged Timing Idler Pulleys - Teeth, Center Bearing	[Clean & Pack] GT1.5, GT2 Timing Belt Pulley - High Torque	XL Timing Belt Pulley - Standard or Short Keyless Bushing	L, H Flanged Timing Idler Pulleys - Teeth, Center Bearing	[Clean & Pack] Keyless High Torque Timing Pulley - S3M, MechaLock Standard Built-in	H Timing Belt Pulley - Standard or Short Keyless Bushing	[Clean & Pack] MXL Timing Belt Pulley	[Clean & Pack] S5M Timing Belt Pulley	[Clean & Pack] GT5 Timing Belt Pulley - High Torque	[Clean & Pack] L Timing Belt Pulley	P8M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing	Backside Tension Timing Idler Pulley - Inch Bore	[Clean & Pack] S3M Timing Belt Pulley	[Clean & Pack] GT3 Timing Belt Pulley - High Torque	S8M Timing Belt Pulley - High Torque, Standard or Short Keyless Bushing	[Clean & Pack] S2M Timing Belt Pulley	[Clean & Pack] P8M Timing Belt Pulley - High Torque	H Timing Belt Pulley - Inch Bore	[Clean & Pack] H Timing Belt Pulley	[Clean & Pack] T5 Timing Belt Pulley	[Clean & Pack] P3M Timing Belt Pulley	[Clean & Pack] 8YU Timing Belt Pulley - High Torque	[Clean & Pack] MXL, XL, S2M, S3M, S5M Timing Belt Pulley - Configurable Width	[Clean & Pack] AT10 Timing Belt Pulleys	S14M Timing Belt Pulley - High Torque	P5M, P8M Flanged Timing Idler Pulleys - Teeth, Both Sides Bearing	AT5, AT10 Flanged Timing Idler Pulleys - Teeth, Center Bearing
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Days to Ship	Same Day Stock Items Included	7 Days	Same Day Stock Items Included	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	6 Days	7 Days	7 Days	5 Days	4 Days	5 Days	5 Days	7 Days	7 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	7 Days	Same Day Stock Items Included	5 Days	5 Days	7 Days	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	6 Days
Specifications	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design		Rapid Design	Rapid Design	Rapid Design	Rapid Design	Rapid Design	Available in INCH		Rapid Design	Rapid Design		Rapid Design	Rapid Design		Rapid Design					Rapid Design	Available in INCH			Rapid Design			Available in INCH							Rapid Design	Rapid Design	Rapid Design
Type	Idlers with Teeth	Timing Pulleys	Idlers	Timing Pulleys	Keyless Pulley	Keyless Pulley	Idlers with Teeth	Keyless Pulley	Keyless Pulley	Timing Pulleys	Timing Pulleys	Keyless Pulley	Keyless Pulley	Idlers with Teeth	Keyless Pulley	Timing Pulleys	Timing Pulleys	Keyless Pulley	Idlers with Teeth	Timing Pulleys	Keyless Pulley	Idlers with Teeth	Keyless Pulley	Keyless Pulley	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Keyless Pulley	Timing Pulleys	Timing Pulleys	Timing Pulleys	Keyless Pulley	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Timing Pulleys	Idlers with Teeth	Idlers with Teeth
Belt Shape	AT5 ～ AT10	S2M ～ XL	-	T2.5	P5M	T5	H ～ L	S3M	T10	MXL	S8M	L	L	T5 ～ T10	H	MXL	XL	S5M	S2M ～ S3M	1.5GT ～ 2GT	XL	H ～ L	S3M	H	MXL	S5M	5GT	L	P8M	-	S3M	3GT	S8M	S2M	P8M	H	H	T5	P3M	8YU	S2M ～ XL	AT10	S14M	P5M ～ P8M	AT5 ～ AT10
Belt Width (in)	-	-	-	-	-	-	0.50 in (1/2") ～ 2.00 in (2")	-	-	-	-	0.5 ～ 1.50 in (1-1/2")	0.5 ～ 1.50 in (1-1/2")	-	0.75 ～ 2.00 in (2")	0.25 in (1/4") ～ 0.37 in (3/8")	0.25 ～ 0.50 in (1/2")	-	-	-	0.50 in (1/2")	0.50 in (1/2") ～ 2.00 in (2")	-	0.75 ～ 2.00 in (2")	0.13 ～ 0.5	-	-	0.5 ～ 1.5	-	-	-	-	-	-	-	1.00 in (1") ～ 2.00 in (2")	0.75 ～ 3	-	-	-	-	-	-	-	-
Belt Width (mm)	10 ～ 25	4 ～ 25	-	7	10 ～ 15	10 ～ 25	12.7 ～ 50.8	10 ～ 15	15 ～ 50	-	15 ～ 40	12.7 ～ 38.1	12.7 ～ 38.1	10 ～ 25	19.1 ～ 50.8	-	6.4 ～ 12.7	10 ～ 25	4 ～ 15	4 ～ 9	12.7	12.7 ～ 50.8	10	19.1 ～ 50.8	3.2 ～ 12.7	10 ～ 25	9 ～ 15	12.7 ～ 38.1	15 ～ 25	-	6 ～ 15	6 ～ 15	15 ～ 40	4 ～ 10	15 ～ 40	-	19.1 ～ 76.2	5 ～ 25	6 ～ 15	15 ～ 25	4 ～ 25	15 ～ 25	40 ～ 60	10 ～ 25	10 ～ 25
Number of Teeth(T)	14 ～ 36	14 ～ 72	-	14 ～ 60	22 ～ 72	22 ～ 60	12 ～ 36	34 ～ 72	15 ～ 60	10 ～ 72	18 ～ 60	14 ～ 72	14 ～ 72	14 ～ 30	14 ～ 50	14 ～ 72	10 ～ 72	20 ～ 72	20 ～ 60	14 ～ 60	20 ～ 72	12 ～ 30	40 ～ 72	14 ～ 50	14 ～ 72	14 ～ 72	14 ～ 60	10 ～ 50	20 ～ 60	-	14 ～ 72	16 ～ 60	18 ～ 72	14 ～ 72	20 ～ 60	14 ～ 72	14 ～ 36	12 ～ 60	10 ～ 40	20 ～ 60	14 ～ 72	14 ～ 48	28 ～ 56	20 ～ 36	16 ～ 36
Pulley Shape	-	Shape A	-	Shape B / C Type	Shape E / Shape F	Shape E / Shape F	-	Shape E / Shape F	Shape E / Shape F	-	Shape A / Shape B	Shape E / Shape F	Shape E / Shape F	-	Shape E / Shape F	Shape B	Shape A / Shape B	Shape E / Shape F	-	Shape A / Shape B	Shape E / Shape F	-	Shape E	Shape E / Shape F	Shape A / Shape B / C Type	Shape A / Shape B	Shape A / Shape B	Shape A / Shape B	Shape E / Shape F	-	Shape A / Shape B / C Type	Shape A / Shape B	Shape E / Shape F	Shape A / Shape B / C Type	Shape A / Shape B	Shape A / Shape B	Shape A / Shape B	Shape A / Shape B	Shape A / Shape B / C Type	Shape A / Shape B	Shape A	Shape A / Shape B	Shape A / Shape B	-	-
Material	Aluminum ～ Stainless Steel	Aluminum	-	Aluminum	Aluminum	Aluminum	Aluminum ～ Steel	Aluminum ～ Steel	Aluminum ～ Steel	Aluminum	Aluminum	Aluminum ～ Steel	Aluminum ～ Steel	Aluminum ～ Stainless Steel	Aluminum ～ Steel	Aluminum	Aluminum ～ Stainless Steel	Aluminum ～ Steel	Aluminum ～ Stainless Steel	Aluminum	Aluminum ～ Steel	Aluminum ～ Steel	Stainless Steel	Aluminum ～ Steel	Aluminum ～ Stainless Steel	Aluminum ～ Stainless Steel	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum ～ Stainless Steel	Aluminum	Aluminum ～ Steel	Aluminum ～ Stainless Steel	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Aluminum	Steel	Aluminum ～ Steel	Aluminum ～ Stainless Steel
Surface Treatment	Clear Anodize ～ Not Provided	Clear Anodize	-	Clear Anodize	Black Oxide Coating ～ Electroless Nickel Plating	Clear Anodize ～ Hard Clear Anodize	Black Oxide Coating ～ Not Provided	Black Oxide Coating ～ Hard Clear Anodize	Black Oxide Coating ～ Hard Clear Anodize	-	Black Oxide Coating ～ Not Provided	Black Oxide Coating ～ Not Provided	Black Oxide Coating ～ Hard Clear Anodize	Clear Anodize ～ Not Provided	Black Oxide Coating ～ Not Provided	Clear Anodize	Black Anodize ～ Not Provided	Black Oxide Coating ～ Not Provided	Clear Anodize ～ Not Provided	Clear Anodize	Black Oxide Coating ～ Clear Anodize	Black Oxide Coating ～ Not Provided	Not Provided	Black Oxide Coating ～ Electroless Nickel Plating	Black Anodize ～ Not Provided	Black Anodize ～ Not Provided	Clear Anodize	Black Anodize ～ Hard Clear Anodize	Black Oxide Coating ～ Hard Clear Anodize	Clear Anodize	Black Anodize ～ Not Provided	Clear Anodize	Black Oxide Coating ～ Hard Clear Anodize	Black Anodize ～ Not Provided	Clear Anodize ～ Hard Clear Anodize	Black Oxide Coating ～ Clear Anodize	Black Anodize ～ Hard Clear Anodize	Black Anodize ～ Hard Clear Anodize	Clear Anodize	Clear Anodize	Clear Anodize	Black Anodize ～ Hard Clear Anodize	Black Oxide Coating ～ Not Provided	Black Oxide Coating ～ Not Provided	Clear Anodize ～ Not Provided
Cleaning Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Degreasing / Precision Cleaning	-	-	Degreasing / Precision Cleaning	-	-	Degreasing / Precision Cleaning	-	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	-	-	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	-	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	-	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	Degreasing / Precision Cleaning	-	-	-
RoHS Compliance	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Configure

Brand

- MISUMI (97)
- C-Value ()
- Mitsuboshi Belting (1)
Clear

Filters

Belt Shape
1.5GT

2GT

P2M

S2M

MR2 (for PowerGrip® GT®3)

T2.5

3GT

P3M

S3M

MR3 (for PowerGrip® GT®3)

5GT

AT5

P5M

S5M

T5

MR5 (for PowerGrip® GT®3)

8YU

P8M

S8M

AT10

T10

S14M

H

L

MXL

XL
Details

Clear

Metric / Inch
- metric
- inch
Clear

Belt Width Used
Belt Width (in)
0.13

0.13 (1/8")

0.13 in (1/8")

0.19

0.19 in (3/16")

0.25

0.25 in (1/4")

0.31

0.31 in (5/16")

0.37

0.37 in (3/8")

0.5

0.50 in (1/2")

0.75

0.75 in (3/4")

1

1.00 in (1")

1.5

1.50 in (1-1/2")

2

2.00 in (2")

3

3.00 in (3")
Clear
Belt Width Used
Belt Width (mm)
3.2

3.3

4

4.8

5

6

6.4

7

7.9

9

9.5

10

12

12.7

15

18

19.1

20

25

25.4

26

28

30

31

38.1

40

50

50.8

60

76.2

100
Clear

Number of Teeth(T)
10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

62

64

68

72
Clear

Pulley Shape
- Shape A
- Shape B
- C Type
- W Type
- Shape E
- Shape F
Images

Clear

Material
Aluminum

Resin

Stainless Steel

Steel
Clear

Surface Treatment
Black Anodize

Black Oxide Coating

Clear Anodize

Electroless Nickel Plating

Hard Clear Anodize

Not Provided
Clear

Cleaning Method
- Degreasing
- Precision Cleaning
Clear

RoHS Compliance
- RoHS Compliant (10 Substances)
Clear

CAD

- 2D
- 3D
Clear

Days to Ship

All

Same Day

3 Days or Less

4 Days or Less

5 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

9 Days or Less

10 Days or Less

12 Days or Less
Clear

Application example related to this category

back next

Related Categories to Timing Pulleys & Idlers

- Timing Belts
- Timing Pulleys & Idlers

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□

Timing Pulleys & Idlers（Page2）

Filter by Type

Configure

Brand

Filters

Belt Shape

Metric / Inch

Belt Width Used

Belt Width (in)

Belt Width Used

Belt Width (mm)

Number of Teeth(T)

Pulley Shape

Material

Surface Treatment

Cleaning Method

RoHS Compliance

CAD

Days to Ship

Application example related to this category

Related Categories to Timing Pulleys & Idlers